Photoshop :: Question On Drawing Techniques In PS?
Jan 20, 2005
What is a good method to employ when using PS to draw facial features of an animal in this case. To be more clear, I know how to go about drawing the subject but would like some advice from those with experience on how to best draw out a figure in PS, such as techniques for getting curved lines that are not jagged, etc. Have found that the brush tool works well compared with the pencil tool, but I don't have much time in drawing out things in PS and would likle to hear what your techniques are basically for getting a nice looking drawing.
View 7 Replies
ADVERTISEMENT
Sep 24, 2008
I have read and understood the Photomerge tool (and tried the process with the sample images that are in CS2). All this seems to be fine except for a couple of things...
1. To achieve 180 degrees I am going to need more than 3 images right? (overlapping each image by 15%-40%).
a. Can Photomerge in CS2 work with more than 3 images, or is 3 the maximum??
If 3 is the maximum, then it wouldn't be difficult to just increase the canvas width and add on? Or not? Or do 2 sets of 3 then hand stitch those together? What is the best process for achieving 180??
Also, I like to shoot just before sunset,usually. If I did a 180, say with the sun setting in the right hand side of the image, then panned to the left snapping as I go, I am obviously going to get different gradients of blue in the sky, (lighter sky to the right, a darker sky to the left)
Should I shoot in Manual or Aperture?
How will I get the tones in the sky to be seemless?. As long as I overlap by 15% - 40% all should be good?
What is the best process for achieving equal exposure in all shots?
View 1 Replies
View Related
Apr 7, 2004
What are some ways that people like to create cow leather, like the type you might find on cowboy boots? I've been searching for a good way to make a leather-looking tent.
View 2 Replies
View Related
Apr 27, 2013
I am taking photos of parts for a client. I've got a pretty good method down with correcting the originals to achieve the results I need. First here is the original. I'm using different color temp light sources, the walls of the photo box are slightly gray, and the table the parts are sitting on are white. So i'm trying to achieve the most accurate camera settings to get the original below:
After doing levels and exposure correction in PSD, I get what I want. I played around with the channel mixer and color balance to see if I can properly correct the object so it looks like gray steel, and not having that slight yellow/green tint to it.
The only way I could figure it out is to just turn off the hue saturation and it gives it a somewhat decent result as seen below: But suppose my object is made of gold, or has a piece of plastic on it that's red; if so, then turning off the saturation will not work.how I can use other controls in PSD to achieve a more accurate result?
View 6 Replies
View Related
Jul 20, 2012
Let's say you got a picture and you start editing it:
DesaturateAdd some noiseAdd some random dustAdd some vintage colorsSo you end up with a picture (let's say 1000x800px, 72dpi) that looks fine on your screen with 100% zoom. But you don't want to use this picture for a blog or something, you just want to print it. If you print it with 300dpi then most of the effects (noise, dust...) won't show on paper because the picture is printed around 25% of what you see on the screen.
Question:
Is there a technique so you can control whatever effects you add to your picture when the picture is going to be printed? I could resize the 72dpi picture after all effects applied around 400% and then print it but is resizing the best solution?
View 25 Replies
View Related
May 4, 2004
how I might go about applying an old style 3d stereoscopic effect onto an image? The effect doesn't have to actually function, is just required to give the effect of the kind of red and green cinema technique.
View 2 Replies
View Related
Apr 26, 2004
I am a 3d visualiser, who specialises in Architectural Visluals.
I was wondering if anyone knows of a plugin, or a way of realistically creating, the technique of a standard SLR filter, to a CGI image.
I have seen a couple of big companies who produce images that seem to have a distinct style, and it seems to be the colour levels either are too saturated or over colourfull, yet they are very good and a have a nice feel to the images.
I think they must use a lens filter type plugin, but i cant seem to find one on the net..
View 3 Replies
View Related
Jun 26, 2007
i wanna know which is the best technique to remove noise in Photoshop CS3
View 3 Replies
View Related
May 30, 2008
sometimes I will get a request for pool water to be placed in a pool and i need a way to do this more efficiently than I have been doing. Can some one help me with this. I have struggled with this lately on some pictures. I have added an example. I need to add pool water to this picture thats fairly realistic if possible.
View 8 Replies
View Related
May 26, 2004
With the incredible amount of talent that exists on this site, with the "carded" pros and the guys who have been around the block and have hit every curb, it seems to me that a new forum catagory could be opened. "Tips from the Pros" or some such.
I know the Advanced area exists, and is rarely visited, and is good for those already 'advanced', but maybe something up front in the forum would help the average guy or gal. I've been doing digArt for about ten years or so, and there is not a day goes by, where I don't pick up something from someone else, new to the medium or not.
View 1 Replies
View Related
Sep 12, 2012
Shot by a phone camera. I think the child who clicked couldn't focus & couldn't keep still...Not an easy job to fix this,at least i can't.
View 8 Replies
View Related
Nov 13, 2013
I wonder to know if there are new complex techniques to convert an image in black and white . would you like to share some experiences and knowledge about it. i don't mean the beginning like start with a gradient or a channel mixer but steps after.
View 3 Replies
View Related
Nov 3, 2006
I've done a bit of photo retouching on faces before: removing skin blemishes, changing eye colour, etc. I've only ever made subtle changes though; I saw a before and after of a photo retouch job on a model that went into a magazine (can't find the link now) and the difference was staggering! Does any one know of a tutorial or reference guide that takes you through the techniques? I know it's a huge topic but I know my way round Photoshop and I'm keen to know the techniques rather than a step-by-step guide.
View 5 Replies
View Related
Aug 4, 2010
What are some good tips/tricks for selecting multiple surfaces. I have a model that is composed of something like 1500 individual surfaces. I'd like to know if there is a way I can select only the "Top" surfaces, or edge surfaces (or alternatively if there is a way to select all surfaces that are visible from the Top view or side views). Something like selecting loops, and chaining when dealing with sketches would be useful.
What I'm trying to do is extract the upper most surfaces out of an imported collection of surfaces (its a cube-like shape, not organic or curves), and then use them to create a thickened solid. I don't want to spend the time making the 300 clicks necessary to get all the surfaces by holding <ctrl> (not to mention a wrong click without <ctrl> could send you back to square one).
View 6 Replies
View Related
Oct 31, 2011
I started my head model with a sphere ad I moved vertesis to shaped it, created lips and weld it onto the face, created two spheres that makes the eyes. I added a skin texture, the weldings of vertesis looks planar ang blocky thatn round and I cant seem to make it appear like a pro one. Its even hard to animate. I just wish I can overcome this, im stuck.
View 1 Replies
View Related
Nov 1, 2011
I'm starting to develop some customization for Inventor, and I need to decide whether to use VBA, .net, addin, plugin, or what else.According to this post .net is easier to use than VBA: URL....
I did a quick test and I found out that with VBA is much easier to use than .net: you can edit the source code while debugging, you don't need to compile and install anything, everything seems to work much smoother.Do I risk to find out that VBA has problems later in the development?
Where can I find documentation with comparison between the different customization techniques?
View 8 Replies
View Related
Apr 10, 2013
a look at 3d text integration techniques inside of action [URL]....
View 2 Replies
View Related
Feb 14, 2008
I am relatively new to Photoshop CS2 but I've used other apps before. My question is - if I have a photo with a figure dressed in black on a light background, what is the besttechnique to use if I want to cut the figure out and put her in a backgroun of another colour, maybe a darker colour?
There are 2 issues here:
(1) How to create a near-perfect mask around the figure? I tried using the magic wand, it's very very close but there are one or two places that I am not happy about, such as around the face where the colour value of the face is close to the colour value of the wall.
(2) Since she is on a light baclground to begin with, wearing a black jacket, I get a halo when I put her on a darker background. How can I mask out something like this, and be able to put the figure onto any colour background without the halo effect?
View 2 Replies
View Related
Aug 3, 2012
I can not find those buttons. I am newbie in Photoshop!
View 3 Replies
View Related
Dec 10, 2013
Eventually after I copy and paste with the clipboard enough times within one drawing, the ability goes away and I can no longer copy and past one item from one drawing to a separate drawing. I need to use the clipboard function because that is the only way of getting an item from one drawing to another.
I have download a clear clipboard function but it doesn't work. Closing CAD and restarting does not reinstate the function.
View 5 Replies
View Related
Jul 26, 2013
I have created an iLogic panel which allows me to control my revision a lot easier and puts my entered data into the parameters of the sheet itself, is there a way to have this show up on the drawing itself for a template?
View 1 Replies
View Related
Oct 13, 2013
I am trying to put together a lisp routine for exporting a Civil3D drawing to basic autocad entities and convert it to a clients layer standards.
I don't want any user input, so I see two problems with the routine at the moment.
Step 2. SAVEAS - I want the drawing to be saved in the same directory as the current drawing, either called "CLIENT_export.dwg" or preferably "Export_{current drawing name}.dwg". If the dwg exists I want it either to overwrite or increment a suffix number.
Step 4. At the moment it askes the user for a selection, I want it to select "ALL"
;;;Purpose to convert a Civil3D drawing into CLIENT layer standards.
(defun c:client ()
(setq old-echo (getvar "CMDECHO"))
(setvar "cmdecho" 1)
[Code]...
I don't have any experience with LISP or any other programming. I have just been cobbling this together from bits and pieces I have found on the web.
View 3 Replies
View Related
Sep 11, 2012
My Autocad has started a new behavior. When (in Win7) I double-click on a drawing file in Windows Explorer, Autocad opens the drawing file and also starts a new drawing, all in the same session of Autocad. Is there some system variable or Windows variable that controls this?
View 1 Replies
View Related
Oct 31, 2011
When exiting a drawing by clicking on the small X in the upper right corner of the drawing, my program routinely "stops working". I get the error message that it has stopped working and it closes. No chance to save work in other drawings open at the time. I often have three or four drawings open so my only workaround is to go through each and save, then close the one I want to close, let the system crash and reopen the other drawings. It does not crash every time but several times a day.
View 6 Replies
View Related
Sep 14, 2011
The layer is on and the ground levels on the architectural drawing in model view show the number and the box surrounding them however in the drawing window be it in the numbers have dissapeared and we are left with only the boxes ?
View 3 Replies
View Related
Jun 21, 2013
Setting up a tabulated ipart drawing template. Which is better...one drawing file with a table or individual drawings for each tabulation? Also does one method work better than the other when introducing vault?
View 1 Replies
View Related
Mar 7, 2013
I want to insert another drawing layout tabs contents in current drawing.
It's easy for MODEL tab, but for LAYOUT tabs, I dont know how!?
I prepared a code for INSERTING MODEL tab in current drawing:
(defun INS_DWG (TAB path dwg P / blk)(setq blk (strcat ""*" path dwg """));(setq N (vla-get-count (vla-get-layouts)));;Number of LAYOUT TABS in dwg(if (or(= TAB 0) (= TAB nil))(command "INSERT" blk P 1 0)); TAB=0 or omitted ==>Insert MODEL;(if (= TAB 1));==>Insert the 1st LAYOUT in dwg file;(if (= TAB 2));==>Insert the 2nd LAYOUT in dwg file;and so on....);;;usage:;;(INS_DWG 0 "c:\test\" "test.dwg" '(0 0))
View 8 Replies
View Related
Sep 20, 2013
I've recently made a new drawing template with ilogic prompts for entering data for all fields within the template. It also sets view sizes etc. I have lots of master drawings, which are reused when sizes etc change for a contract, which i would like to transfer to this new template. Drawing Resource Transfer Wizard does not offer this function.
I could get all drawings in a folder copied to specific sheet size on the master template.As the template will probably be developed further in the future I'm very loathed to do this take manually.
View 6 Replies
View Related
Nov 28, 2012
Recently upgraded to Civil 3D 2013 and drawings opened up fine. Now today any drawing that opens shows the plan view as last saved but then after loading takes the drawing and shifts it into a 3d view similar to a crossection. Is there a setting somewhere that has been changed? I noticed after a windows 7 update was preformed.
View 7 Replies
View Related
Jul 25, 2012
I realize it may be a Civil3D question. When I change my drawing scale in the "Drawing Settings" dialog box to 1"=40', for example. The Annotative scale in the Properties Palette changes to 1"=40'_XREF.
View 2 Replies
View Related
May 9, 2013
I'm taking over the development of some Autodesk addins that are used to parse a drawing to bring back text from the drawing, namely title block and bill of materials information. I have another process that runs and reads the meta data for the drawing itself that gets run from Vault before checking in the drawing. I need to know if I can combine these two processes such that I can parse the drawing outside of AutoCad. Is this possible?
View 3 Replies
View Related
