File settings have been moved to the printer settings. Each time I go to printer settings and specify the paper (heavy glossy in this case) and/or number of pages to print...
I get only one page printed. Each time must reprint AND reset the paper type.
Settings are NOT remembered as Adobe says after clicking either the Done or Print button.
This is CS5 32 bit Extended v 12.0 on HP color laserjet 2605dn (duplex printer. HP only makes a universal driver now, this is the latest version on Windows Pro 7.
I used to have an Illustrator action that selected all shapes with a similar fill and stroke. But since actions are completely broken in Illustrator CC, I've tried getting used to the Magic Wand tool, which basically does the same thing. Except in order to make it only select shapes that have the exact same stroke and fill like I want, you have to select all the checkboxes in the Magic Wand palette and set the tolerance values to zero. I don't mind doing that once, but Illustrator keeps reverting the tolerance setting to 32 and unchecking every box except "Fill Color" every time I restart Illustrator. I even tried setting the panel the way I want it in each New Document Profile and saving the files, but that had no effect.
The quick color selector in the main toolbar (fill and stroke) always resets their thumbnail sizes whenever I quit Illustrator.
I use a 27" monitor and prefer large thumbnails in my fill and stroke palette in the toolbar - but is there no way to make Illustrator "save" the settings when I change it to large thumbnails?
Every single time I start AutoCAD 2013 my Properties Pallete's columns reset their size.
I've tried re-saving workspace to a new one. It won't work. It also doesn't matter if I open application using shortcut or by double-clicking DWG file.
i recieved a prom pic from my daughter and i was going to print it and frame it, but 2 things happend.
The first one was that when i tried to print it it said it was tooooooo big 40inx60in so i resized it to 8.5x11 and it got very blurry, after about an hour i figured out how to get it sharp again (by accident) and forgot how i did it DOH!!! It was some kind of compairson with 4 of the same photo and resizeing the file from 9.5M to about 400kb and actualy adding some blur.
The next problem is when i printed it, it was so washed out it looked like an old 70's poloroid but on screen it looks great. Now I've read the color settings section but i think i might have set some settings wrong [U]and i don't think i fully understand what i'm reading . I know there are settings to either let photoshop take care of the printing or let the printer.Personaly i think i would like to let photoshop do it that way any email's or photo's i shoot will have a common baseline. The printer i'm using is an hp psc 2410 and the camera is a minolta dimage7i, is this a good camera / printer. I'm in adobe rgb(1998) mode and i think i saw somwhere in the printer software to choose between adobe rgb or the hp printer.Do these have to match.
Put simply how can i print it the way i see it on screen
I know ....long winded but i try to give all the info i can
Experiencing problems with the dimension tool since upgrading to Corel Draw X6 at this end, which hasn't been resolved with the updates.
I work in mm. The system doesn't remember the default settings if I change my preferences for it to measure in mm via the customisation window or the toolbox as it used to in previous versions. When I open the program again or start a new document, the measurement default keeps changing back to ["] (inches). Sometimes, it will jump back to inches after I change the default to mm when I'm working on the same document.
Same problem seems to be happening with the other units of measure available as well.
Current workaround - the only time it seems to remember my settings is if I change the default to mm and then save a document.
I can fwd a video screen capture which shows the problem if that would work.
Mac OSX Snow Leopard 10.6.8 and Epson 3880 Printer version 8.64 incompatability issues - can't print with printer driver, can't get 'Printer Settings'.
I have an Epson 1400, and it was working fine this morning. I usually go to Print Settings to select my glossy paper. But just now, when I went to print, and tried to click the Print settings... button, nothing happens. I have tried using Software Update and installed the latest Epson Printer Software, and tested several other applications, and the printer is connected and working fine in those.
I am designing a Flyer, (PDF) in Photoshop and that will not be going for printing company but printed in a University in UK. What DPI / PPI? Normally for web i use 72 and for Printing company i use 300. But for home printing, i don't know.
Secondly, what about color. Will CMYK be good for home printing. I don't know exactly what printer it is going to be.
Photoshop 11 quis when I try to choose a media type from priner settings on my new macbook pro. I am using an Epson RU2000 printer, and do not have this problem on my old macbook pro.
The margins don't work and you have to enter all the parameters if you are printing multiple photos.
No matter what margins you enter, the utility ignores them. I need to CENTER a document on both sides of a piece of brochure paper in order to create a personalized greeting card. This program puts the document on the left - turn the page over, and the card does not match. I would have to cut the paper to size and then set up paper sizes for the printer. The other solution would be to make the document letter size and center the card on that. What a waste of time.
I used to get perfect prints on an HP 2600N Laser Printer just by using no color management. Now I don't. Also, if you are printing 2 photographs (or 2 sides of the card) you have to close the program, re-open the program, get the 2nd photograph and reset the margins and the printer specs. What a bother!
I don't know why you just can't put the 'no color management' back into photoshop (unless you are being paid by printing companes not to do so.)
To create a new template one has to go through the "Printer..." dialog to change the paper size. Unfortunately, the only way to actually SAVE the new settings is to click OK, which causes Lightroom to print the current image. In all other programs, the "Printer..." dialog is used only to adjust settings. In Lightroom it seems to serve as a "Print" dialog as well. On Windows this violates long-standing UI function guidelines embodied by pretty much all other software.
A concrete example:
I needed to create a new template to print on 8-1/2 x 11 paper. To do so, I created a new template while in an existing template for 8x10. This copies the settings to the new template, but one cannot adjust the cell size to anything larger than 8x10. So I went to the "Printer...:" dialog to change the paper size. However, when clicking OK on the "Printer..." dialog, to save the new paper size, Lightroom starts printing the current image.
What should happen is that the settings are saved and no printing starts. Printing should occur only when I click on "Print".
Unless I've missed something and there's a way to change paper size, color profile, paper type, etc. (all the things you can change on the printer driver's dialog) from within Lightroom without invoking "Printer..."?
When i take bw laser print from corel draw, the output is not pure black. I tried using the the 'Preserve Pure Black' setting in corel draw. But it turns out to have some adverse effect while converting image from one format to the other (like rgb to cmyk) bitmaps, the black shade on the image looked washed out in multicolor offset print.
what should i do now to get pure black output from bw laser printer without using the preserve pure black setting.
Is there a best setting for the mode, color settings, and color profiles when printing a grayscale vector illustration to a monochrome laser printer? I am making vector maps, and right now they are mostly black line and black text with only the K values in CMYK. There are some gray tones—for example water areas are 10% K, with no C, M or Y. Would it make any difference if I used RGB mode values at 100% (255,255,255), or a rich black in CMYK (such as 40C, 30M, 30Y, 100K)? I printed in K only at 1200dpi to a Generic Gray Gamma 2.2 profile, and it doesn't look too bad. There aren't many of the lines that are really jagged. I just wondered if there are better settings.
I'm using Mac OS 10.6, Illustrator CS6, and a Brother HL-5470DW monochrome laser printer.
unable to select "printer manages colors" in the print settings, manage colors dialog. The options are grayed out and the default is "color sync". This started yesterday with LR4 so I upgraded to LR5 and it is the same.
I'm running LT 2014 at Win7 x64 and have a problem with Xerox WF 6604 custom size paper settings.
Simply say when I change custom printer size at the printer's driver settings and confirm all dialogs nothing happend and LT use default settings. No dialog about new or temporary PC3 appear so looks that ACAD doesnt know about change at the printer driver?
This problem isn't continual but, for example, I printed something from the same dwg twice, but when third one change was set the very problem will appear and ACAD doesn't register changes.
In the Printer Settings drop down menu both Color Mode and Print Mode are grayed-out. This just happened I cannot think of anything I've done differently.
I'm using OS 10.6.8 and the latest Epson drivers for the 3880. I have re-installed both PS and the Epson drivers. If I print from Acrobat Reader everything seems to work fine, this only is happening in Photoshop CS5.
I have misplaced my Photoshop book and I have a project in which I need a tool and I can't remember what it is. It is a particular type of brush, I belive, that grabs the colors from the surrounding pixels to blend color. Does this brush indeed exist, and if so, where can I go about finding said brush?
I'm recovering from a crash and trying to install PhotoFrame 2.0 into PS7. Remember the problem?, the PhotoFrame wants to install in folder: Photoshp.exe (dropping the O because they were limited to 8 letters?. Newer os allows full name. I think Erik, you are familiar with the problem and the fix. But do you remember?
Hope some ones does. I did install the program in old PS5 and used Erik's technique of having plugins on C drive and making a shortcut to PS7's plugins but can't see to get the whole program to move over.
I choose black, make some text and accept the outcome.I then click in the file to do it again, and the text box color at the top reverts to white. CS5?
Found one more problem with Save For Web in Photoshop CS6.
Example:
1. New Document 2. Choose - Save for web 3. In dialog window Photoshop CS6 offer to save in - os My Document Folder 4. Ok, every time I don't really need to save in os folders - I save files to my folders. So, change folder ...for example to disc D 5. Create another New document 6. Choose Save for web 7. And.... - Photoshop CS6 offer to save my file in os My Documents AGAIN !!!
So, in fact it's real uncomortable!!! ...if I save different files for web frequently ....I need every time change My Documents....it makes me nervous.......Here - compare with CS3: CS3 remember "old" folder location even at another session (for example - after reload os)
Is there any fix this problem?
p.s. Testing on: OS - windows 7 64 bit cs6 - 64 bit extended cs3 - 64 bit extended
How come my page size keeps changing back to the default (Din A4), even thought I've changed it and clicked either 'done' or 'print', even on the very same document? How can I have Photoshop CS5 remember the page size and the other variants?
I'm currently using AutoCad Electrical 2010 and we just got a new printer. Is there any way to map all of my electrical drawngs to that printer without opening each drawing and selecting the new printer?
I just installed PSE 11 on my Mac (OS X 10.8.2). My previous version (PSE 6) would re-open all files that had been open when I quit the app last time, but this version always opens with a blank screen. I can't find any preference in PSE to affect this, and the overall Mac setting is set properly. How can I get PSE to remember what files I was working on?
how to change the printer associated with PSP or add another printer? I have 2 printers installed on Windows7 but the only one I get when I try to print from PSP is the wide format printer & no option to add another. Is printing from Windows Photo Viewer my only option?
AutoCAD Mechanical, using the <<VANILLA>> variant.
Click open icon. AutoCAD pops up the file open dialog box, in the wrong directory. I select the directory where my files are and open a file.
Then I click the open icon again. AutoCAD pops up the file open dialog box in the same wrong directory. I have to change directories every time I open a file. Yes, I have the directory I want set in the places. But that's never been how AutoCAD works.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014 Dell Precision T1650 Windows 7 Professional SP1 64-bit Intel E3-1270 V2 3.5GHz / 32G RAM Nvidia Quadro 2000, Driver 331.82 Space Navigator, Driver Version 6.17.7
