GIMP :: Banner To Look Embedded Into Wall
Apr 27, 2013I'm using the brick wall background, and I would like my banner to look like it is embedded in the wall itself, almost like pressed text. Is there a way to possibly to this?
View 2 Replies
ADVERTISEMENT
3ds Max :: Create Animation Of A Cloth Banner Attached To A Wall
Mar 18, 2011I need to create an animation of a cloth banner attached to a wall. The bottom of the banner will be either held up, or rolled up. Then I want it to be released, revealing what is on the banner.
Are there any tutorials showing how to set up cloth using physX?
Revit :: Cut Pattern Of Embedded Structure Transparent To Wall
Dec 12, 2012We have a structure model linked into our architectural model, where some structure will be located within the wall. The cut pattern of structure is not always showing on top of (opaque) the wall cut pattern. Sometimes the cut pattern appears transparent with the wall cut pattern running through the structural member.
I tried playing with this in a fresh project with just a C channel in a wall. Sometimes it shows opaque and sometimes transparent depending on the position of the channel in the wall. I would try making the member flat at different elevations and sloped at different elevations and they all had different graphic display behavior. Then I tried duplicating the wall and channel to have two sets to play with simultaneously. Modifying the elevation or slope in one would actually change the graphics of the other, when the other didn't move.
I've tried checking/unchecking the following parameters within the project and family without any effect: structural material, structural, show pre-cut in plan, and always vertical. Not only am I assuming that the structural cut pattern should be opaque over the wall's cut pattern, but I can't even identify what is causing it to change with different elevation/slope settings.
I will attach 2 screenshots. The one titled opaque is the desired effect.
GIMP :: Embedded Path In JPG Not Available
Feb 8, 2012j pgs can contain paths info. In Photoshop you'll be able to get that path.
We use it a lot for packshots, this way we can save a JPG, but with an embedded outline Path, this way you'll always be able to "cut out" the packshot by selecting the path.
It does not work with gimp .
GIMP :: How To Widen Website Banner
Feb 28, 2012I want to widen my website banner image from 950px to cover the whole width of the screen no matter what resolution or monitor
it's the blue image at [URL].......
I want to position the logo and the words exactly where they are right now but 'stretch' the image along with its shading gradient, right across the screen.
GIMP :: Animate Words For A Banner?
Jan 20, 2012so i am trying to animate words for a banner, but every time i create a word for a layer it makes a new layer, i need to find out how to get words on one layer so that i can animate them to move the way i want them to (i need three words on one layer, so i can move them around and all using animation with a .gif file.
View 2 Replies View RelatedGIMP :: Delete A Layer In A Banner
May 30, 2012I want to delete a layer in a banner. I am a novice with gimp and looked to a tutorial to find out how. It says:
Go to File > Dialogs > Choose Layers or just hit CTRL-L. This opens up the Layers Dialog (or window).
The problem is there is no dialogue option in file. I do not know what to do.
file:///C:/Users/michael/Desktop/gimp.htm
GIMP :: Make Banner Shaking?
Jun 24, 2013I want to make my banner shaking
View 3 Replies View RelatedGIMP :: Bottom Of Banner Is Fuzzy?
Jun 2, 2013I have created this over and over, and it seems every time, the bottom comes out fuzzy. What would be the best way for the bottom "triangle" to be straight like the sides and top?
View 17 Replies View RelatedGIMP :: How To Make A 800x175 Banner
Aug 23, 2011How to make a banner that is 800x175, and I want an image at each end and text in the middle. How to put an image in here i tried to copy/paste a .jpg and a .png but it wouldn't do it. Anyway i want to fade the edges of the images to match the background, so it all looks like one seamless image.
View 4 Replies View RelatedGIMP :: How To Get Text To Go Vertical For Banner
Jun 19, 2006I'm trying to make vertical banners, and I need to get the text to go vertical......how do I do that? I've dug through all of the text tool options I could find, and pretty much anything I could think of, and still no luck.
View 8 Replies View RelatedGIMP :: Embedded Non Graphic Data?
Nov 9, 2012I have been told that some, many, or most cameras record non graphic data in the image file such as name of the camera owner, date of photograph, etc. or that other methods may have been used to record such data or edit it.
A.
Is this true
B.
Is it true of all image file formats
C.
If it is true how does one view this data.
D.
Is this data useful for copyright purposes
GIMP :: How To Modify And Save Banner For Website
Jan 25, 2013I am building my first website for myself. I am using Elegant Themes, which uses WordPress. I am attempting to modify (reduce in size) a banner on my website, which appears within a slider on the homepage. After modifying the image in Gimp 2.8, I attempt to save/export the new image, and a window appears "The folder contents could not be displayed." How can I proceed?
View 1 Replies View RelatedGIMP :: Change Background Of Banner To Transparent?
Feb 8, 2011I made a web banner (728 x 90) but forgot to set the background to beingtransparent (so the web page background can show through).
Do you know how I can easily change the background of the banner totransparent?
GIMP :: Multiple Photos For Etsy Banner
Dec 29, 2012I've been trying to make a banner for Etsy using a couple of my own photos but I can't seem to get more than one photo to cooperate.
Here's the tutorial I've been using: How to Produce an Etsy Shop Banner in GIMP
I'm able to get the first photo situated but when I try to add more, the image won't scale down correctly like the first one did. Am I doing something wrong? Can I even add multiple photos to the same banner using this method?
GIMP :: Embedded Thumbnail As Preview Image?
Sep 1, 2013I was just choosing a JPG to open in the gimp Open Image dialog andwhen I clicked on the image to open, I think the preview thumbnail wasof the same image in an uncropped and unprocessed form. Does gimp usesome type of embedded thumbnail as a preview image?
View 2 Replies View RelatedGIMP :: Adding Yin Yang Sign At The End Of Text Banner?
Aug 16, 2012I want the yin yang sign at the end of my text banner. how to do that?
View 3 Replies View RelatedGIMP :: How To Create A Banner With Colorful Zebra Print
Aug 16, 2012How to create a banner with colorful zebra print on the inside of the text and a sparkly black glitter border on the outside of the text? I can't find any zebra glitter fills .
View 1 Replies View RelatedGIMP :: Convert Other Embedded Color Profiles To RGB Built It?
Dec 19, 2013is it really necessary to convert other embedded color profiles to RGB built it? Gimp asks me from time to time if I want to convert Adobe RGB 1998 or Camera RGB Profile or CYMK to built in RGB. is this necessary to do or can I keep the profile? I usually convert...
View 1 Replies View RelatedGIMP :: How To Make A Banner That Shakes / Blurs From Side To Side
Nov 27, 2012How to make a banner that shakes/blurs from side to side?
[URL]....
The link above is an image of what I'm talking about. (The black banner that says Diamonds aren't forever)
GIMP :: Write Text In A Wall Inside Image
Apr 10, 2013I have some images, this image contain a real picture of house from outside with a wall in front. I want to wrtite a word in that wall in a way that people will see this picture will think that the word is wrotten to wall of house and not guess that it is made by a software.
Also, suppose that there is already a word written in the wall, is it possible to replace that word with some other word, in a way that people will not guess it is made by a software.
Revit :: How To Get Wall Sweep Set Up In Type / Structure Properties To Wall Profile Has Changed
Apr 12, 2012Any way to get a wall sweep that's set up in the type/structure properties to follow a wall if that walls profile has changed. For example, in the image below, I've split the wall and adjusted it's profile to create some cheesy angled parapet. How do i get my wall cap to follow along? I thought splitting it and changing it's height would work, but no. And if I change the profile without splitting the wall the wall cap just runs right through the wall, as if the profiel was never even changed.
View 3 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Construct Wall Centerline In The Middle Of Wall?
Sep 13, 2013i need a lisp that construct line between two lines of wall by selection called (Wall Centerline)
i attach example of what i want assuming that i will often isolate wall layer in the project to facilitate the task.
AutoCAD Architecture :: Make Cylinder Wall Or Closed Curved Wall?
Jun 3, 2013I can make a curved wall, now I need to make a "cylinder" wall or a closed curved wall. If a curved wall can be closed I cannot figure it out.
View 4 Replies View RelatedRevit :: Bulkhead Wall Join Skews Bottom Of Existing Wall
Jul 25, 2013I have to draw a bulkhead wall that connects to a full height wall and a gyp bd ceiling. This causes the entire end of the full height wall to skew in line with the butt joint above the ceiling level. I tried Wall Joins but all the options screw up the bottom half of the wall which needs to remain in line with the paired opposite. I also tried editing the sketch of the wall profile but Revit couldn't keep the elements joined. I tried trimming the two walls back together afterwards but the wall profile dominates and prevents a clean join above the ceiling.
Surely there's a way to have different kinds of joins at different heights?
AutoCAD Civil 3D :: 2012 Retaining Wall Assembly And Wall Height?
Jul 23, 2012I am using the RetainWallVertical subassembly with a created gutter subassembly attached to the wall and a DaylightGeneral subassembly attached to the gutter assembly. My cut slope parameter is set to hold at 1.5:1. I would like to use a target (feature line or alignment) to daylight to and have the wall height adjust accordingly. Problem, I am not able to use a target other than a surface for daylighting. I can use my existing ground surface, which I am daylighting too, but I can't adjust the target point.
View 2 Replies View RelatedAutoCAD Architecture :: Wall Style Creation (Window To Cut Only One Portion Of Wall)
Dec 7, 2011I'm attempting to create a wall style that has 2 components, a framed wall and a brick veneer. What I would like to do is have this wall react a certain way when I insert a window. Basically, I don't want the window to cut into the brick veneer, only the framing.
I have attached my attempt so far, and I have not figured out how to get the window to only cut the framed portion.
Revit :: How To Align Curtain Wall With Edge Of Concrete Slab / Face Of Wood Framed Wall
Dec 4, 2012I am trying to align the curtain wall with the edge of the concrete slab/face of wood framed wall (Core). I have tried to align and move however the whole wall moves as well as the edge of the slab. How I can move the Curtain wall leaving the other elements in place?
View 2 Replies View RelatedRevit :: How To Cut Red Part Of Wall 1 / Hole In Wall 2 By Blue Rectangle
Nov 27, 2011Refer to the attached file. How can I cut the RED part of the Wall 1 (W1) , where Wall 2 is sloped. I also want to cut a hole in wall 2 (W2) by the BLUE rectangle , but why I can't do that .
I also want to add a second floor to my project but I can only see the" Level" icon goes grey and I can't click it.
AutoCAD Architecture :: Wall Intersection Clean Up For Different Wall Types
Jun 12, 2012I am having trouble cleaning up different wall types joining at or close to a corner. I tried to over ride the clean up radius....no luck.
View 9 Replies View RelatedRevit :: Changing Length Of A Wall And Wall Type?
Oct 31, 2013When I try to change the length of a wall it grows at both end. How to grow at one end only?
When I change the wall type to one with a different thickness, I cannot control which face of the wall remains fixed and which face moves. eg: change from 130mm to 250mm screws up my room width. How do I do this?