Xara :: Altering Logo Font And Colours
Jan 31, 2012
I am building a site for a client, and as such they employed the services of a graphic designer to design a company logo. Well the client has chosen one of the logos but the colors do not fit in as well with the sit layout as one would desire. I approached the graphic designer to request changes for the client, but they sent me the files and said I can modify them in Photoshop.
The trouble is, I don't use PS. How to make the appropriate changes using Xara? I did try to highlight the text but I think it may all be part of an object with the razor. I wanted to convert the larger text to white and export everything from a dark background so it doesn't have the white jagged edge you would see from a white background.
I just tried to upload the ps but it is 800kb..
Link is [URL]......
View 9 Replies
ADVERTISEMENT
Dec 30, 2005
Say you have a flattened image, a solid background and text of a differrent colour.
If you wanted to change the colour of the text is there some trick to simultaneously changing the pixels around the letters with slightly different hues (because of the antialiasing) into a relative colour?
i have attached a gif image of a letter zoomed in to give an example.
If you wanted to alter that text to say red could you do it?
View 2 Replies
View Related
Oct 6, 2012
how to create and save a new font set by altering an existing one. I want to reduce the stroke of the characters while maintaining the spacing between the original characters For instance, in the case of the letter "O," an equal amount would be trimmed from the outer line and the inner line. I want to save the new font so that, in the context of vinyl graphics, can centrally overlay the new font on top of the old.
View 7 Replies
View Related
Mar 30, 2004
I have an logo that has a brown background and a white foreground. How do I swap around the colours so that the background becomes white and the foreground becomes brown? Also is it possible to replace one colour with another colour. I am currently using Photoshop 6.
View 1 Replies
View Related
May 30, 2012
I had posted in another thread about wanting to clean up a signature and make it look more font like. I tried that and it seemed to be pretty difficult due to the amount of random in a hand written signature.
So I think I'd like to approach this from the other direction. I have a font I like but I don't want it to look like the font (way too common). Is there a way to alter the font (not the entire font set or even to create a new font but just for a one word Logo)?
I'd ideally like to connect two of the letters and also modify the shapes of the letters just a bit.
View 4 Replies
View Related
Jan 12, 2007
how to make two colours into one font?
View 1 Replies
View Related
Oct 4, 2011
importing photos into Xara 7 - the photos have a "green" sheen to them - I've only noticed as I've been using xara to print out some photos for a friend who's printer died. he uses powerpoint to print his and the difference between the two is really marked! i'm assuming it's due to CMYK/RGB differences (ppt is RGB) but I can't for the life me see where I can alter the Xara settings so the photos come in as per ppt.
View 8 Replies
View Related
Nov 27, 2012
I've got a need to import a couple of colours OR add a couple of colours to the permanent colour.
I am using MX Photo&Grphic Designer and WebDesigner. I use webDesigner to create and administer a business website and use MX2013 for my graphics (Business graphics that use a pallet of company colours). Everytime I open a new document (tab) in MX2013 I need to recreate my company colours and name them. This is also the same in WebDesigner.
Is there anyway to add colours to the permanent colour pallet so they are available for every document as a default? This small item would save me some time and the frustration of constantly needing to add the same colours to my pages over and over.
View 7 Replies
View Related
Jun 30, 2013
When I import some PDF-files to XDPX (8) (Windows XP SP 3) it shows with CMYK colours. That means that I can't use the material as all colours are "wrong".
Is there a way of importing PDF-files so that they show with RGB colours?
Could that be an option in forthcoming versions; that you can select to import either as CMYK or RGB?
View 9 Replies
View Related
Sep 5, 2011
I'd like to replace all occurrences of font A with font B in my Xara document. Can this be done is a more efficient manner than by hand?
View 3 Replies
View Related
Aug 20, 2013
what font used in the logo on the website
[URL].....
View 2 Replies
View Related
May 3, 2009
Im trying to design a logo. Im using a font called fontvission, and I down loaded it from a site that has free font downloads.
When I use the font in PS cs2 its lines dont look clear, there some what pixal looking. I was wondering if any one new how to make the lines crisp. I have it set on 1000-800 pixals, 120pt font.
View 2 Replies
View Related
Oct 1, 2004
Well I made a logo for my website and I actually like it but the font used for "Inovative-Scripts" doesn't really fit with the rest of the website.
It's a little PHP Company website (u know just for pocketmoney) together with a friend so it has to be kinda serious...the font is too comic like...
Does anyone have an Idea what font I could use...I've been lookin around for ages and I havn't found anythin that looks ok. I found this image on another website and I like the font...but I don't the name of the font.
View 4 Replies
View Related
Feb 14, 2006
I'm goin to design an new logo for my team an was wondering how i can make a logo like this one:
i guess that there's no particular font for this. (especially the fat line under the text).
View 3 Replies
View Related
Feb 16, 2006
to recreate a logo. or maybe they used some font that i don't know.
the lack of quality for the picture.
View 3 Replies
View Related
Nov 27, 2005
I downloaded the trial of Illustrator but can't figure out the that process either.
Here's my problem: There is this font, Alberto Heavy Hollow, and I want to put it into Photoshop, alter it a bit, and then simply give the new font a black outline and 1 color fill. After that, I can include the colored name in my logo design.
I have tried converting it to paths, outline stroke, then sometimes when I want to do something to the font, under the "Object" selection, the thing I want to do is not activated in bold type.
View 2 Replies
View Related
Aug 20, 2006
The Logo below uses a font that is only 2px thick. This one has 2 x 2px lines, how was this done? How was the second 2px line added? Illustrator or PS?
View 5 Replies
View Related
May 18, 2011
Which is the official font of the 3ds max text logo?
View 2 Replies
View Related
Nov 7, 2009
I am trying to replicate this logo but the P in POSITIVE that has been stretched and lengthened is giving me issues.
How I can do this in Xara X -
View 9 Replies
View Related
Mar 4, 2009
I've just taken two decals off my mountain bike, not realizing that the frame had a lacquer coating on top of them. In case you're wondering why I did one and was then stupid enough to repeat my mistake, its one on either side of the frame .
I'm now been left with a large mark were there is no lacquer on either side. I've asked around and found that it can't be neatly covered without a complete respray. I have, however, found a local company who can make custom decals to put over it if I provide them with a design. So I've obtained a copy of Photoshop CS3 and tried to make my name in a similar font to the large manufacturer decal (which is still on the frame). I'm trying to get Chris on one side and Walker on the other with the same dimensions.
View 1 Replies
View Related
Nov 12, 2013
I have a script font that i need to resize. Most all the font is 144pt one of the letters needs to be 96pt. When i move just this one letter down in size the stroke on that letter looks puny and noticeably smaller.
I need a good way of maintaining the stroke thickness and moving the height and wide down to 96pt.
View 1 Replies
View Related
Oct 12, 2011
If I create a logo in Xara Designer Pro 6.0, is that vector? Can I scale it up as large as I want?
View 3 Replies
View Related
Mar 21, 2006
I want to create a logo. The word I am creating is going to be Foxx. I want the backside of the F to have a fox's head coming out of it. I want the appearance of the Fox's had to be growing from the back side of the F. I am capable of pulling this off. I am more interested in the techniques that some of you would use to acheive this task.
1.What I would do is find a picture of a fox's face in this case a profile shot.
2.I'd then import that pic and extract the head from the fox (only in the picture PETA )
3.I'd then use my combination of the pen tool, shape tool, and direct selection tool to trace the fox's face.
4.Finally I'd design the F to match the fox's face.
I do not have Illustrator.
View 2 Replies
View Related
Mar 6, 2006
I am trying to make a logo button for my site, but unfortunately I have no idea what font to use for the logos. I have attached some examples and was hoping that I could get some help.
View 2 Replies
View Related
May 21, 2012
I am VERY new to Adobe Illustrator and I am trying to recreate my company logo so as to save it in a higher res file type.
See attached.
The font is Melanie BT Roman, but I cannot figure out how to create the shadow / outline effect.
View 3 Replies
View Related
Jan 16, 2011
I have created a logo for a client using Xara. I would like to be able to send then a transparent version of the file so that they can use the logo on different backgrounds. The problem is a white hairy edge surrounding each element of the logo.
I have tried saving to png, gif, and tiff but they all look the same.
View 3 Replies
View Related
Nov 19, 2012
I have inherited a site tempate, and am trying to change the logo to emulate the text already present on graphics on the site. The site is at [URL]. I have played with varying the shadow on the lefthand text image but it just can't emulate that on the right which was supplied with the site layout. I can't get the shadow to have the same soft blur as the text on the right.
View 8 Replies
View Related
Aug 16, 2013
In my Autodesk Inventor 2012 product design suit there is nothing displayed when I Press
Tools menu
Appliction Options
Colours Tab
View 2 Replies
View Related
Feb 7, 2014
I use gimp to make layered stencils for spray painting...I reduce it to a couple of colours, seperate the colours into different layers and then cut them out...
When I do im left with a ghost type image where the original layer was..
example: [URL]...
Is there any way of avoiding this?
View 2 Replies
View Related
Dec 22, 2013
I have all 3 weights of the free font Lavanderia installed on my computer. However, when I go to use this font in Xara Photo & Graphic Designer, it only shows one of the weight (Lavanderia Delicate). I can't find the other 2 fonts in the list anywhere. why the program is not displaying all the fonts in this family? I really need to get a project done quickly that requires one of the weights not displaying.
View 2 Replies
View Related
Jun 26, 2012
I have been working on a book cover for a client and was asked to modify a capital letter in the chosen font. The letter "S" had a curly q at the top that needed to be removed. I converted the letter to an editable shape and deleted the offending nodes. Along the way I had to break the points and then reconnect. When I broke the points, Xara split the shape into 2 layers for some reason so I could not rejoin the points later. I ended up combining the layers and was able to rejoin the nodes that way.
The problem I had was that when everything was reconnected, I could only color the outline, the shape would not fill. I ended up having to export as a PNG to Photoshop, created an adjustment layer and painted it in. Everything looks great BUT I would have preferred to just reconnect the nodes and fill the letter in Xara.
View 6 Replies
View Related
