Photoshop :: Strip Background From Pic Of Releif Wall
Feb 24, 2009
I have a picture which is a panorama of a relief panel (think hieroglyphics). What I am wanting to do is strip out all the background so all I have is the lines of the relief art.
What I have tried is adjusting the brightness/contrast, turning the image into greyscale and selecting colour range but I am not getting the effect I want. I don't want to go too extreme and do line drawings of the panel. Ideally I would like to use the lines of the image as they appear and I'm sure there must be a way of doing this in Photoshop.
I took a picture of my kids against our kitchen wall, which is basically a solid color, but I would like to change the color behind them to a solid white.
way to change the color from one color to another ?
Later on, I want to have them with a Christmas background instead of the kitchen wall, so that will be my next step, but I wanted to start off with something easy to learn.
I don't want to cut out the background using the magic eraser, etc. I'd rather just change the color.
Like Rating, comments, ICC profiles, Guides and Slices, EXIF, RAW, Camera data ... etc.. etc.. I would like to strip all the data from my images that I use as album art for my Media Center..
I've been given a college assignment where I have to make a 6-8 image comic strip story, where I'm the main character, either hero or villian. Now I have a few ideas bouncing around my head, but thought I'd ask if anyone else has ever had to deal with a similar project, before I went ahead with anything.
Can anyone offer any advice as to design? Any suggestions/ideas as to the content or a storyline? All comments welcome, the teacher gave us the freedom of artistic expression and I plan to use it!
I have been mocking up an image on Photoshop, the final image basically consists of a variation of placed images. Whenever I zoomed in, one small part of the image wouldn't load properly and instead be pixelated. Usually it would go away once I either zoomed in or out a step further. But now it has just remained there and I have a pixelated strip that won't go away.
I'm not too sure why this may have occurred? This is a small screenshot of the strip:
How do i create an image in PSE11 to look like a negative strip? I have been able to do this in the past in older PSE but i cannot find the option in this version.
I often produce product images for clients that they then supply to their distributors and I prefer that my camera EXIF data not be included (none of their business). I use various actions to produce a variety of sizes and colourspaces (sRGB and CMYK) from the original PSDs. Unfortunately Photoshop seems to lack the ability to strip the camera EXIF data from a PSD file other than by copying the image to a new document. This is fine for a few images. But when you have 50-100 images it's not very practical.
Here's an action that would work:
Note: Image layers are not supported and the colourspace is lost so you will need to make note of the colourspace of the originals.
Action 1 : Open (flatten) and save the RGB or CMYK PSD files as Scitex Format (SCT).
Action 2: Open .SCT files, assign the now missing colourspace tag, re-save as PSD.
I can then add any metatags that should be embedded in these images.
But does anyone know of a plugin or post-processing utility that will strip selective metadata (ie: camera info only, not the metatags with the company info, copyright etc..) from RGB and CMYK 'Photoshop format' images?
How do i create an image in PSE11 to look like a negative strip? I have been able to do this in the past in older PSE but i cannot find the option in this version.
Any way to get a wall sweep that's set up in the type/structure properties to follow a wall if that walls profile has changed. For example, in the image below, I've split the wall and adjusted it's profile to create some cheesy angled parapet. How do i get my wall cap to follow along? I thought splitting it and changing it's height would work, but no. And if I change the profile without splitting the wall the wall cap just runs right through the wall, as if the profiel was never even changed.
I have to draw a bulkhead wall that connects to a full height wall and a gyp bd ceiling. This causes the entire end of the full height wall to skew in line with the butt joint above the ceiling level. I tried Wall Joins but all the options screw up the bottom half of the wall which needs to remain in line with the paired opposite. I also tried editing the sketch of the wall profile but Revit couldn't keep the elements joined. I tried trimming the two walls back together afterwards but the wall profile dominates and prevents a clean join above the ceiling.
Surely there's a way to have different kinds of joins at different heights?
I am using the RetainWallVertical subassembly with a created gutter subassembly attached to the wall and a DaylightGeneral subassembly attached to the gutter assembly. My cut slope parameter is set to hold at 1.5:1. I would like to use a target (feature line or alignment) to daylight to and have the wall height adjust accordingly. Problem, I am not able to use a target other than a surface for daylighting. I can use my existing ground surface, which I am daylighting too, but I can't adjust the target point.
I'm attempting to create a wall style that has 2 components, a framed wall and a brick veneer. What I would like to do is have this wall react a certain way when I insert a window. Basically, I don't want the window to cut into the brick veneer, only the framing.
I have attached my attempt so far, and I have not figured out how to get the window to only cut the framed portion.
I am trying to align the curtain wall with the edge of the concrete slab/face of wood framed wall (Core). I have tried to align and move however the whole wall moves as well as the edge of the slab. How I can move the Curtain wall leaving the other elements in place?
Refer to the attached file. How can I cut the RED part of the Wall 1 (W1) , where Wall 2 is sloped. I also want to cut a hole in wall 2 (W2) by the BLUE rectangle , but why I can't do that .
I also want to add a second floor to my project but I can only see the" Level" icon goes grey and I can't click it.
When I try to change the length of a wall it grows at both end. How to grow at one end only?
When I change the wall type to one with a different thickness, I cannot control which face of the wall remains fixed and which face moves. eg: change from 130mm to 250mm screws up my room width. How do I do this?
I am trying to make a floorplan of my house in Revit 2013, but I am having an issue when it comes to one wall in my house. I have an opening in the Master Bedroom that leads to the bathroom. This wall has a weird arched-like opening in it and I have no clue how to make this in Revit. I have attached a sketch.
Also, my exterior walls are 7' tall but the interior walls start at 7' and go up to 8' once in the middle of the house and reduce back to 7". How does one set that up in Revit?
EDIT: May have made the image too small to see, but the top is not arched, it is actually half of a decagon.
I have a question about wall profiles. I want to make a profile on a wall so I can make Zinc Panels on the wall that are 10" X 20". I've attached a picture of what I'm going for. I'd like it to have a 1/2" spacing between them and with a joint depth of 1" and I'd like to do this is the wall type so that I can use this wall in multiple places rather than having it model-in-place. Anyway I have made a profile that is 1" X 10" so that it can become my panel profile. But when I go to add it to the wall as a wall sweep as I have seen people do I get hung up on how to make it tile up the wall and also I don't understand how to make the profile so that it is 20" wide. I have a screen shot of where I'm editing this too. Below is the link of the site.
I can convert a wall to a curtain wall but not a curtain wall to a wall. When converting a wall to a curtain wall I select wall in the design pallette right click apply to wall select the wall and it changes to a curtain wall. When I try converting a curtain wall to a wall I right click on curtain wall select apply properties to wall then go to select the curtain wall but I cannot select the curtain wall as a wall?
I simply want to convert an existing curtain wall to another wall type how is that done/
“Drag wall end” to the edge of the wall (indicated),In the attached screenshot, I wanted to drag the end of the temporary dimension from its location to the end edge of the wall but sounds not to respond!
How this temporary dimension can be dragged to the edge of the wall?
* i have a cube with "Noise Rotation controller" assigned. * On the other hand, i make a strip that comes flying in a straight line (a rectangle whit "path deform modifier" OSM). * when both meets, the strip moves around the cube following it, and then keep his trajectory in a straight line.
I resolved attach the path to the cube, and works pretty well in the middle section of the trajectory , but at the start the path keep rotating whit the cube, and mess it up.
in others words, i need to attach temporarily, only when the strips fly around teh cube.
This is purely a sitting infront of autocad with nothing better to do question,is it possible to draw a "MOBIUS STRIP" with autocad.it would be cool to do, have fun trying its baffled me, but then again thats not hard .
