I've been printing my images and even with a calibrated monitor they come out darker than what's on my monitor. I'm using the proper printer and paper profiles and got to wondering if my problem might be that I'm printing the psd. In essence, before saving it I just print the image once I've made adjustments to layers, etc.
View 1 Repliesi'm doing a layout in ps and there are some images, do i have to flatten it before printing and what is the best extension file name to have a quality print??? (psd.tiff.jpg)
View 2 Replies View RelatedHow do I flatten a drop shadow when I print?
View 12 Replies View Relatedwhy do some of the changes appear to revert when i flatten an image in cc
View 2 Replies View RelatedI'm trying to flatten an image with a gradient. This was originally a RAW image. My photos keep having this "C" with circles around it (as seen in Photo 2).
View 1 Replies View RelatedI've been using Ps for a while, but i don't really know an efficient way to flatten just 1 layer. 1 way is to put the layer by itself, but this takes time. Is there another way to do this? The effect would be changing an effect (fx tabs, strokes etc) into part of the image, so that part of the effect could be removed.
View 6 Replies View RelatedCould anyone tell me how to flatten / straighten an image.
I have tried using the perspective crop tool but it only works on rectangular images.
How would you remove traces of a shadow in an image?
e.g. Let's say I have an image of a sheet of metal with a hole in it. Obviously, in a 2d image, it looks like a hole because part of edges of the metal will be shadowed where the hole is. But how would you edit the image to remove those shadows?
The reason I would need to remove those shadows is because I am importing the image into a game engine, and the bump map will be handling the shadow effects.
I am trying to flatten an image in Photoshop while keeping my transparent background. When I flatten, it gives me this white background instead.
I've seemed to of figured it out. what I did was>merge all visible layers(except for the background layer),>command and click on the layer to select all>flatten image>command j>deselect> and then delete the flatten layer. this gave me the transparent background I was looking for."
I'm using a Windows 7 icore7 machine. The file I'm working on is composed of six layers: 1) a masked Levels layer; 2) a masked Noise layer; 3) a masked Hipass layer; 4) a convert to BW layer; 5) a copy of the background layer; 6) the background layer. All the eyes on the layers are ON.
When I Flatten Image the contrasty look I've created with the Levels adjustment layer AND with the Hipass layer disappears and the flattened image no longer exhibits those qualities - in other words it reverts back to being soft, low contrast.
All the eyes are ON.
I tried various combinations of MERGE VISIBLE and the same thing happens.I swapped Hipass for Unsharp Mask and for Smart Sharpen and even more weirdness happens - These filters have no effect at all.
Say you have a flattened image, a solid background and text of a differrent colour.
If you wanted to change the colour of the text is there some trick to simultaneously changing the pixels around the letters with slightly different hues (because of the antialiasing) into a relative colour?
i have attached a gif image of a letter zoomed in to give an example.
If you wanted to alter that text to say red could you do it?
whats the difference between these 2,flatten image and merge visible, and is it necessary to do this before saving it to a jpeg or something?
View 2 Replies View Relatedhow can i flatten this image and invert its color?
View 1 Replies View Relatedhow can I change the resolution on a flatten image the looks pixeld?
View 16 Replies View RelatedCan anybody tell me the difference between Merge Visible and Flatten Image?
View 1 Replies View Relatedi put copyright text on my photos, i didn't flatten image but " save as" in JPEG,click "save" then before i close the photos , it said "save changes to the adobe photoshop document ...before closing?" then i clicked NO.
And now i opened these photos to change the size of the copyright text and year, i can't because there's no layer for the text, only a background which means the text and photo are in one layer. What should i do? or did i make a mistake somewhere?
I'm writing a simple 5 step Action. I keep getting this: The command "Flatten Image" is not currently available. Then it asks me if I want to Continue.doesn't do it each and every time.I'll load two images and it will do that on the first but not the second.
View 4 Replies View RelatedI need to rectify or flatten images of the wall of a drill hole taken at 60 degrees and 47 degrees from the horizontal? I need to analyze the distribution of sulfate veins in the walls of the drill hole made by the curiosity rover on Mars.
View 2 Replies View RelatedBeen working on my bands logo that has 2 layers on it. One has layer effects on it (inner and outer glow). When I flatten the image, it changed the way that it looked. Found out that it just "looks" like it changes because my canvas wasn't at 100%. I have to zoom out to about 25% to be able to see the whole image and work on it.
Is there any way to accurately see my whole image on the canvas and what the layer effects will actually look like? The way it works now, how the image will change once I flatten it. Being zoomed out makes what I'm actually viewing on the screen to be wrong it seems.
I attached 2 images, (Both are at 25%) the first one is what I'm looking at on screen BEFORE I flatten the image. This is what I want my actual image to look like. The second is AFTER I flatten the image. Notice the inner/outer glow gets smaller. I tried to just increase the size of the glows to compensate once I flatten it since I noticed that they were basically just shrinking. This doesn't really work though and I lose the noise effect on the white outer glow.
How am I supposed to work on the image and see what it looks like as a whole if zooming out doesn't show what the image will ACTUALLY look like?
Are 'Flatten Image' and 'Merge down' same ? If not, what is the difference and significance of those two operations?
View 2 Replies View RelatedI opened a jpg that need more width of any color on each side. Set background to black and changed canvas to new width. However the original center image remains selected and Select>None is grayed out, so I can't flatten and save as new jpg. Merge Down command also grayed out. Looked through online docs but didn't find what step I'm missing?
View 9 Replies View RelatedI am trying to take the black and white image and flatten it so it looks flush with the bottom layer, how is this done? Image is attached.
View 2 Replies View RelatedWhat's the difference between merge layer and flatten image?Especially in terms of saving the image. I understend that flatten image simply takes things down to one layer but what is partucularly different about merge?
The other thing is is it possible to distort just a portion of an image rather than the whole thing. Say for example to lengthen someones neck only? The only way I've found is to cut a selection then move things around leaving a gap that has to be filled using clone etc. Is there some way of stretching and compressing just portions of the image?
I am teaching myself Illustrator CS6 and have just created a complex image on one layer (contains about 145 different elements).
I now want to simplifuy the image so that I can use the 'knife tool' to cut and move a segment of the image (imagine an expanded pie chart).
I know how to convert the image so that instead of just one layer with multiple paths... I can have every element on its own seperate layer... but I can't find a way of flattening the layers in to one simple image.
BenPruess-pyramid-egyptian-art.jpg
it's possible to crop one side of a 3D image & "FLATTEN" it with Corel Draw ?
Eg: The attached image shows a 3D Pyramid. Is it possible to crop out the side (with drawings) & "FLATTEN" it ?
So that i can simply print it out to serve as a template design.
As a very long time user of Paint Shop (back to the early JASC days) and using the program primarily for producing bmp and jpg files with lots of graphics, an irritation in later versions has been the need to 'flatten' the layers periodically while working on an image. In past versions (don't remember how far past) one could set defaults such that you automatically worked in a single layer. I don't specifically remember how this was done (only that it could be done) and have not 'rediscovered' how to do it in my current X3 version and assume it will be the same in my (on order) X4. Is there a way to default into single layer work?
BTW: I strongly second the dislike of the graphite color scheme so certainly hope X4 gets 'fixed' to allow one to get rid of it.
I also note that after using the pop-up that appeared in X3 startup to order X4, my X3 became inoperable and had to reload it!
I am having an issue with Gimp after taking a heart shaped transparent bg image and filling the transparent parts with a flame pattern, and adding new image objects as layers, every time I flatten the image or export the image to jpg, there is a noticeable white border around the heart! I DON'T want that!!! how can I export or flatten the image without?
View 3 Replies View RelatedRunning a script to open up files and convert to another type. When it gets to a TIFF type file a dialog window titled 'TIFF Import Options' is opening. This windows has an Options column that contains two radio selections for 'Convert Layers to Objects' and 'Flatten Layers to a Single Image'. How would I open the file with the 'flatten layers to a single image' set?
View 1 Replies View RelatedI am learning about CS2 now.
Is it best to flatten my images once I get them completed or is it better to keep them in psd format with the layers intact. What are the pros and cons (other than file size of course).
do you flatten your layers when finished? PSD files are huge and flattening seems to compress the size.
Also, if you do flatten, can you open them up again to make further adjustments?
I have a strange issue with my Epson R3880 printer: when I make up a composite image in Photoshop CS5 12.0.4 by cutting and pasting from various other images (then flattening the layers), I cannot get it to print although the printer goes through the motions, but nothing appears on the paper; also the print head doesn't attempt to print over that part of the paper where the image should be appearing (I'm actually doing proofing).
I've reinstalled Photoshop and the latest printer drivers, and tried to print it in other applications (Photoshop Elements and Gimp). Any other images (ie non-cut and paste) print satisfactorily. I did speak to someone on the Epson help desk who told me he thought it was a Photoshop problem, but the fact that the image won't print in Gimp suggests this may not be the case. The only thing I can think is that something in CS5 which created the image causes an allergic reaction in the printer! I'm running Vista x64.