When in the develope module I have the film strip at the bottom of the page, I export the current image to CS 6 and then save from there. On returning to LR the last image saved is always at the right hand end of the film strip. You then have to scholl all the way to the left to find your next image to edit. Is there away of stopping this happening..
View 2 RepliesThe filmstrip is dim in print module. Everything else is visible.
View 3 Replies View RelatedUsing ver. 4.3 with Win7.
I'm trying to get Lightroom to display only the photos I select in Grid View in the film strip but
In develop mode how do I make the images in the film strip at the bottom larger
View 1 Replies View RelatedOn LR 3.6 I cannot view my photos on the film strip in the LIBRARY setting. On DEVELOP I can view on photo at a time on the film strip (the rest of the photos are not viewable). This is a new problem which has only occured on the last two imports.
View 3 Replies View RelatedI have Lightroom 4.4. and Windows 7--both of which have been working fine for several months. Starting a few days ago, however, thumbnails have refused to load for any NEW photos I import. They appear gray/blank in both Grid view and the film strip. However, if you click on any of the film strip thumbnails (while in either Grid view or Develop mode), that thumbnail and corresponding image WILL load--until up to three have done so. Then they begin disappearing again, allowing you to view no more than three images' thumbnails at any one time.
I can't review a shoot via Grid mode this way. I'm also afraid to use Lightroom while it's misbehaving, for fear of corrupting the catalog somehow (though all the images appear to be there). Searching this forum, I found several people who experienced having all of their thumbnails blank out and who were able to correct this by either reinstalling or removing their color profiling software. However, 1) I did this (and it didn't work), and 2) it isn't that all my thumbnails that have disappeared. All the thumbnails and images imported prior to the bug, still initially display correctly.* And I can get three thumbnails of the newer images to appear at a time.
*The asterisk is because after I poked around some more, I realized that if I opened other folders and began post-processing images from older uploads (vs. just viewing them), the thumbnails that initially displayed correctly everywhere also blank out and begin appearing in this up-to-three-at-a-time fashion.
I am trying to make a film strip look like the river thames. i tried warping and this didn't work. i can use photoshop or illustrator.
so imagine a reel of film in the shape of the inner london river thames.
how to achieve the old two-way and three-way Technicolor look? Im sure one can do it with the channel mixer.
View 4 Replies View RelatedHow can I strip all data from an Image?
Like Rating, comments, ICC profiles, Guides and Slices, EXIF, RAW, Camera data ... etc.. etc.. I would like to strip all the data from my images that I use as album art for my Media Center..
I just want an Image and nothing else.
I have been mocking up an image on Photoshop, the final image basically consists of a variation of placed images. Whenever I zoomed in, one small part of the image wouldn't load properly and instead be pixelated. Usually it would go away once I either zoomed in or out a step further. But now it has just remained there and I have a pixelated strip that won't go away.
I'm not too sure why this may have occurred? This is a small screenshot of the strip:
I saved my book in LR.
It shows up as a collection.
How can I add an image to it?
The folder from where I made the book doesn't show the created book anymore.
How do i create an image in PSE11 to look like a negative strip? I have been able to do this in the past in older PSE but i cannot find the option in this version.
View 3 Replies View RelatedHow do i create an image in PSE11 to look like a negative strip? I have been able to do this in the past in older PSE but i cannot find the option in this version.
View 6 Replies View RelatedI have a capstone lab project due tomorrow for my graphic arts class and I made a HUGE mistake!!! I created an image using 20 something layers and did SAVE AS as a .xcf image (with all layers open). Part of the project was to save in different formats: .xcf (with open layers), a .png, and a .jpeg (optimized). So, I did the first save and then flattened the image to SAVE AS a .png with a different file name.
Long story short, I was tired and had way too many images open at once. When I was closing all of the images I accidentally saved the changes (flatten image) to my original .xcf (with open layers)!!!! Now, my .xcf that is supposed to have open layers only has one layer...the finished project!! I tried going to the file properties to restore a previous version, but it says that no previous versions were found! I also downloaded a norton "unerase" utility, but maybe I am not scanning properly to locate the file!?!
Why Image flip operation is not saved into history?
View 12 Replies View RelatedIs it possible to either print or save an image that shows the crop lines from Lightroom (i.e. shows what is both in AND out of the image as it is cropped). I'm working off a scanned negative and I want to show my printer just how to crop the image. She was hoping to see both what's inside and outside the crop? Possible to get that to her either by printing that from my computer or emailing it to her?
View 1 Replies View RelatedIs there anyway to make a sharp digital photo look like a non-sharp film photo? Or maybe I'm thinking of a scanned-in image?
View 5 Replies View Relatedcan I strip audio out of movie file in LR
View 4 Replies View RelatedIt was all about 64bit-32bit versions.
I've installed 32-bit CS6 and now everything works perfect.No white lines after applying/resizng anything.
When a raw file badge shows that the file has been changed, I use Metadata Save to File & for the large majority of my images, the badge goes away and Metadata Status Changed does not show the file. For some of my files, however, the Save to File command doesn't work properly. If I am only displaying files with changes, the file briefly disappears, then returns. Even if I go to Windows Explorer and delete the xmp file, then again Save metadata to file, it pops up again with the badge saying it needs to be saved. I'm using Lightroom 4.3 64 bit on Windows 7.
View 12 Replies View RelatedSo i can create a photo strip in Lightroom and i have (just adding 2x2.5" cells and dragging pictures over) but after trying to add an additional picture it changes all the cells to the new picture. After researching it seems that Lightroom wont let you add/print different pictures on the same sheet. So i have two questions:
1. Can you not add mutiple pictures in terms of a photo strip and print out in Lightroom 4?
2. What adobe software (or even apple aperture) can you create a custome photo strip and add text for the event at the bottom and print? Preferrably something that is simple for like when my Canon 7D takes pictures and you can drag and drop into the cells, determine # of prints and print, on the spot. I am starting a photo booth company where person #2 will manually move pics on my Macbook Pro (if need be) to the photo strip template and determine # of prints (not automated).
I am using the Nikon Super CoolScan8000 and Vuescan program to scan a slide film. I am scanning at this setting: scan resolution 4000 dpi. I have to make it a certain dimension that someone has been asking me for. They want the image at Width = 60cm (approx. 23 inches) and 300 dpi.
When I scan at 4000 dpi, I'm not sure what size to make the printed width. I have experimented numerous times and I've had no luck with getting exactly what I want. It seems that when I make the width 60 cm (the height adjusts proportionately) and the dpi at 300, the quality is not that great, which it definitely needs to be because it will be printed at a large size.
PS I am using Adobe Photoshop CS3 and I also have Adobe Photoshop Elements 9.
I created a Web Gallery and forgot to update the folder name for the FTP server.
How can I update the saved gallery? If you change module and double click again on the saved gallery icon, the changes are lost.
Here is what I get via right click:
How do you solve this without the need to delete and save the gallery again?
I do invert negatives it in PS CS6 and was wondering if LR5 has that ability?
View 4 Replies View RelatedI scan mid format film, and I would like to ask you what is the best way to remove or reduce film grain?
View 2 Replies View RelatedI would like to export this to use as visual references for a client to see.
View 1 Replies View RelatedHow do In scan negative film to be able to see tiffs in Lightroom 4?
View 9 Replies View RelatedI have a modeled right hand part and a detail drawing of that right hand part with a pin that defines r.h from l.h. and I would like to save them as a left hand part then change the model by reversing the pin. How would I proceed with this task?
View 3 Replies View RelatedUsing an old enlarger I managed to take pictures of old 6x6 cm black and white film negatives. And promised someone to do so with a lot of them (her father's heritage).
I have come up with the following temporary starting points:
I just started shooting film again. Having just received back my first few rolls back scanned as JPEGs on to CD, I wanted to import these into my Lightroom library (LR5), but have been unable to do so.
I am trying to import them the same way I import RAW digital files, but when I try that way, they won't import. The only way they import is when there is no destination file set and they are simply stuck in a general "New Folder". Even when I try to simply rename the "new folder" to something more specific I am unable to do so.
I have cs5.1 and when I convert an image to cmyk and save to tiff the saved image grays-out.
View 2 Replies View Related