When I open an drawing, AutoCAD opens *two* drawings, the one I wanted *plus* a new one (called drawing 1.)Why does this happen and can it be prevented?
View 6 RepliesRecently upgraded to Civil 3D 2013 and drawings opened up fine. Now today any drawing that opens shows the plan view as last saved but then after loading takes the drawing and shifts it into a 3d view similar to a crossection. Is there a setting somewhere that has been changed? I noticed after a windows 7 update was preformed.
View 7 Replies View RelatedI have two drawings A and B. I work in A and I need some design elements from B.
When I open the drawing B everything I have in drawing A disappeared. I refer to all elements of design (blocks, lines, polylines, etc.).
After studying the issue have concluded that the design of all elements were automatically isolated. Right click> Isolate> End Object Isolation and everything reappears in drawing A.
I mention that I installed Autocad Map 3D 2012 x64 on Windows 7 x64 and work in Map Classic Workspace using the same coordinate system in both drawings.
I need to export faces on a part. When i do this in either DWG or DXF if creates splines in the 2d drawing. Then i have to go back and redraw all the radii. Is thier a way to convert or export without getting splines? Our machine won't recognize the face drawing unless i redraw all the circular segments.
View 5 Replies View RelatedSometimes, not in every drawing, but in certain drawings when we draw a spline it creates a jog or tail.
So when we do the command spline and click the start point then move to do the next point it will have this jog or tail at the beginning of the spline. sometimes we get it at the beginning and sometimes at the end.
How do I make it stop? is there a setting that I need to change? We typically work on drawings from Architect / Engineers.
Inventor 2009 creates XLS file when saving assembly drawing (IDW file).Why? How to get rid of that?
View 6 Replies View RelatedMy issue right now that I can't seem to find an answer to is it seems that when a certain engineer in my office opens a drawing at her computer and saves it, the drawing is slightly "twisted" i guess you could say.
I have a fix to this issue, for example, I use DVIEW and change the points to 0,0,0 and 0,0,1. Which works just fine and fixes it. But for some strange reason it seems like after she opens the file and saves it, the target point usually ends up as something like 1.35454,2.5664721,0.0000076 And I know that the last coordinate is what causes the problem.
I'm just curious if there may be a variable or something set on her computer that would keep causing that to happen when she opens a drawing so that I can set it back to default and eliminate the time spent on running the DVIEW command on every drawing that she opens.
I have a drawing that draws from a .dxf template, this drawing is for a piece that travels along on a basket. Often times there's more than one "traveler" so in order for me to differentiate each traveler I added an "XX of XX" on the template, the XX's referring to the traveler number and the total travelers (i.e. 01 of 03).
Before I print out the sheet I have to replace the XX's with the real numbers then I can print it, so if theres 45 travelers i have manually click each time and then type the number in, 01 of 45, 02 of 45, 03 of 45... 45 of 45. Is there a way I can get this process automated like where I'm asked how many sheets I need then it automatically populates the sheet?
The drawing “zooms to extent” AUTOMATICALLY!
I’m wonder why the attached file zooms to extent AUTOMATICALLY when applying some commands.
For example if I need to use the command “mleaderalign” then the file zooms out AUTOMATICALLY!!!
How to control this very weird behaviour?
Why the file may zoom AUTOMATICALLY?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I have a number of areas numbered 1,2,3......etc but I need to change the text to the following where only the last number that is underlined is to increase sequentially.
P23/L2/1
Could Tcount be used or is there a modified version available?
If not is there a quick way to automatically place a number block onto a drawing with a click and then for every other click sequentially increases the last number.
I could not get the code to work for me, and I am not a programmer or pretend to be. I need to take a model and create a dwg with ilogic. It only needs to be one flat pattern view and one isometric view.
I also need it to have center marks for all the holes and I need to add certain dimensions.
How can I automatically get point coordinates and show it in drawing. For example I have 100 points and I need to write x and y coordinates right next to the point. (not in table or somewhere else).I guess I need a plugin or smth?
View 3 Replies View RelatedWe have a raster drawing that we're trying to vectorize using Raster Tools within Autodesk Infrastructure Design Suite (Civil 3d) 2014. However the process is slow going having to convert each line within the raster drawing manually. Is there a way that Raster Tools can automatically vectorize all lines within the drawing instead of picking each and every line?
View 4 Replies View RelatedI like to keep the properties of my drawing the same as those of my model. Currently I must remember to hit the "updat copied properties" button in the drawing to discard any old drawing properties and replace them with the properties from the model.
Is there any way to automate this task (perhaps on saving the drawing?) I presume an iLogic rule could be created in the drawing template, just not sure how to go about it.
I have a Part List in the assembly drawing.
This list has Renumber Items activated.
All renumbered items become in blue cells in Part List properties table.
All added or altered after that Part Properties are not shown in this Part List.
For instance if I would add or change some Description, Comments or other properties to some parts which are in “blue” cells those will be not updated in neither auto nor any manual way.
So far I should delete and create the table again to see new added properties.
The question is: Is there are any other more simple ways to update the Part List table without recreating it from scratch?
How to automatically print the layers of a drawing in separate sheets in one go?
I wanted to print the layers of a particular drawing each in separate sheet but wondering if there might be an automated way to do so. For example, if I a particular drawing comprise 15 layers then how to print each one of these layers in a separate sheet.
Sure, there might be more than one way to achieve this (like controlling the “plot” feature on the “layer properties manager” but what I’m looking for is an automated way to print all the 15 layers separately in one go.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
When opening some drawing in Autocad 2014 it automatically creates thousands of layout out tabs which need to be deleted. This causes a huge problem while batch plotting.
View 9 Replies View RelatedI'm reading a .dwg in from a database and writing to a local file.I'm using the following code to open it after I write it to a local file. Application. Document Manager.Open(filepath); What is happening is soon as it gets to that line of code AutoCAD either crashes or it has a StackOverflowException.
I've stepped through and before I go to open the file I have double check it is there. Also after AutoCAD crashes if I go to where I wrote the file to and open it that way I can open it by double clicking it.
I want to insert or import an image that automatically recognizes my drawing coordinates.If I need to, I can use AUD (as Map 3D).However, my computer has difficulty processing too much data.
View 7 Replies View RelatedCurrently I'm converting one of our machines from AutoCAD to Inventor 2009.
This machine can vary from 1200mm to 1600mm and has a couple of options to choose from for our customers.
These dimension changes are all driven by a single excel file and the options are controlled in the an IAssembly.
Some of the 2D drawings will have a variable width, in our ERP system they are marked width dependable as followed: "partnumber/1200" or "partnumber/1410" in which 1200 or 1410 is the machine width.
Is it possible to have the 2D drawings automatically update the partnumber? so if I configure my machine as a 1200mm machine it automatically changes my drawingnumber to the actual machine width?
I need to open a bunch of drawings, update a block and then save. I am trying to do it without opening each drawing in AutoCAD. Here is the code snippet I have. I figured before I plug in my block editing code, I would test things out with just adding a line. It seems to be boing through the drawings, and I get no errors, but the line is not being added.
Dim mydb AsNewDatabase(False, True)
mydb.ReadDwgFile(Newfname,FileOpenMode.OpenForReadAndWriteNoShare, True, "")
Using Trans AsTransaction = mydb.TransactionManager.StartTransaction()
Dim btr AsBlockTableRecord = Trans.GetObject(mydb.CurrentSpaceId,OpenMode.ForWrite)
[code]...
Any tricks for opening a drawing that is too big for the computer to handle?
its 474,838 KB
So I have a problem opening this drawing that i have worked on for quite a while now and all of a sudden this morning when i tried to open it i got the following message:
"This DWG file was saved by an application that was not developed or licensed by Autodesk. What do you want to do?"When I continue to open the drawing some stuff is missing from the drawing?I am using Acad LT 2012 and this drawing was working fine until now.
Is it possible to export a drawing to pdf without opening a drawing where AutoCAD is installed.
I want to write my own code using AutoLISP or VB.Net (and not use any existing third party utility) because I have some specific additional requirements.
Currently in AutoCAD 2008, evertime I browse my folders and dbl click a dwg - AutoCAD opens that drawing in a new window. If I click on three drawings, AutoCAD has three different AutoCAD programs running.
If I'm inside AutoCAD and choose File, Open, etc... then the new drawing opens in the same AutoCAD program. I'd like for that behavior to work if I have AutoCAD already open and I browse my server thru explorer and dbl click a dwg on the server.
Is there a setting that will allow that?
Whenever I go to save a drawing or open a new one from AutoCad, a command box shows up asking me to manually type in the file name and file path of the drawing I would like to open or save. Before I could do it as most programs do (Microsoft word, excel, etc.) where I can browse for the file via folders. Has this happened to any of you before and what do I need to do to get it back to normal?
View 5 Replies View RelatedI have an issue with opening my old drawing files (.dwg). I usually make a backup copy of all the drawings I have done and save them according to the project numbers. The drawings I have difficulty opening were done ages ago and backed up on a CD.
When I was trying to open the drawings from the CD, I received error messages saying "cannot find the specified drawing file. Please verify that the file exists". I also noticed that all of those drawing files are of size between 30Mb and 35Mb. So clearly, there is some data in them.
I also tried to do copy and paste from the CD to my local machine but to no avail. It said the file may be corrupted or something. I do not know if this is to do with losing path or what.
I am very skilled in CS5 and CS4, however I have updated to CS6, However I am unable to open a simple autocad .dwg into CS6
I am using Autocad 2013
I did not know if i need to down save the file to an older autocad file. Or is there a new way of opening an autocad file into CS6
we are having a problem here at our office. this revolves around one file. When I open the file, some objects (text, hatch, lines - all different layers) disappear. This happens before any command is made, and the object that disappear are on layers that are active and not frozen on all viewports. Also, the rest of the objects on the layer are visable. Other objects on these layers are visable, and the objects that disappeared are not visable on the model space or paper space. On top of that, when someone else opens the file, different objects turn invisable, and they can see the things I cant. The drawing takes about 5+ mins to load, dispite it being not a very large file. I tried purging unused items, reconciling layers, unhiding everything, freezing and unfreezing all layers and restarting autocad.
Coincidentaly the x-ref dwg is having a very similar issue.
I've recently upgraded to AutoCAD 2012 and CADS RC 2012 and a really annoying thing has starting happening! Every time I open a new drawing or an existing one, all the layers are automatically set to 'no plot' so print previews come up completely blank every time! I then need to manually go through all the layers setting them to plot or no plot as required!
View 7 Replies View RelatedI am trying to automate opening a document and inserting a new layer in it. Inserting the layer and opening the document is quite easy, but doing both is proving to be quite difficult.
Here is the Code that I am working with. The code for creating the layer works fine in an already opened document. It seems that autocad cannot find the opened file.
Sub Open_and_new_layer()Application.Documents.Open ("C:UsersPatrickDesktopAutocad program66986691_BL_01.dwg")Dim strLayer As StringstrLayer = "BOM"Dim layCurrent As AcadLayerOn Error Resume NextSet layCurrent = ThisDrawing.Layers(strLayer)If layCurrent Is Nothing ThenSet layCurrent = ThisDrawing.Layers.Add(strLayer)If layCurrent Is Nothing ThenMsgBox "Error creating layer " & strLayer & "."Exit SubEnd IfEnd IfThisDrawing.ActiveLayer = layCurrentEnd Sub