Say you have a flattened image, a solid background and text of a differrent colour.
If you wanted to change the colour of the text is there some trick to simultaneously changing the pixels around the letters with slightly different hues (because of the antialiasing) into a relative colour?
i have attached a gif image of a letter zoomed in to give an example.
If you wanted to alter that text to say red could you do it?
I am building a site for a client, and as such they employed the services of a graphic designer to design a company logo. Well the client has chosen one of the logos but the colors do not fit in as well with the sit layout as one would desire. I approached the graphic designer to request changes for the client, but they sent me the files and said I can modify them in Photoshop.
The trouble is, I don't use PS. How to make the appropriate changes using Xara? I did try to highlight the text but I think it may all be part of an object with the razor. I wanted to convert the larger text to white and export everything from a dark background so it doesn't have the white jagged edge you would see from a white background.
I just tried to upload the ps but it is 800kb..
Link is [URL]......
I am trying to alter or create a colorspace preset/profile that would allow me to open a digital image in Lightroom or Photoshop that ultamately changes the colorspace to one that simulates the view of a dog. All I really have to go on is the two spctrums shown in the image below.
View 11 Replies View Relatedwhy do some of the changes appear to revert when i flatten an image in cc
View 2 Replies View RelatedI'm trying to flatten an image with a gradient. This was originally a RAW image. My photos keep having this "C" with circles around it (as seen in Photo 2).
View 1 Replies View RelatedI've been using Ps for a while, but i don't really know an efficient way to flatten just 1 layer. 1 way is to put the layer by itself, but this takes time. Is there another way to do this? The effect would be changing an effect (fx tabs, strokes etc) into part of the image, so that part of the effect could be removed.
View 6 Replies View RelatedCould anyone tell me how to flatten / straighten an image.
I have tried using the perspective crop tool but it only works on rectangular images.
I've been printing my images and even with a calibrated monitor they come out darker than what's on my monitor. I'm using the proper printer and paper profiles and got to wondering if my problem might be that I'm printing the psd. In essence, before saving it I just print the image once I've made adjustments to layers, etc.
View 1 Replies View RelatedHow would you remove traces of a shadow in an image?
e.g. Let's say I have an image of a sheet of metal with a hole in it. Obviously, in a 2d image, it looks like a hole because part of edges of the metal will be shadowed where the hole is. But how would you edit the image to remove those shadows?
The reason I would need to remove those shadows is because I am importing the image into a game engine, and the bump map will be handling the shadow effects.
I am trying to flatten an image in Photoshop while keeping my transparent background. When I flatten, it gives me this white background instead.
I've seemed to of figured it out. what I did was>merge all visible layers(except for the background layer),>command and click on the layer to select all>flatten image>command j>deselect> and then delete the flatten layer. this gave me the transparent background I was looking for."
I'm using a Windows 7 icore7 machine. The file I'm working on is composed of six layers: 1) a masked Levels layer; 2) a masked Noise layer; 3) a masked Hipass layer; 4) a convert to BW layer; 5) a copy of the background layer; 6) the background layer. All the eyes on the layers are ON.
When I Flatten Image the contrasty look I've created with the Levels adjustment layer AND with the Hipass layer disappears and the flattened image no longer exhibits those qualities - in other words it reverts back to being soft, low contrast.
All the eyes are ON.
I tried various combinations of MERGE VISIBLE and the same thing happens.I swapped Hipass for Unsharp Mask and for Smart Sharpen and even more weirdness happens - These filters have no effect at all.
whats the difference between these 2,flatten image and merge visible, and is it necessary to do this before saving it to a jpeg or something?
View 2 Replies View Relatedhow can i flatten this image and invert its color?
View 1 Replies View Relatedhow can I change the resolution on a flatten image the looks pixeld?
View 16 Replies View RelatedCan anybody tell me the difference between Merge Visible and Flatten Image?
View 1 Replies View Relatedi put copyright text on my photos, i didn't flatten image but " save as" in JPEG,click "save" then before i close the photos , it said "save changes to the adobe photoshop document ...before closing?" then i clicked NO.
And now i opened these photos to change the size of the copyright text and year, i can't because there's no layer for the text, only a background which means the text and photo are in one layer. What should i do? or did i make a mistake somewhere?
I'm writing a simple 5 step Action. I keep getting this: The command "Flatten Image" is not currently available. Then it asks me if I want to Continue.doesn't do it each and every time.I'll load two images and it will do that on the first but not the second.
View 4 Replies View RelatedI have taken this image under poor lighting in a restaurant, and need to know how to best retore the colours in this lifeless image.
Yes, I know it ain't the greatest image - all I am hoping to do is remove the colour cast and get some of the natural colors in there.
I've tried tweaking it through "Selective colour", but this only seems to get me so far.
I need to rectify or flatten images of the wall of a drill hole taken at 60 degrees and 47 degrees from the horizontal? I need to analyze the distribution of sulfate veins in the walls of the drill hole made by the curiosity rover on Mars.
View 2 Replies View RelatedBeen working on my bands logo that has 2 layers on it. One has layer effects on it (inner and outer glow). When I flatten the image, it changed the way that it looked. Found out that it just "looks" like it changes because my canvas wasn't at 100%. I have to zoom out to about 25% to be able to see the whole image and work on it.
Is there any way to accurately see my whole image on the canvas and what the layer effects will actually look like? The way it works now, how the image will change once I flatten it. Being zoomed out makes what I'm actually viewing on the screen to be wrong it seems.
I attached 2 images, (Both are at 25%) the first one is what I'm looking at on screen BEFORE I flatten the image. This is what I want my actual image to look like. The second is AFTER I flatten the image. Notice the inner/outer glow gets smaller. I tried to just increase the size of the glows to compensate once I flatten it since I noticed that they were basically just shrinking. This doesn't really work though and I lose the noise effect on the white outer glow.
How am I supposed to work on the image and see what it looks like as a whole if zooming out doesn't show what the image will ACTUALLY look like?
Today for the first time I have encountered something strange when pulling a PSD file through from CS2 into imageready. The colours in the image seem 'washed out' and faded as per the file attached. I have also attached a file how it should look. I have obviously done something inadvertently to make it go wrong but I can't for the life of me work out what .
View 2 Replies View RelatedAre 'Flatten Image' and 'Merge down' same ? If not, what is the difference and significance of those two operations?
View 2 Replies View RelatedI have a number of photo images which I need to convert to 6 specific colours and pixelate the image and then sit on a grid (like if you were to make an image using a Rubicks cube to define colour and the grided system).
How would I do this? The grid needs to be 450 x 450 grid cubes (not pixels as I need to show the grid also). Like I say imagine you are using the rubiks cubes to make an image.
I flatten an Image, All the colors change to grayscale. Like if you look at the color chart, you see all the normal colors, but if you try to use a color it just comes out different shades of gray. Its horrible, and it happens everytime.
View 2 Replies View RelatedI opened a jpg that need more width of any color on each side. Set background to black and changed canvas to new width. However the original center image remains selected and Select>None is grayed out, so I can't flatten and save as new jpg. Merge Down command also grayed out. Looked through online docs but didn't find what step I'm missing?
View 9 Replies View RelatedI am trying to take the black and white image and flatten it so it looks flush with the bottom layer, how is this done? Image is attached.
View 2 Replies View RelatedI scanned a picture into photoshop at a resolution of 300. When i print it back out the colours are off and the image is kinda faded/pixely.
View 1 Replies View RelatedWhat's the difference between merge layer and flatten image?Especially in terms of saving the image. I understend that flatten image simply takes things down to one layer but what is partucularly different about merge?
The other thing is is it possible to distort just a portion of an image rather than the whole thing. Say for example to lengthen someones neck only? The only way I've found is to cut a selection then move things around leaving a gap that has to be filled using clone etc. Is there some way of stretching and compressing just portions of the image?
I am teaching myself Illustrator CS6 and have just created a complex image on one layer (contains about 145 different elements).
I now want to simplifuy the image so that I can use the 'knife tool' to cut and move a segment of the image (imagine an expanded pie chart).
I know how to convert the image so that instead of just one layer with multiple paths... I can have every element on its own seperate layer... but I can't find a way of flattening the layers in to one simple image.
In my Autodesk Inventor 2012 product design suit there is nothing displayed when I Press
Tools menu
Appliction Options
Colours Tab
I use gimp to make layered stencils for spray painting...I reduce it to a couple of colours, seperate the colours into different layers and then cut them out...
When I do im left with a ghost type image where the original layer was..
example: [URL]...
Is there any way of avoiding this?