Photoshop :: Buttons Drawing Behind And Drawing Inside Disappeared
Aug 3, 2012I can not find those buttons. I am newbie in Photoshop!
View 3 Replies
ADVERTISEMENT
AutoCad :: Drawing Disappeared After Saving It In Block Editor?
Apr 18, 2011I was working on my drawing, using blocks: open block editor, edit block, close editor by clicking cross of closing block editor, then autocad asks me if I want to save changes, I click yes. And one time I clicked the smaller cross, which closes the whole drawing, and intuitionally clicked to save it. So my whole drawing closed. And when I open it, Autocad asks me : "filename.dwg contains authoring elements. Open it in Block Etidor?" yes/no/cancel. If I press Yes, then my drawing opens in block edit mode, and when I click close block editor the whole drawing closes. If I press no, then my drawing opens in normal mode, and I have in it just lines of that block. All layers, titleblocks are there, but my drawing disappeared. Is there any chance to get it back? how? I can't attach this drawing, because it's to large, ~4,7 mb.
View 9 Replies View RelatedPhotoshop :: Cannot Select Paths / Buttons To Left Have Disappeared
Jul 23, 2013I can not select my paths in photoshop, the buttons to the left have disappeared.
View 1 Replies View RelatedAutoCAD 2013 :: Drawing 2D Shapes Inside Of 3D Object
Jun 8, 2012so im drawing a 3d object in an isometric view. it is a 3d extruded object. essentially it is an extruded decagonal tube. i have, at the bottom, a line marking the center of the decagon so i can snap to it, draw a decagon for the base, and extrude it. problem is, i go to draw the decagon (or anything, for that matter), and i cant snap to the inside of the solid. autocad will only let me select the face of the object. is this a setting i can uncheck, or do i have to change the way i am drawing this?
View 3 Replies View RelatedAutoCAD 2013 :: Drawing Of 8.5MB Appears On Preview And Opens With Nothing Inside
Dec 15, 2013A drawing of 8.5MB appears on the preview and opens with nothing inside,This is the second time I’m reporting this issue regarding dwg files that appears on the preview but open improperly.
part of the dwg file is shown through the preview window but when open, nothing is found inside.
[URL]
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD Civil 3D :: Block Symbols Stored Inside Drawing
Jan 9, 2014How do I delete the AutoCad block symbols that are stored inside my drawing?
Not blocks that have been created that you can see on your drawing it’s the blocks that the point styles use and are stored in the drawing.
AutoCad :: Drawing Show Up As Small Triangles With Exclamation Mark Inside?
Jun 27, 2012I am having an issue with an xref in one of my drawings. There are AEC_WALL objects in the xref file but in my drawing they show up as small triangles with an exclamation mark inside.
View 2 Replies View RelatedGIMP :: Filling Inside Of Line Drawing - Transparency Checkerboard Grid
May 31, 2011After filling the inside of a line drawing, (cartoon "shape"), I'm left with the checkerboard pattern that indicates transparency. I'd just like to get rid of that checkerboard pattern so I can view my drawing the way it really looks! Can this be done in GIMP?
View 6 Replies View RelatedAutoCAD 2010 :: No Longer Copy / Past One Item From One Drawing To Separate Drawing
Dec 10, 2013Eventually after I copy and paste with the clipboard enough times within one drawing, the ability goes away and I can no longer copy and past one item from one drawing to a separate drawing. I need to use the clipboard function because that is the only way of getting an item from one drawing to another.
I have download a clear clipboard function but it doesn't work. Closing CAD and restarting does not reinstate the function.
AutoCAD Inventor :: Showing Parameters Of Drawing Template On Actual Drawing
Jul 26, 2013I have created an iLogic panel which allows me to control my revision a lot easier and puts my entered data into the parameters of the sheet itself, is there a way to have this show up on the drawing itself for a template?
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Saveas Drawing With Default Drawing Name
Oct 13, 2013I am trying to put together a lisp routine for exporting a Civil3D drawing to basic autocad entities and convert it to a clients layer standards.
I don't want any user input, so I see two problems with the routine at the moment.
Step 2. SAVEAS - I want the drawing to be saved in the same directory as the current drawing, either called "CLIENT_export.dwg" or preferably "Export_{current drawing name}.dwg". If the dwg exists I want it either to overwrite or increment a suffix number.
Step 4. At the moment it askes the user for a selection, I want it to select "ALL"
;;;Purpose to convert a Civil3D drawing into CLIENT layer standards.
(defun c:client ()
(setq old-echo (getvar "CMDECHO"))
(setvar "cmdecho" 1)
[Code]...
I don't have any experience with LISP or any other programming. I have just been cobbling this together from bits and pieces I have found on the web.
AutoCAD 2010 :: Double Click Opens Drawing Plus Blank Drawing
Sep 11, 2012My Autocad has started a new behavior. When (in Win7) I double-click on a drawing file in Windows Explorer, Autocad opens the drawing file and also starts a new drawing, all in the same session of Autocad. Is there some system variable or Windows variable that controls this?
View 1 Replies View RelatedAutoCAD LT :: Exiting Drawing By Clicking On Small X In Upper Right Corner Of Drawing
Oct 31, 2011When exiting a drawing by clicking on the small X in the upper right corner of the drawing, my program routinely "stops working". I get the error message that it has stopped working and it closes. No chance to save work in other drawings open at the time. I often have three or four drawings open so my only workaround is to go through each and save, then close the one I want to close, let the system crash and reopen the other drawings. It does not crash every time but several times a day.
View 6 Replies View RelatedAutoCad :: Architectural Drawing - Levels Show In Model View But Not In Drawing?
Sep 14, 2011The layer is on and the ground levels on the architectural drawing in model view show the number and the box surrounding them however in the drawing window be it in the numbers have dissapeared and we are left with only the boxes ?
View 3 Replies View RelatedAutoCAD Inventor :: IPart Drawing Template - One Drawing File Versus Individual Drawings
Jun 21, 2013Setting up a tabulated ipart drawing template. Which is better...one drawing file with a table or individual drawings for each tabulation? Also does one method work better than the other when introducing vault?
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Insert Another Drawing Layout Tabs Contents In Current Drawing
Mar 7, 2013I want to insert another drawing layout tabs contents in current drawing.
It's easy for MODEL tab, but for LAYOUT tabs, I dont know how!?
I prepared a code for INSERTING MODEL tab in current drawing:
(defun INS_DWG (TAB path dwg P / blk)(setq blk (strcat ""*" path dwg """));(setq N (vla-get-count (vla-get-layouts)));;Number of LAYOUT TABS in dwg(if (or(= TAB 0) (= TAB nil))(command "INSERT" blk P 1 0)); TAB=0 or omitted ==>Insert MODEL;(if (= TAB 1));==>Insert the 1st LAYOUT in dwg file;(if (= TAB 2));==>Insert the 2nd LAYOUT in dwg file;and so on....);;;usage:;;(INS_DWG 0 "c:\test\" "test.dwg" '(0 0))
AutoCAD Inventor :: Copy Drawing Views To New Drawing Template
Sep 20, 2013I've recently made a new drawing template with ilogic prompts for entering data for all fields within the template. It also sets view sizes etc. I have lots of master drawings, which are reused when sizes etc change for a contract, which i would like to transfer to this new template. Drawing Resource Transfer Wizard does not offer this function.
I could get all drawings in a folder copied to specific sheet size on the master template.As the template will probably be developed further in the future I'm very loathed to do this take manually.
AutoCAD Civil 3D :: Opening Drawing In 2013 And Drawing View Changes?
Nov 28, 2012Recently upgraded to Civil 3D 2013 and drawings opened up fine. Now today any drawing that opens shows the plan view as last saved but then after loading takes the drawing and shifts it into a 3d view similar to a crossection. Is there a setting somewhere that has been changed? I noticed after a windows 7 update was preformed.
View 7 Replies View RelatedAutoCAD 2010 :: Change Drawing Scale In Drawing Settings
Jul 25, 2012I realize it may be a Civil3D question. When I change my drawing scale in the "Drawing Settings" dialog box to 1"=40', for example. The Annotative scale in the Properties Palette changes to 1"=40'_XREF.
View 2 Replies View RelatedAutoCAD .NET :: Parse A Drawing To Bring Back Text From Drawing
May 9, 2013I'm taking over the development of some Autodesk addins that are used to parse a drawing to bring back text from the drawing, namely title block and bill of materials information. I have another process that runs and reads the meta data for the drawing itself that gets run from Vault before checking in the drawing. I need to know if I can combine these two processes such that I can parse the drawing outside of AutoCad. Is this possible?
View 3 Replies View RelatedAutoCAD Inventor :: Inserting One Drawing Into Another / Linking Contents Of One Drawing To Another
Dec 2, 2013I would like to know if there is a way to insert drawing no.1 into drawing no.2 (not copy sheets!) so that if I change the drawing no.1, the drawing no.2 (the one that contains no.1) also updates.
That is because I would like to have one part of the drawing that is ''standard'' and multiple drawings that contain this part (so that this part is defined in all drawings but is always the same). Because I don't want to have a separate drawing for the ''standard'' part, but only drawings that contain it.
AutoCad :: How To Change Flat Drawing Into Isometric Type Of Drawing
Aug 4, 2009is it possible to change a 'flat' drawing into an isometric type of drawing? I currently have an end view of an item that I need to draw in isometric, but it's fairly detailed with curves etc and will take a long time to draw again from scratch in isometric...
View 7 Replies View RelatedIllustrator :: How To Convert Vector Drawing Into Non-clipping Paths Drawing
May 5, 2013I want to take two 3D views from (autodesk) Revit Architecture 2012 to Illustrator CS5 and then make use of the live paint bucket tool*. I've printed the two 3D views into pdf files and imported them in Illustrator**. When I select the whole image in Illustrator and then click with the Live Paint Bucket tool on the drawing to modify the drawing so I can color the surfaces, Illustrator gives me the following error:
"The selection contains objects that cannot be converted. Live Paint groups can only contain paths and compound paths. Clipping paths are not allowed."
Exporting images (jpg, png and tiff) from Revit results in the same error. Is there a way to easily convert my vector drawing into a non-clipping paths drawing? Also I'm not sure if the problem should be found in either Revit or Illustrator. What's also strange is that I'm using a tutorial provided by my university, in which there are no issues with clipping paths or anything.
* This in order to make an conceptual image of my building, which I've modeled in Revit. I want to add basic colors to surfaces in Illustrator and then take the image to Photoshop to add shadow, materials, sky etc.
** They only consist of lines, using the 'hidden line' visual style in my views in Revit, in case you know a bit of Revit.
AutoCAD Map 3D :: Drawing Disappears After Opening Second Drawing In 3D 2012?
Mar 23, 2013I have two drawings A and B. I work in A and I need some design elements from B.
When I open the drawing B everything I have in drawing A disappeared. I refer to all elements of design (blocks, lines, polylines, etc.).
After studying the issue have concluded that the design of all elements were automatically isolated. Right click> Isolate> End Object Isolation and everything reappears in drawing A.
I mention that I installed Autocad Map 3D 2012 x64 on Windows 7 x64 and work in Map Classic Workspace using the same coordinate system in both drawings.
AutoCad :: Can't Close A Drawing Either Without Exiting / Try To Open Another Drawing
Nov 10, 2011I downloaded multi-batch as someone here said they like it for batch plotting. Once installed, however, it has changed a setting in AutoCAD. I can no longer open more than one drawing at a time. If I have a drawing open and try to open another drawing it asks me if I want to save the current open drawing.
I can not close a drawing either without exiting AutoCAD or trying to open another drawing. I un-installed multi-batch but it did not fix the problem.
AutoCAD LT :: When Opening A Drawing / Automatically Creates A New Drawing
Nov 16, 2011When I open an drawing, AutoCAD opens *two* drawings, the one I wanted *plus* a new one (called drawing 1.)Why does this happen and can it be prevented?
View 6 Replies View RelatedAutoCad :: Blocks Not Retaining Their Settings From Drawing To Drawing
Mar 5, 2012I am editing an existing block to change the lineweight and have tried using the REFEDIT command as well as double clicking the block to take me into the block editor and making my changes there. I am sucessfully able to edit my block and make the changes using both of these methods. Where I am running into an issue is that the block I have edited only retains its new settings within the drawing that I changed it in. If I insert that same block into a new drawing I have to re-edit the block again the make the changes that I want. Why are my blocks not retaining their settings from drawing to drawing.
View 9 Replies View RelatedAutoCad 2D :: Copy And Paste Surveyors Drawing Into Drawing?
Jan 17, 2013I am trying to copy and paste a surveyors drawing into a drawing I've been working on to place my building on the site for oreintation etc.
When I copy and from his drawing onto my clipboard and paste it into mine it is waaaayyyy small.
The scale his drawing says it is drawn in is 1:1
Mine is 1/4"=1'-0"
When I xreffed it into my drawing it did the same thing. What do I do?
AutoCAD Civil 3D :: Point From Drawing A To Drawing B?
May 3, 2012I have survey points in drawing A. I want those points to be available for drawing B. How do I do this?
(Coming from LDD where points were project based not drawing specific).
AutoCad :: How To Create Mechanical Drawing From 3D Drawing
Apr 6, 2011I am self taught on acad 2008, and have created a complex 3d drawing over the last year or so. But I need it to be represented in a mechanical drawing. I tried flatshot, but this is not true to form. Is there a way to do this? (an easy way)
View 9 Replies View RelatedAutoCAD LT :: Copy Some Data From Drawing 2 To Drawing 1
Nov 2, 2011I have a user that is having a problem with two particular drawings within AutoCAD.
drawing 1 is 4MB
drawing 2 is 17MB
I believe he is attempting to copy some data from drawing 2 to drawing 1.
*nearly* Everytime he opens these two files and switches to 'Model' autocad crashes displaying the message -
--------------------------- AutoCAD LT Alert ---------------------------
AutoCAD LT cannot continue. You can attempt to save changes into the following file up to the start of the last command: S:****************
After you save your changes, you can open or recover the file.
Should AutoCAD LT try to save your changes?
--------------------------- Yes No ---------------------------