How come my page size keeps changing back to the default (Din A4), even thought I've changed it and clicked either 'done' or 'print', even on the very same document? How can I have Photoshop CS5 remember the page size and the other variants?
View 9 RepliesI need to design my first template using photoshop. the content area of the web site will be 980px ( width ) ..
I like to add border to each side ( left and right ) .. i seen many sits using background image that spans the entire screen and has left and right boarder added to the background , which effectively looks like border on each side of content area.
however, i was not able to figure what would be the best canvas size for this . as each site i looked at , background was set to different size ..
my main content will be in center of the monitor .
When I open a photo from one of my files in PE10 and want to print it at 4x6 (which I properly indicate in the appropriate box,) it will do that if I keep the photo centered on the page. But if I move the photo to the top of the page so that I can print two photos on the same sheet, it will crop the photo and reduce the size to 4x4 1/4".
Is there any way of keeping the size at 4x6 at the top of the page, or can I print only with the photo centered on the page?
I’m using Photoshop CS 8.0 not the newer versions of CS2-5, in my previous versions of Photoshop before CS I was able to print Tabloid paper sizes, and in the new CS under page setup tabled is no longer in there. I am running windows 7 64-bit, the printer is a Xerox Work center 7345 with updated drivers. the printer sees and recognizes the paper size under the control panel printer driver preferences. but Photoshop CS will not see that size available.
View 3 Replies View RelatedI need to know how many pixels. like ?? by ?? to make a page the same size as a printer page ...
View 2 Replies View RelatedI have always been able to print (FIT TO PAGE) 8.5 X 11 (LETTER SIZE) PHOTOS in PREVIOUS VERSIONS OF PHOTOSHOP ELEMENTS! I recently downloaded version 10 and it will not print full page photos. How to achieve printing full size page photos with no white borders around the photo in version 10!
View 1 Replies View RelatedI have two documents, both with 300 DPI. The first is a 4x5 image and the second is an 11x17 page. I am trying to drag the entire 4x5 image (it's composed of several layers) onto the 11x17 page and keep it the same size. However, when I drag and drop, the 4x5 image is enlarged to fill the full width of the 11x17 page. This happens even if I hit shift. I recently upgraded from PSE10 where I did this regularly and can't figure out how to do it in PSE12. I have an iMac with OS 10.8.5.
View 11 Replies View RelatedI have misplaced my Photoshop book and I have a project in which I need a tool and I can't remember what it is. It is a particular type of brush, I belive, that grabs the colors from the surrounding pixels to blend color. Does this brush indeed exist, and if so, where can I go about finding said brush?
View 2 Replies View RelatedFile settings have been moved to the printer settings. Each time I go to printer settings and specify the paper (heavy glossy in this case) and/or number of pages to print...
I get only one page printed. Each time must reprint AND reset the paper type.
Settings are NOT remembered as Adobe says after clicking either the Done or Print button.
This is CS5 32 bit Extended v 12.0 on HP color laserjet 2605dn (duplex printer. HP only makes a universal driver now, this is the latest version on Windows Pro 7.
I running a bunch of images through the save for web, and each and every time I have to navigate to where I want the final images to go.
View 3 Replies View RelatedI'm recovering from a crash and trying to install PhotoFrame 2.0 into PS7. Remember the problem?, the PhotoFrame wants to install in folder: Photoshp.exe (dropping the O because they were limited to 8 letters?. Newer os allows full name. I think Erik, you are familiar with the problem and the fix. But do you remember?
Hope some ones does. I did install the program in old PS5 and used Erik's technique of having plugins on C drive and making a shortcut to PS7's plugins but can't see to get the whole program to move over.
why 25.5 by 33 inches has become the default page size in Draw? It's set at letter but the ruler shows otherwise and the snapping function is totally gone.
This happened yesterday as I was creating a custom document- I wound up uninstalling the whole suite and reinstalling today and within half an hour it happened. (after editing a bitmap from within Draw).
Is there a way to set what the default page size when you start XP&GD 2013? It always starts with a page size of A4 which I never use. I have a custom template that I would like to set as the default page size.
View 2 Replies View RelatedIn XP&G7, my "Selector" tool has become the "Page Size" tool and I can't select anything. It just changes my page size. What did I do??
View 9 Replies View RelatedI just downloaded paint and am giving it a whirl at my company. We're trying to move away from old programs we still somehow use. My question is if I have a piece of line artwork that's 7x 8.5, the standard font size we use is 12. Yet when I type it into the artwork, it looks like it's size 6 comparatively.
View 5 Replies View RelatedIs there a workaround to get other page sizes then the few ones Lightroom lets me choose in the Book module?Or is there a way to start off with one of the baked-in sizes and adjust it to another size, say 20 x 15 cm?
View 1 Replies View RelatedI choose black, make some text and accept the outcome.I then click in the file to do it again, and the text box color at the top reverts to white. CS5?
View 7 Replies View RelatedFound one more problem with Save For Web in Photoshop CS6.
Example:
1. New Document
2. Choose - Save for web
3. In dialog window Photoshop CS6 offer to save in - os My Document Folder
4. Ok, every time I don't really need to save in os folders - I save files to my folders. So, change folder ...for example to disc D
5. Create another New document
6. Choose Save for web
7. And.... - Photoshop CS6 offer to save my file in os My Documents AGAIN !!!
So, in fact it's real uncomortable!!! ...if I save different files for web frequently ....I need every time change My Documents....it makes me nervous.......Here - compare with CS3: CS3 remember "old" folder location even at another session (for example - after reload os)
Is there any fix this problem?
p.s. Testing on:
OS - windows 7 64 bit
cs6 - 64 bit extended
cs3 - 64 bit extended
Haven't had this issue until today (after I installed the recent patches)
I created an image 3.004" x 2.0"
I go to print, select my plotter, select print range "selection", go to preferences>advanced, set my paper size to PostScript Custom Page Size, make my paper 3.05x2.05 for a little extra boarder. Back in Print I set my Layout to Preposition to Center of Page which un-greys the position options and now it tells me my image size is 5.1"x2.0 and the Print Preview is showing the center of the image beginning at the left edge of the page...
Mind you, this is the same style of setup I've done numerous times per day for the past 5 years with x6 and x4...magically today it does not center my select graphic to the center of the page. If I put the graphic in the middle of the workpage and tell it to position as in document, it is not an issue, but if the graphic is else where on the workpage, it refuses to center..
Is it possible to setup inventor to print (for example) to BY DEFAULT print A size in letter format, B size in 11x17 ect?
----------------------
Inventor 2014 PDS
I try Xara Designer Pro X9 and use PDF Export Options with selected objects for page generation (PDF Export Options).
After PDF export done page size is A4 with my rectangle drawing instead page size with my rectangle size. How can I export to PDF selected rectangle with rectangle page size?
I have just switched to using Xara Photo and Graphic Designer 6 for my graphics design needs. Is there any way to create a default page size so that no matter when the program is opened it will always open up to that particular page size?
I am used to working and creating on a full "blank canvas" or pasteboard, rather than using page sizes that Xara seems to prefer. Every time I open the program I have to return to page options to re-set all of my workspace parameters and it gets frustrating after awhile.
For example, my preferred page settings are as follows: Page Size=A0 (which provides me all white space to work in); Outer Margin=0in [8in is always automatically pre-set by the program]; and I always choose Landscape, but the automatic pre-set is always Portrait.
There should be a way for the user to control how the workspace appears each time the program is opened, but how to make my page settings "once" and then have those settings be the default from there on out. It's just time consuming to go into Options every time I open the program and have to re-set everything all over again.
Im not even sure if Illustrator is the program or if i should use Indesign but im trying to create a single folded wedding invitation and be able to print on both sides. i want the invitation to be 14cm x 14cm and like i mentioned open up like a card and print on the front and on in the inside. Can you pleasssseeee direct me to some instructions or tell me which program would be best to do this. Im guessing that since its smaller than an A4 page size then i will need to cut it down after printing. To be able to do this do i need to make the canvas the size of a A4 page and then put my size of the invitation on this??
View 2 Replies View RelatedI have a 5 section book which I need to print. I usually export to a PDF then re import into a single indesign document. Then use print booklet to print the book. My problem is that I need bleed on my pages so I have set my page size to O/S A4 (32*22.5) When I export to PDF the pages end up A4. How can I export so the page size remains the same?
View 15 Replies View RelatedI just upgraded to x5 and can no longer export a file as an eps and hold the custom page size. In x4 I could export as an eps to a custom page size of 2.5" by 2.5". Every time I try to upload the file it is seeing it as an 8.5' by 11". I am selecting page size in advanced tab
View 8 Replies View RelatedI am looking for a macro for nesting different shape panels to a specific page size. each panel must have a clearance of 5mm all around. and cannot rotate. must be stay within the grain.
View 2 Replies View RelatedI am currently preparing a brochure and need to have one page (of six) in DIN A3 instead of A4 like the others. But I find no possibility to change just the page I need into A3.
View 2 Replies View RelatedI have AutoCAD 2007 on my machine.I have made a dll using AutoCAD.NET API which does the task of plotting a DWG harness drawing to a pdf file.I specify the device name and the page size to be plotted in a AutoCAD.NET method SetPlotConfigurationName(ps,"DWG To PDF.pc3",papersize).It works fine as long as I keep on giving default paper sizes.But, when I create a custom paper size using the plot configuration editor which in turn produces a new .pc3 file and when I include the same as the device name in the above mentioned method,it does not work.It throws an exception as eInvalidInput.
View 1 Replies View RelatedThe color of the paper space outside of the page layout is a gray-white very bright that would not allow the white lines and white letters to be seen. I have looked at the Options dialog to see if that color can be changed, but I could not find the name of that area outside the per layout ( I have my paper layout to black, which is fine, but I do not know how to change the areas outside the paper). This bright color came with AutoCAD 2012.
View 8 Replies View RelatedI wanted larger page thumbs and find a setting in XaReg
As the attached screen shot shows, the thumbs are indeed bigger but the gallery width has stayed the same so that the large thumbs are clipped.
P.S. I would like even bigger page thumbs.
I set up a new page thus (I live in a country which uses metric units, so ...):
Drawing Units Setting18-07-2013 9-24-06 AM.jpg
Then:
Command: '_limits
Reset Model space limits:
Specify lower left corner or [ON/OFF] <0.0000,0.0000>: 0.00,0.00
Specify upper right corner <3.5000,2.7000>: 3.65,2.74
Command: C
CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 1000,1000
Specify radius of circle or [Diameter]: 250
Command:
and I get:
Range Problem 18-07-2013 9-36-57 AM.jpg
The circle was centred at x=1000 metres, y=1000 metres, yet it displays right down at the bottom left of my screen. Compare the radius of the circle to the distance from the centre to the origin - it's nothing like 1:4! Look at the coordinates for the cursor!
Zooming in and zooming out has no effect on the huge dimensions indicated by the coordinates.
I know this must be simple because it is not mentioned in any textbook or tutorial I have been able to find. Authors don't seem to think it is important, but it's driving me nuts! The question is this:
How do I set the page size and grid scale to something sane?
I am pretty sure that this scale problem is at the root of many of the other problems I am having. A14 is doing it's job faithfully but the display is so small that I cannot see what is happening !