AutoCAD Inventor :: Machine Width Automatically Updated In Part / Drawing Number
Jul 29, 2013
Currently I'm converting one of our machines from AutoCAD to Inventor 2009.
This machine can vary from 1200mm to 1600mm and has a couple of options to choose from for our customers.
These dimension changes are all driven by a single excel file and the options are controlled in the an IAssembly.
Some of the 2D drawings will have a variable width, in our ERP system they are marked width dependable as followed: "partnumber/1200" or "partnumber/1410" in which 1200 or 1410 is the machine width.
Is it possible to have the 2D drawings automatically update the partnumber? so if I configure my machine as a 1200mm machine it automatically changes my drawingnumber to the actual machine width?
View 1 Replies
ADVERTISEMENT
Jun 13, 2013
When you do a Save As or Save Copy As in Inventor the part number in the iProperties is automatically updated to match the new filename. I would expect the Document.SaveAs method in the API to act in a similar way. However I found out that this is not the case.
SaveAs: Document.SaveAs(filename, False) does not update the part number. The new part will still have the same part number as the original part. This can give problems since in the BOM parts with the same part number are interpreted as the same physical part.
SaveCopyAs: Document.SaveAs(filename, True) does work as expected and the part number will update correctly.
Is this a bug in the API? or is there a reasonable explanation for this?
Inventor 2013 SP2
View 5 Replies
View Related
Oct 28, 2013
I have two user parameters saved in a part template that are tied to the part volume and an overall estimated part weight. The user parameter Pc_Volume is the volume in cubic feet and calculated by pulling the part mass (in cubic inches) and converting to cubic feet via ilogic rule. This is then automatically run via event triggers before a file is saved and if the part geometry has changed to keep the volume up to date. These are exported because they get pulled into iproperties of our drawing files as well as used to create a parts lists showing the volumes and weights.
I have the property formats of the user parameters set to Number and to unitless and the unit display turned off so it does not show on the parts list, with a precision of 0.000 for Pc_Volume. The Pc_Weight is set the same way however with a precision rounded to the nearest whole number.
These are created this way so when we use the part file as the template when we select "Make Components" to separate our parts and tie them to an assembly all the files are then updated and the information saved for exporting.
The problem is, the Pc_Volume always comes in rounded to a whole number. The Pc_Weight Does as well, but that doesn't bother me since we want it to do that anyway. If I would go into the part file after it's created, double check the precision and then re-run the rule the volume will show up with the correct precision in the exported parameters. I don't want to have to open each partfile however to get this to update.
Attached are images of the parameters, ilogic rule, and exported results.
View 2 Replies
View Related
Sep 21, 2011
I would like to have the part number automatically be entered with ilogic.
Normally I know how to do this but this time I'm trying to have a couple constant letters with numbers to be filled in.
Example
MGR72
MGR is constant and the 72 will change with the width
What I thought would work but doesn't is
iProperties.Value('Project", "Part Number")="MGR" Width
View 2 Replies
View Related
Sep 16, 2013
We put several parts on a single drawing sheet and ,to include the part number in the drawing view label, we must edit each view label and change the type to Properties_Model and the Property to Part Number. Is there a way to set the default of a drawing view label to include the Part Number? I tried modifying the styles to include <PART NUMBER> but it the text "<PART NUMBER>" came in instead of the value. To get the value, I had to edit the view label and hit the X with a down arrow to get the part number to show up, which is not much different than having to edit the label and change type and property. I'm looking to avoid all the view label editing as much as possible.
View 9 Replies
View Related
Apr 1, 2013
I have a Part List in the assembly drawing.
This list has Renumber Items activated.
All renumbered items become in blue cells in Part List properties table.
All added or altered after that Part Properties are not shown in this Part List.
For instance if I would add or change some Description, Comments or other properties to some parts which are in “blue” cells those will be not updated in neither auto nor any manual way.
So far I should delete and create the table again to see new added properties.
The question is: Is there are any other more simple ways to update the Part List table without recreating it from scratch?
View 3 Replies
View Related
Nov 19, 2011
I'm using Autodesk Inventor 2012 SP1 64 Bit on a Windows 7 machine without vault.
I seem to be missing something. I cannot get the parts list in assembly drawing to fill the part number column. See the image below.
The BOM has the part number field filled out as shown below. Is there someway that I need to map the iProperty to the part number column in parts list?
View 6 Replies
View Related
Oct 4, 2013
I have a number of areas numbered 1,2,3......etc but I need to change the text to the following where only the last number that is underlined is to increase sequentially.
P23/L2/1
Could Tcount be used or is there a modified version available?
If not is there a quick way to automatically place a number block onto a drawing with a click and then for every other click sequentially increases the last number.
View 7 Replies
View Related
Nov 22, 2012
I am currently working on a school group project that requires me to submit all inventor files as "LASTNAME_FIRSTNAME_PART,ASSY,DRAWING,etc..NAME". My original parts were all done in mm instead of cm, so for our project, I opened all new files and derived the same parts at a different scale to fix this scale issue between the members. For the new derived parts I temporarily allowed the file name to remain as part1, part2, part3.... and continued with the assembly. Now that my assembly is complete and I would like to change my part file names to the required format, my assembly will not show the parts and (?) symbol is shown by all parts with updated file names. I also changed the original file names and now the new derived parts, when opened, have the same (?) which I assume is related to the fact that the derived parts are dependent on the original file. Is there a way to update this information? We are using INVENTOR 2013.
View 2 Replies
View Related
Oct 2, 2012
We have recently migrated our production work to Autodesk Inventor. We have a condition or rather a requirement to constantly keep a check on the iProperties of a part while in an Assembly file.
So I thought the best way to do so is to have a form which float's in one of the corners of the screen and updates the fields based on the item selected. Is this possible?
We mostly have parts one level below the assembly, occasionally we have them as a sub-assembly.
View 7 Replies
View Related
Feb 19, 2012
Is it possible, if you have a merged BOM.row to get the total quantity of each part?
inventor professional 2011 / 2012 / 2013
View 4 Replies
View Related
Dec 3, 2013
Why when I mirror a part in an assembly the mirrored part gets a new part number? I want to mirror only the position of the part which is always the same part. Is it possible to do that in Inventor?
View 7 Replies
View Related
Jan 24, 2013
I have a batch of 25 drgs that need their revision letter updated then pdf'ed. Is there a method that can be adopted, where the drg sheets can be updated automatically, then batch printed into pdf's, without having to open the individual files?
View 5 Replies
View Related
Aug 15, 2012
I am trying setup a default part list for my company in Inventor, where I am stuck at is I wish to lock the width of the columns so on all our drawings the part list is the same width, I have assigned each column its own width and when I bring it in to the drawing it's the correct size but I am able to drag the edges, and change its size, I want to lock it so if you try you cant
am I missing something obvious in the menus? Or is this a limitation with inventor.
I am using the latest version of Inventor 2013
View 5 Replies
View Related
Jun 11, 2013
I found the following code on Curtis Waguespack site. [URL] ........
View 3 Replies
View Related
Sep 18, 2013
I want to use the part number propertie to change the sheet name in the .idw
So when i insert a new sheet and place a part the part number wil be placed in the title block and i want to change the sheet name to that part number.
View 9 Replies
View Related
Feb 13, 2013
I name my files with our part numbers and the revision number. Our part numbers are 6 to 9 digits long and sometimes start with a zero! My iLogic rule, while simple, drops the first zero if its there. See the "FirstNumbers" below: (I tried to add the CStr(), but now I see that it just changes it to text after it drops the zero!)
ThisFile = ThisDoc.FileName(False) 'without extensionFirstNumbers = CStr(Val(ThisFile)) 'sets the first numbers from the file name to textPartNumber = iProperties.Value("Project", "Part Number") 'reads part number from file
'check to see if the part number is the same as the file name's numbersIf String.Compare(FirstNumbers, PartNumber, True) = 0 Then'do nothingElse
'set the Part Number to the file name's numbersiProperties.Value("Project", "Part Number") = FirstNumbers
'let's me know that something has been doneMessageBox.Show("Part Number has been set to " & FirstNumbers, "Part Number from File Name")End If
View 5 Replies
View Related
Jun 11, 2013
I created a bom export rutine but when a virtual component is the same as a inserted standard part the rowmerge does not work.
See example picture in attachment.
View 2 Replies
View Related
Jul 27, 2010
How can I get the Part Number property in pipe parts ? In the family table the part number exist, it is mapped to the Part Number property, but when I create a piping the Part number is empty.
View 7 Replies
View Related
Apr 26, 2012
I am trying to create a iLogic Rule that will measure the Length, Width and Thickness of a part and ut it into the custom fields we have. I am having a hard time remembering how to get it to do it from the assembly level. I want to run this on the assembly and have it populate all the parts inside of it. The code below will do it for a part but what is it I add to get it to drill down into the assembly?
iProperties.Value("Custom", "THICKNESS")=Measure.ExtentsHeight
iProperties.Value("Custom", "WIDTH")=Measure.ExtentsWidth
iProperties.Value("Custom", "LENGTH")=Measure.ExtentsLength
Then I want to add this formula to the Stock Number iProperty = <Length> X <Width> I can get it to add the values but I can not get it to add the formula to the stock number.
View 9 Replies
View Related
Sep 5, 2012
Is it possible to search for a part number (Not file name).
I don't have vault and I would like to find a part number on the computor but I'm not sure how and if it is possible.
View 4 Replies
View Related
Feb 26, 2013
Is there a api to read part number value in properties "Project Tab" for a drawing document?
View 2 Replies
View Related
Jul 29, 2012
I have one doubt i have one big assembly in that more than thousand parts.
my doubt is how to find particular part in browser bar.
like how to search particular part number in browser bar.
View 2 Replies
View Related
Feb 22, 2013
I want to put a flexible hose into an assembly in different places.
In the real world it would be the same part, but as the hose would needs to bend at different angles for the different positions I would need different models.
I know I can group components with the same part number in the Parts List, but how do I make sure the components are seen by Vault and other users as being the same component ?
Currently using Inv 2011sp2 Pro and Vault 2011. But I don't have much experience of using Pro
View 2 Replies
View Related
Jun 13, 2011
I need to make installation plans on climate ceilings, which are steel cassettes with Meandro tube element located where cold or hot water is flowing through.
[URL]......
Now it may occur that a cassette is given a code 700 which represents the type of cassette. If inside the cassette is placed a Meandro element its become a follow number eg 700-01.
It may also be that the same cassette No. 700 gets another Meandro element and because the cassette has not changed shape the number 700 remains the same but the follow number change e.g. 700-02.
At the moment I change the number in the browser,(inv2012) I therefore want automatically the iproperties ,partnumber and stock number, to fit. When I go to the BOM, the part- and stock numbers automatically will be placed.
The browser codes are not displayed in the BOM. So if I specify for change I only have to do so in the browser. I wanted to do so by iLogic but then ran into problems. I found a tutorial from Rob Cohee with ilogic so you won’t forget to fill in your iproperties.
[URL].......
I also wanted to do so with the iproprtie Stock number but get an error stating that I must declare the name. How must i declare a name.
Also i was told for entering the browse name in ilogic i had to use displayName, but I get a error stating that the name is Read Only.
So how can i, after i change the browse name, automatically fill in the iproperties ‘part number and/or stock number? Is there an ilogic code for?
View 4 Replies
View Related
Apr 23, 2013
Is there a way to get a part number on pipes created by the routing tool? It seems that if it's default or custom data, the data gets blanked out on the generated files.
I'm trying to get this to work for a client who uses 2011, and from what I can tell this is still an issue in 2013.
View 1 Replies
View Related
May 3, 2011
I created an iPart which includes 10 or more different part. I need put the part number (text) on the surface (could use emboss or extrude). When I change the part, I need the embossed or extruded part number can be changed automatically.
View 4 Replies
View Related
Jan 28, 2013
I have made a configurator, that defines my part. Now i would like to add some intelligence for the Save process...
When i activate my rule it should.:
1. Go to a Excel spreadsheet and find next Empty cell in a specific collum
2. Place Title from inventor in that empty cell
3. Return the value from the cell next to this cell
3. Use this value as the new filename for my part.
Example: here i would like to get the parts tile put into B3 and A3 (103) returned to Inventor as filename to my part
--------------------
A B C
1 101 Title1
2 102 Title2
3 103
If possible, i would like to be able to adjust this alittle as i go forward in my work,
View 9 Replies
View Related
Dec 6, 2011
I would like to link a cell value in excel with the partnumber from a assembly in Inventor. How can I made this link?
View 1 Replies
View Related
Aug 22, 2012
I want a part number which is made with a parameter write to excel to the excel sheet to link to acad. I have the following code that runs smoothly and requires the excel sheet to save but get nothing written in the cell.
GoExcel.CellValues ("M: AutoCAD AutoCAD 2012 Inteco3D File Test ExportPartNumber.xlsx", "Sheet1", "A1", "A10") = MultiValue.List ("Part Number")
View 4 Replies
View Related
Apr 30, 2012
I just wondered if can I assign a particular ITEM number to a particular part, instead of relying on order in the assembly.
I unsterstand I can overrite it in BOM but can I have it controlled from the part, so any time I instert it into an assembly, this particular number in ITEM coulmn pops up?
View 9 Replies
View Related
