How can I strip all data from an Image?
Like Rating, comments, ICC profiles, Guides and Slices, EXIF, RAW, Camera data ... etc.. etc.. I would like to strip all the data from my images that I use as album art for my Media Center..
I just want an Image and nothing else.
I often produce product images for clients that they then supply to their distributors and I prefer that my camera EXIF data not be included (none of their business). I use various actions to produce a variety of sizes and colourspaces (sRGB and CMYK) from the original PSDs. Unfortunately Photoshop seems to lack the ability to strip the camera EXIF data from a PSD file other than by copying the image to a new document. This is fine for a few images. But when you have 50-100 images it's not very practical.
Here's an action that would work:
Note: Image layers are not supported and the colourspace is lost so you will need to make note of the colourspace of the originals.
Action 1 : Open (flatten) and save the RGB or CMYK PSD files as Scitex Format (SCT).
Action 2: Open .SCT files, assign the now missing colourspace tag, re-save as PSD.
I can then add any metatags that should be embedded in these images.
But does anyone know of a plugin or post-processing utility that will strip selective metadata (ie: camera info only, not the metatags with the company info, copyright etc..) from RGB and CMYK 'Photoshop format' images?
how to achieve the old two-way and three-way Technicolor look? Im sure one can do it with the channel mixer.
View 4 Replies View RelatedI have been mocking up an image on Photoshop, the final image basically consists of a variation of placed images. Whenever I zoomed in, one small part of the image wouldn't load properly and instead be pixelated. Usually it would go away once I either zoomed in or out a step further. But now it has just remained there and I have a pixelated strip that won't go away.
I'm not too sure why this may have occurred? This is a small screenshot of the strip:
How do i create an image in PSE11 to look like a negative strip? I have been able to do this in the past in older PSE but i cannot find the option in this version.
View 3 Replies View RelatedHow do i create an image in PSE11 to look like a negative strip? I have been able to do this in the past in older PSE but i cannot find the option in this version.
View 6 Replies View RelatedIt was all about 64bit-32bit versions.
I've installed 32-bit CS6 and now everything works perfect.No white lines after applying/resizng anything.
When in the develope module I have the film strip at the bottom of the page, I export the current image to CS 6 and then save from there. On returning to LR the last image saved is always at the right hand end of the film strip. You then have to scholl all the way to the left to find your next image to edit. Is there away of stopping this happening..
View 2 Replies View RelatedI am working on parsing the psd file and saving the data as per doc of photoshop 6. I need to make an image from the layer data alone with different combinations of layers selected, visible etc... and not using the merged data section in the file.
View 1 Replies View RelatedI've been given a college assignment where I have to make a 6-8 image comic strip story, where I'm the main character, either hero or villian. Now I have a few ideas bouncing around my head, but thought I'd ask if anyone else has ever had to deal with a similar project, before I went ahead with anything.
Can anyone offer any advice as to design? Any suggestions/ideas as to the content or a storyline? All comments welcome, the teacher gave us the freedom of artistic expression and I plan to use it!
I am trying to make a film strip look like the river thames. i tried warping and this didn't work. i can use photoshop or illustrator.
so imagine a reel of film in the shape of the inner london river thames.
I have a picture which is a panorama of a relief panel (think hieroglyphics). What I am wanting to do is strip out all the background so all I have is the lines of the relief art.
What I have tried is adjusting the brightness/contrast, turning the image into greyscale and selecting colour range but I am not getting the effect I want. I don't want to go too extreme and do line drawings of the panel. Ideally I would like to use the lines of the image as they appear and I'm sure there must be a way of doing this in Photoshop.
So here's the problem. I managed to delete a photo from my digital camera. Now I need it back. I recovered the file, but strangely, it's not actually recovered.
Now, I know file recovery is hit and miss, and since this was a photo from the camera itself (not a memory card), things get more complicated. Anyway, I manged to get back the photo...sort of.
The file I now have is 160x120, instead of the 3040x2288 it should be. Now, if this was an actual thumbnail, I would expect the file size to be pretty small. Instead, this little 160x120 image is 2.16MB. This leads me to belive that somehow I can get the real photo (or at least something better than the little image) back from the file. There has to be a reason for that much extra data, right?
Does anybody know how to do this? I figured Photoshop might have some advanced sort of raw file reading or some sort of rebuilding/recovery. Alternatively, someone could point me to a good recovery program (or even some other way to do this).
If it helps, the camera that the file came from is an HP Photosmart M627.
I have a large number of images for which I need to collect various data points that photoshop and its plugins produces (i.e., histogram RGB mean, SD, etc.). I'm looking for a way to write this data to a *.dat or *.txt type file from automated manipulations. The structure would need to include the image filename, and all the values captured that are associated with the image.
View 1 Replies View RelatedI am using Elements 10 and 11. I would liike to be able to retrieve image data....for example focal length; f-stop; shutter speed and ISO. Wether this is possible and how to do it?
View 1 Replies View Relatedthe situation is this:
* i have a cube with "Noise Rotation controller" assigned.
* On the other hand, i make a strip that comes flying in a straight line (a rectangle whit "path deform modifier" OSM).
* when both meets, the strip moves around the cube following it, and then keep his trajectory in a straight line.
I resolved attach the path to the cube, and works pretty well in the middle section of the trajectory , but at the start the path keep rotating whit the cube, and mess it up.
in others words, i need to attach temporarily, only when the strips fly around teh cube.
This is purely a sitting infront of autocad with nothing better to do question,is it possible to draw a "MOBIUS STRIP" with autocad.it would be cool to do, have fun trying its baffled me, but then again thats not hard .
View 9 Replies View RelatedI'm about 1 day into IV and thus far I'm loving it, so happy I chose it over Pro/E.
Right now I'm playing around with its capabilities. How to go about making a 3D mobius strip in IV?
How do I strip away all the white space around a graphic?
View 1 Replies View Relatedcan I strip audio out of movie file in LR
View 4 Replies View RelatedThe filmstrip is dim in print module. Everything else is visible.
View 3 Replies View RelatedOn the edit screen, the orange strip, which I assume means content, stops at approximately 7:31 on my timeline. All vide I have added stops here on my preview. I cant get past it.
View 1 Replies View RelatedIs there a way to set up a layer filter to strip off the xref name?
I have standard layers in all my drawings. I want to use a filter to setup the type of drawing.. i.e erosion control.
However, from project to project the xref file name changes so filters don't work with the new name...
Anyway, if there is a way to hide the xref filename from the prefix of the layer.. if so, a standard layer filter would grab all the layers with the same name.
Civil 3D 2012 SP2
Win 7, 64 bit
I can add my own colors to the strip at the bottom of the screen, but time and time again I need to use grayscale that has to be just gray and its not! For instance if you pick 50% black and then click on CMYK scale it turns out to be C:49% M:45.5% Y:32.5% K:11%...Why is it not 0 0 0 50?
if you send something off to the printers with what you think is small grey text that looks sharp on your RGB screen it may well be fuzzy when you see it in hard copy from an offset press.So it would be great to redefine the standard strip, or at least be able to load a user strip every time the program starts.
Using ver. 4.3 with Win7.
I'm trying to get Lightroom to display only the photos I select in Grid View in the film strip but
I've got a problem where 'embed color profiles' keeps turning back on. But not just for me, everyone at my company. If you don't notice, then it ads 500+ K that's half a meg and on 1000's of drawings.
Idea for sorting through all of my CDR files and striping out the color profiles without opening each one by hand?
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
In develop mode how do I make the images in the film strip at the bottom larger
View 1 Replies View RelatedSo i can create a photo strip in Lightroom and i have (just adding 2x2.5" cells and dragging pictures over) but after trying to add an additional picture it changes all the cells to the new picture. After researching it seems that Lightroom wont let you add/print different pictures on the same sheet. So i have two questions:
1. Can you not add mutiple pictures in terms of a photo strip and print out in Lightroom 4?
2. What adobe software (or even apple aperture) can you create a custome photo strip and add text for the event at the bottom and print? Preferrably something that is simple for like when my Canon 7D takes pictures and you can drag and drop into the cells, determine # of prints and print, on the spot. I am starting a photo booth company where person #2 will manually move pics on my Macbook Pro (if need be) to the photo strip template and determine # of prints (not automated).
On LR 3.6 I cannot view my photos on the film strip in the LIBRARY setting. On DEVELOP I can view on photo at a time on the film strip (the rest of the photos are not viewable). This is a new problem which has only occured on the last two imports.
View 3 Replies View RelatedIs there a way to set the default width of a strip drawn with QuadDraw tool? (Quad Draw tool, ctrl+****f+drag RMB)
The size appears to depend completely on screen space. I'd like to be able to specify a width in units.
I have Lightroom 4.4. and Windows 7--both of which have been working fine for several months. Starting a few days ago, however, thumbnails have refused to load for any NEW photos I import. They appear gray/blank in both Grid view and the film strip. However, if you click on any of the film strip thumbnails (while in either Grid view or Develop mode), that thumbnail and corresponding image WILL load--until up to three have done so. Then they begin disappearing again, allowing you to view no more than three images' thumbnails at any one time.
I can't review a shoot via Grid mode this way. I'm also afraid to use Lightroom while it's misbehaving, for fear of corrupting the catalog somehow (though all the images appear to be there). Searching this forum, I found several people who experienced having all of their thumbnails blank out and who were able to correct this by either reinstalling or removing their color profiling software. However, 1) I did this (and it didn't work), and 2) it isn't that all my thumbnails that have disappeared. All the thumbnails and images imported prior to the bug, still initially display correctly.* And I can get three thumbnails of the newer images to appear at a time.
*The asterisk is because after I poked around some more, I realized that if I opened other folders and began post-processing images from older uploads (vs. just viewing them), the thumbnails that initially displayed correctly everywhere also blank out and begin appearing in this up-to-three-at-a-time fashion.