Today for the first time I have encountered something strange when pulling a PSD file through from CS2 into imageready. The colours in the image seem 'washed out' and faded as per the file attached. I have also attached a file how it should look. I have obviously done something inadvertently to make it go wrong but I can't for the life of me work out what .
View 2 RepliesI have several animated gifs that I would like to edit (basically add another frame) to. Am I able to do this? I can't seem to find a place on the toolbar where it would allow me to bring in an image (gif) from outside the project. I've even tried to drag it in from the desktop but ImageReady won't allow it in...
View 1 Replies View Relatedwhat can i do with that image so it fades into the red background without looking stupid? and what would you recommend i do to make it look better overall?
View 2 Replies View RelatedI have two images. I want to fade one out over the other. How do I do this?
View 3 Replies View RelatedI created this a while back and only have the jpg. How did I do it, with the scratches?
View 1 Replies View RelatedI have taken this image under poor lighting in a restaurant, and need to know how to best retore the colours in this lifeless image.
Yes, I know it ain't the greatest image - all I am hoping to do is remove the colour cast and get some of the natural colors in there.
I've tried tweaking it through "Selective colour", but this only seems to get me so far.
I have seen it on many sites where i image starts off full colour and gradualy fades into nothing i like the effect and i no how to fade a image using the opacity and fill.
View 3 Replies View RelatedI've got the hang of doing animations in photoshop (keeping several images visible for a few seconds each) ... but I don't know how to fade from one image into the next. I've tried overlapping the timeline segments, but that doesn't work.
View 1 Replies View RelatedI have an ad layout I am working on for a horse owner. I have removed the horse from the background and would like to have it so that his image fades from top to bottom. I know I saw something on how to do a fadeout on an image, but I cannot find it. Any suggestions would be treated with GREAT appreciation!! Also, can this be done as a diagonal fade also???
View 3 Replies View RelatedI'm trying to create a header for a website, 500x100, that has a photo image, 300x100, in the center that has both right and left edges feathered. On the left edge it would fade to white, on the right edge it would fade to blue. Seems like I've seen similar things on other sites.
First I thought I'd just place a blue rectangle on the right half of the piece and place the image over it in the center with both edges feathered. But if I feather one edge (with the gradient tool), trying to feather the other edge undoes the first edge's feathering. I still don't really get working with layers.
Then I thought I'd just feather the left edge of the image and place a blue rectangle with a feathered left edge over the right edge of the image. But when I draw a rectangle, the gradient tool doesn't work and I can't feather the edge. If I select the tool and click in the rectangle I get a message that the content of the layer isn't directly editable and I can't figure out how to make it editable.
At this point, I'm not even sure what method I should be using to accomplish this task. Should I be feathering one edge and blurring the other? I think I did get it done once before by starting with an image that had lots of extra height, feathering all 4 edges and cropping off the top and bottom feathered parts but this image doesn't have that much extra to work with.
I'm sure these are stupid questions but the tutorials, tips and how-to's I've looked at always seem talk about how to feather one or all edges, not two. It doesn't help that I'm still not really familiar with all the tools and terminology.
I would certainly appreciate at least a pointer to what methods I should be using. I feel like I'm trying to use a chisel as a screwdriver.
Say you have a flattened image, a solid background and text of a differrent colour.
If you wanted to change the colour of the text is there some trick to simultaneously changing the pixels around the letters with slightly different hues (because of the antialiasing) into a relative colour?
i have attached a gif image of a letter zoomed in to give an example.
If you wanted to alter that text to say red could you do it?
I am using CS5 Photoshop on a Mac OS X version 10.7.5 computer. I have recently re-opened a couple documents that I created a couple months ago, and found one layer on each doc was practically invisible. Odd that it is the same black and white key line drawing layer that is affected on each file; all other layers remain in tact.
I checked the opacity, layer eyeball, and all the settings and nothing makes a difference. In addition, I have turned off all other layers to make sure nothing is blocking it from view and it remains faded. I have duplicated the layer several times to make the image appear stronger; however, It barely makes a dent. It's as if the layer has slowly begun to evaporate!
Notice on the left side, the edge is faded to give a 3-D look and on the right side of the artwork itself (ignore the red HD DVD case), it is rounded.
For example I already have the following, and I want to make it look similar to above. I just don't know how to round the corners on one side and give the left edge that faded look.
I'm desiging a banner for a website and a big concern of mine is that the sidebar should fade into the black default background of the website.
It's a single layer, the image is 32 x 346 pixels and I'd like to know how to blend the bottom quarter or so of the multicolor sidebar to the default black.
I have a number of photo images which I need to convert to 6 specific colours and pixelate the image and then sit on a grid (like if you were to make an image using a Rubicks cube to define colour and the grided system).
How would I do this? The grid needs to be 450 x 450 grid cubes (not pixels as I need to show the grid also). Like I say imagine you are using the rubiks cubes to make an image.
I flatten an Image, All the colors change to grayscale. Like if you look at the color chart, you see all the normal colors, but if you try to use a color it just comes out different shades of gray. Its horrible, and it happens everytime.
View 2 Replies View RelatedI am having a little trouble trying to add multiple fade to transparent gradients appear in a single image. Here are the steps I have done so far:
Create a new vector with the photo unlocked
Add a layer mask
use the black to white gradient, so the edge of the photo is completely translarent and as you move to the center, it slowly reveals the photo.
I used this technique I found online for one edge of the photo and it worked great, untill I tried the second gradient on the same photo, and the first one I did disappeared. I guess Photoshop only lets you have one.
The next thing I tried is to create another vector mask and create another gradient, but it did not work at all. Also, Photoshop only lets you have two vector masks per layer, so That wont do me much good if I need 4 gradients, each one fading to transparent around the 4 edges of the photo.
Any solution would be greatly appreciated. I plan to take the photo that has the fade to transparent gradients and copy it to another background image with some text.
Thanks a lot in advance,
Jake
1. i want to make the bottom of an image fade to black gradually. like a spotlight all around it.
2. i want to know how to make a gradiented grey backround, starting black. ending gray.
I have Photoshop CS and I want to know how to make an image selection fade to transparency.
Example, I select part of a photo, say a persons face, with the lasso select tool.
I want to make the boundries of the lasso selected area fade to transparent in a gradient style.
In Elements 7, how do I fade the image so that I can place text over.?
View 4 Replies View RelatedI scanned a picture into photoshop at a resolution of 300. When i print it back out the colours are off and the image is kinda faded/pixely.
View 1 Replies View Related In my Autodesk Inventor 2012 product design suit there is nothing displayed when I Press
Tools menu
Appliction Options
Colours Tab
I am using Elements 6.0. I want to fade my image to white on the right side of the image. That way I can add text there in the plain white space. I've seen several ways to do this, but none seem to work on 6.0. using 6.0 . I tried a few ways explained on higher versions but I can get it to work.
View 2 Replies View RelatedI use gimp to make layered stencils for spray painting...I reduce it to a couple of colours, seperate the colours into different layers and then cut them out...
When I do im left with a ghost type image where the original layer was..
example: [URL]...
Is there any way of avoiding this?
can simple fade into slow motion or fade out of the effect ?
View 5 Replies View RelatedI want to know how to fade something out. Like how the gradient tool works, but instead of a color, I just want it to be from background to transparent.
Lets say I have a line as my image, and that's all that's there. The background is transparent (no white background, in the program it's displayed as a white/gray grid of small blocks)
___________________
Theres my line. It's nice but I want the ends to smoothly fade out into the transparency. Like this
....,,,,________________,,,,....
I know that's a bad example, but where the line is full and thick is where it is just that. Full, thick, it's the line! But then the comma's, say thats where it starts to fade, by the end of the comma's, the line is 50% transparent. By time it hits the periods its faded by a lot, and goes from 50% transparent, to completely transparent.
I hope you understand what I'm talking about. And for actual use, I wont be fading a straight line. More a a curved design that I've cropped and want to have fade out on the ends.
I am new to gimp and am trying to work out how to fade out an image diagonally.
I have managed to fade and image from left to right using a masked layer and the gradient tool but am struggling to fade diagonally.
I've just used image trace to get a three colour vector of a photograph. I want to replace the three colours in the image with colours from my brand's style guide. At the moment, they're thre shades of a kind of muddy brown.
How I do this? The three colours in the image aren't showing in the swatch menu and I don't really know what I'm doing.
For a project, I've imported a jpeg file that I made on Photoshop. The colors look perfectly fine on the RAM previews and stuff but after I render it, just that specific jpg image comes washed out. It should be dark grey / almost black but after rendering into .mov that image becomes medium grey. It's noticeably more washed out and lighter. All the other colors in that image are also noticeably lighter as well.
I have set my working space to my monitors color profile and I have proofed the colors after saving on Photoshop.
I work with X3 at home and I wonder how I can do this. I have a image and What I try to achieve is that it fades out to white from the left to the rigth side. So on the left side the image is fully seen and on the right seen it turns into white.
View 2 Replies View RelatedI've been using GIMP for a while for basic website stuff. Very basic website stuff. I've recently been asked if GIMP has some more advanced features. Well, advanced put to my usual level of use anyway.
So, I thought I'd query if I could do the following in GIMP...
(1) Edit a BMP but ensure the file size remains the same?
The person asking is using the images for a specific purpose and they always have to be the same size.
(2) Open .pspimages and possibly save back as this format.
The answer to this seems to be no on the opening front anyway.
(3) Restrict the image to a very limited range of colours, say 3-6?
Again this is due to the very specific and restricted nature of the images they are creating.