Photoshop :: Printing Effects Techniques
Jul 20, 2012
Let's say you got a picture and you start editing it:
DesaturateAdd some noiseAdd some random dustAdd some vintage colorsSo you end up with a picture (let's say 1000x800px, 72dpi) that looks fine on your screen with 100% zoom. But you don't want to use this picture for a blog or something, you just want to print it. If you print it with 300dpi then most of the effects (noise, dust...) won't show on paper because the picture is printed around 25% of what you see on the screen.
Question:
Is there a technique so you can control whatever effects you add to your picture when the picture is going to be printed? I could resize the 72dpi picture after all effects applied around 400% and then print it but is resizing the best solution?
View 25 Replies
ADVERTISEMENT
Sep 24, 2008
I have read and understood the Photomerge tool (and tried the process with the sample images that are in CS2). All this seems to be fine except for a couple of things...
1. To achieve 180 degrees I am going to need more than 3 images right? (overlapping each image by 15%-40%).
a. Can Photomerge in CS2 work with more than 3 images, or is 3 the maximum??
If 3 is the maximum, then it wouldn't be difficult to just increase the canvas width and add on? Or not? Or do 2 sets of 3 then hand stitch those together? What is the best process for achieving 180??
Also, I like to shoot just before sunset,usually. If I did a 180, say with the sun setting in the right hand side of the image, then panned to the left snapping as I go, I am obviously going to get different gradients of blue in the sky, (lighter sky to the right, a darker sky to the left)
Should I shoot in Manual or Aperture?
How will I get the tones in the sky to be seemless?. As long as I overlap by 15% - 40% all should be good?
What is the best process for achieving equal exposure in all shots?
View 1 Replies
View Related
Apr 7, 2004
What are some ways that people like to create cow leather, like the type you might find on cowboy boots? I've been searching for a good way to make a leather-looking tent.
View 2 Replies
View Related
Apr 27, 2013
I am taking photos of parts for a client. I've got a pretty good method down with correcting the originals to achieve the results I need. First here is the original. I'm using different color temp light sources, the walls of the photo box are slightly gray, and the table the parts are sitting on are white. So i'm trying to achieve the most accurate camera settings to get the original below:
After doing levels and exposure correction in PSD, I get what I want. I played around with the channel mixer and color balance to see if I can properly correct the object so it looks like gray steel, and not having that slight yellow/green tint to it.
The only way I could figure it out is to just turn off the hue saturation and it gives it a somewhat decent result as seen below: But suppose my object is made of gold, or has a piece of plastic on it that's red; if so, then turning off the saturation will not work.how I can use other controls in PSD to achieve a more accurate result?
View 6 Replies
View Related
May 4, 2004
how I might go about applying an old style 3d stereoscopic effect onto an image? The effect doesn't have to actually function, is just required to give the effect of the kind of red and green cinema technique.
View 2 Replies
View Related
Apr 26, 2004
I am a 3d visualiser, who specialises in Architectural Visluals.
I was wondering if anyone knows of a plugin, or a way of realistically creating, the technique of a standard SLR filter, to a CGI image.
I have seen a couple of big companies who produce images that seem to have a distinct style, and it seems to be the colour levels either are too saturated or over colourfull, yet they are very good and a have a nice feel to the images.
I think they must use a lens filter type plugin, but i cant seem to find one on the net..
View 3 Replies
View Related
Jun 26, 2007
i wanna know which is the best technique to remove noise in Photoshop CS3
View 3 Replies
View Related
May 30, 2008
sometimes I will get a request for pool water to be placed in a pool and i need a way to do this more efficiently than I have been doing. Can some one help me with this. I have struggled with this lately on some pictures. I have added an example. I need to add pool water to this picture thats fairly realistic if possible.
View 8 Replies
View Related
May 26, 2004
With the incredible amount of talent that exists on this site, with the "carded" pros and the guys who have been around the block and have hit every curb, it seems to me that a new forum catagory could be opened. "Tips from the Pros" or some such.
I know the Advanced area exists, and is rarely visited, and is good for those already 'advanced', but maybe something up front in the forum would help the average guy or gal. I've been doing digArt for about ten years or so, and there is not a day goes by, where I don't pick up something from someone else, new to the medium or not.
View 1 Replies
View Related
Jan 20, 2005
What is a good method to employ when using PS to draw facial features of an animal in this case. To be more clear, I know how to go about drawing the subject but would like some advice from those with experience on how to best draw out a figure in PS, such as techniques for getting curved lines that are not jagged, etc. Have found that the brush tool works well compared with the pencil tool, but I don't have much time in drawing out things in PS and would likle to hear what your techniques are basically for getting a nice looking drawing.
View 7 Replies
View Related
Sep 12, 2012
Shot by a phone camera. I think the child who clicked couldn't focus & couldn't keep still...Not an easy job to fix this,at least i can't.
View 8 Replies
View Related
Nov 13, 2013
I wonder to know if there are new complex techniques to convert an image in black and white . would you like to share some experiences and knowledge about it. i don't mean the beginning like start with a gradient or a channel mixer but steps after.
View 3 Replies
View Related
Nov 3, 2006
I've done a bit of photo retouching on faces before: removing skin blemishes, changing eye colour, etc. I've only ever made subtle changes though; I saw a before and after of a photo retouch job on a model that went into a magazine (can't find the link now) and the difference was staggering! Does any one know of a tutorial or reference guide that takes you through the techniques? I know it's a huge topic but I know my way round Photoshop and I'm keen to know the techniques rather than a step-by-step guide.
View 5 Replies
View Related
Aug 4, 2010
What are some good tips/tricks for selecting multiple surfaces. I have a model that is composed of something like 1500 individual surfaces. I'd like to know if there is a way I can select only the "Top" surfaces, or edge surfaces (or alternatively if there is a way to select all surfaces that are visible from the Top view or side views). Something like selecting loops, and chaining when dealing with sketches would be useful.
What I'm trying to do is extract the upper most surfaces out of an imported collection of surfaces (its a cube-like shape, not organic or curves), and then use them to create a thickened solid. I don't want to spend the time making the 300 clicks necessary to get all the surfaces by holding <ctrl> (not to mention a wrong click without <ctrl> could send you back to square one).
View 6 Replies
View Related
Oct 31, 2011
I started my head model with a sphere ad I moved vertesis to shaped it, created lips and weld it onto the face, created two spheres that makes the eyes. I added a skin texture, the weldings of vertesis looks planar ang blocky thatn round and I cant seem to make it appear like a pro one. Its even hard to animate. I just wish I can overcome this, im stuck.
View 1 Replies
View Related
Nov 1, 2011
I'm starting to develop some customization for Inventor, and I need to decide whether to use VBA, .net, addin, plugin, or what else.According to this post .net is easier to use than VBA: URL....
I did a quick test and I found out that with VBA is much easier to use than .net: you can edit the source code while debugging, you don't need to compile and install anything, everything seems to work much smoother.Do I risk to find out that VBA has problems later in the development?
Where can I find documentation with comparison between the different customization techniques?
View 8 Replies
View Related
Apr 10, 2013
a look at 3d text integration techniques inside of action [URL]....
View 2 Replies
View Related
Feb 14, 2008
I am relatively new to Photoshop CS2 but I've used other apps before. My question is - if I have a photo with a figure dressed in black on a light background, what is the besttechnique to use if I want to cut the figure out and put her in a backgroun of another colour, maybe a darker colour?
There are 2 issues here:
(1) How to create a near-perfect mask around the figure? I tried using the magic wand, it's very very close but there are one or two places that I am not happy about, such as around the face where the colour value of the face is close to the colour value of the wall.
(2) Since she is on a light baclground to begin with, wearing a black jacket, I get a halo when I put her on a darker background. How can I mask out something like this, and be able to put the figure onto any colour background without the halo effect?
View 2 Replies
View Related
Oct 2, 2006
i have an image that is 28' wide by 60' high. i have to tile print it, but i have to print it out on film (see thru acetate). it has to be able to print at 1400 dpi. i know how to print at 1400 dpi on adobe photoshop, but i dont know how to tile print on that program. i have the image now in illusrtator, because it lets me tile, but i cant get it to print out for film (1400 dpi). im using a epson 1280 printer.
i really need to be able to tile print this in high resolution on film. anyone know what i can do??
View 1 Replies
View Related
Apr 9, 2013
I have PSE11 and purchased Paint the Moon effects. How can I view both the Layers panel and the Effects panel at the same time? Was this an option in older versions of PSE that are used in the Paint the Moon tutorials?
View 2 Replies
View Related
Sep 2, 2013
after editing an effect from the panel (such as adjusting the levels of a drop shadow), to add it to the effects panel?
View 2 Replies
View Related
Oct 30, 2012
How do I convert the colour profile of a Lightroom custom printing package from Adobe Prophoto to sRGB before printing? For that matter, how do I save the thing? I have no interest in saving the template, or the collection separately, since neither has any use without the other. And without saving them as one finished item, I have no way to convert the colour profile of that item. I can see clearly from the appearance of the print preview that the above mentioned colour profile conversion is required.
View 1 Replies
View Related
Sep 2, 2013
In PSP X5 I'm pretty sure there's a way to make User Defined Instant Effects in the Adjust mode, but I can't find the steps in the Help Files. I'm thinking these are just scripts, but I'm not sure.
View 1 Replies
View Related
Aug 7, 2013
I have a flash animation, just shapes and tweening. I was wondering if there's a way to convert it to After Effects but keeping it editable (i.e. getting AE shapes and keyframes).
View 1 Replies
View Related
Oct 17, 2013
I have created keyframes from audio file and used them to generate some effect, all works fine, it is amazing how easy it is However, I would like to generate flash (?) so that these effects would be dynamic to different audio files after export.
What I want is basically to create effects that can be used in life event to the streaming music.
View 4 Replies
View Related
Feb 21, 2013
After intalling Premiere pro CS6 and After effects CS6, I installed add-ons for these programs (newblue, boris, prodad...). When I open After Effects it gives me 38 cases of effects (Detail Enhancer, noise Reducer...) redundant in other programs, telling me to get rid of them.
When I check these effects in my programs, they are mainly .aex files, located in Premiere Pro CS6, Adobe Common Plug-ins, NewBlue Video effects collections 1 to 6. Some of them also exist in avid /pinnacle studio programs (my former video tools I still use to close previous video projects) before concentrating in Adobe CS6 suite. I don't know what to remove in a safe way. Premiere pro CS6 doesn't worry about redundancies ! Only After Effects...
View 1 Replies
View Related
Feb 16, 2014
Specifically the Boris Continuum plugins. I get this error:
Seems to happen for really no reason, even if I apply the effect and let the comp sit idle, it hapens after a minute or so.
Win 7x64, AE CS6 11.04, 16 gb of RAM GPU: GeForce GTX560ti
View 1 Replies
View Related
Aug 1, 2013
I have made a short film of 6 minutes (in 6 parts on after effects) I have added all the effects and the camera work on AE, but it needs a lot of editing here and there, which I find impossible to do on AE since you can't cut and join scenes like Premier pro. I need to import all these sequences onto premier pro for editing now. The problem is once I import the files, it imports in the right order in systematic folders etc, but it doesn't show any of the camera work or the special effects like gaussian blur etc. All my hard work has gone.
There must be a way you can import the after effects file on premier the way it looks on AE.
Another problem is I read some boards and it has been suggested to edit the clips first on premier and then add effects on AE but I read this really late and I've already composited the whole film on AE. I just need premier for cutting now.
P.S: I also thought about exporting the AE sequences as TGA files but there's ZERO space left in my internal hard disk for that, and it would take forever to export them all anyway. Any other kind of export would reduce the original quality which I dont want, and which I dont have space for anyway, so that option is out as well.
View 5 Replies
View Related
Jan 17, 2014
I'm getting the same error on a project. Originally created in CC/Mac, down converted to CS6/PC (I don't yet have the exact version release). The sequence is 10 layers deep, and throws this error if we try to preview. If 8 of the 10 layers are turned off, then the sequence will preview as normal. So, is this a bug and is there a CS 6 version release that fixes this, or am I looking to reallocate RAM?
View 5 Replies
View Related
Feb 27, 2014
I've made a fabulous Smoke Text effect that I then insert the .mov file into Final Cut Pro. The smoke effect I downloaded from the tutorial has a black background and therefore when rendered out, it's a basic white text against a black background. Once in FCP, I have to turn the file's opacity down in order for it to layer over a video file and not black out what I layer over it.
How can I make the file transparent? A simple toggle of the transparency grid isn't going to do it. I need to make or find a video of smoke that is transparent?
View 5 Replies
View Related
Oct 25, 2013
i want to know that how to make a hd title effect in the after effects ?
View 1 Replies
View Related
