Photoshop :: Adobe Settings Vs Printer Settings
May 7, 2005
i recieved a prom pic from my daughter and i was going to print it and frame it, but 2 things happend.
The first one was that when i tried to print it it said it was tooooooo big 40inx60in so i resized it to 8.5x11 and it got very blurry, after about an hour i figured out how to get it sharp again (by accident) and forgot how i did it DOH!!! It was some kind of compairson with 4 of the same photo and resizeing the file from 9.5M to about 400kb and actualy adding some blur.
The next problem is when i printed it, it was so washed out it looked like an old 70's poloroid but on screen it looks great. Now I've read the color settings section but i think i might have set some settings wrong [U]and i don't think i fully understand what i'm reading . I know there are settings to either let photoshop take care of the printing or let the printer.Personaly i think i would like to let photoshop do it that way any email's or photo's i shoot will have a common baseline. The printer i'm using is an hp psc 2410 and the camera is a minolta dimage7i, is this a good camera / printer. I'm in adobe rgb(1998) mode and i think i saw somwhere in the printer software to choose between adobe rgb or the hp printer.Do these have to match.
Put simply how can i print it the way i see it on screen
I know ....long winded but i try to give all the info i can
software: adobe photoshop cs2
Card: nvidia geforce ti 4600
crt: compaq mv 940 17in regular screen 1024x768
Printer HP psc 2410
Camera: Minolta Dimage 7i
View 2 Replies
ADVERTISEMENT
Mar 23, 2013
The margins don't work and you have to enter all the parameters if you are printing multiple photos.
No matter what margins you enter, the utility ignores them. I need to CENTER a document on both sides of a piece of brochure paper in order to create a personalized greeting card. This program puts the document on the left - turn the page over, and the card does not match. I would have to cut the paper to size and then set up paper sizes for the printer. The other solution would be to make the document letter size and center the card on that. What a waste of time.
I used to get perfect prints on an HP 2600N Laser Printer just by using no color management. Now I don't. Also, if you are printing 2 photographs (or 2 sides of the card) you have to close the program, re-open the program, get the 2nd photograph and reset the margins and the printer specs. What a bother!
I don't know why you just can't put the 'no color management' back into photoshop (unless you are being paid by printing companes not to do so.)
View 1 Replies
View Related
Dec 1, 2011
File settings have been moved to the printer settings. Each time I go to printer settings and specify the paper (heavy glossy in this case) and/or number of pages to print...
I get only one page printed. Each time must reprint AND reset the paper type.
Settings are NOT remembered as Adobe says after clicking either the Done or Print button.
This is CS5 32 bit Extended v 12.0 on HP color laserjet 2605dn (duplex printer. HP only makes a universal driver now, this is the latest version on Windows Pro 7.
View 1 Replies
View Related
May 7, 2012
Mac OSX Snow Leopard 10.6.8 and Epson 3880 Printer version 8.64 incompatability issues -
can't print with printer driver, can't get 'Printer Settings'.
View 3 Replies
View Related
Jul 2, 2012
i've just updated to Photoshop CS5 on my Mac (10.5.8) and now my printer settings button wont work for my HP photosmart B9180.
View 1 Replies
View Related
Apr 28, 2013
A printer profile working perfectly in CS5 does even not appear in CS6. How do I fix this? (Windows 7 64 bit for CS5 and CS6).
View 10 Replies
View Related
Jul 14, 2012
I have an Epson 1400, and it was working fine this morning. I usually go to Print Settings to select my glossy paper. But just now, when I went to print, and tried to click the Print settings... button, nothing happens. I have tried using Software Update and installed the latest Epson Printer Software, and tested several other applications, and the printer is connected and working fine in those.
View 7 Replies
View Related
Jul 2, 2012
I've just updated to Photoshop CS5 on my Mac (10.5.8) and now my printer settings button wont work for my HP photosmart B9180.
View 29 Replies
View Related
Mar 16, 2013
I am designing a Flyer, (PDF) in Photoshop and that will not be going for printing company but printed in a University in UK. What DPI / PPI? Normally for web i use 72 and for Printing company i use 300. But for home printing, i don't know.
Secondly, what about color. Will CMYK be good for home printing. I don't know exactly what printer it is going to be.
View 6 Replies
View Related
Dec 1, 2012
Photoshop 11 quis when I try to choose a media type from priner settings on my new macbook pro. I am using an Epson RU2000 printer, and do not have this problem on my old macbook pro.
View 7 Replies
View Related
Nov 12, 2013
I subscribed to adobe CC - Photoshop I am not able to use 3D options as it is all grayed out Am I missing in any components to be installed
My PC has got latest nvidia graphics card.
View 1 Replies
View Related
Sep 28, 2013
To create a new template one has to go through the "Printer..." dialog to change the paper size. Unfortunately, the only way to actually SAVE the new settings is to click OK, which causes Lightroom to print the current image. In all other programs, the "Printer..." dialog is used only to adjust settings. In Lightroom it seems to serve as a "Print" dialog as well. On Windows this violates long-standing UI function guidelines embodied by pretty much all other software.
A concrete example:
I needed to create a new template to print on 8-1/2 x 11 paper. To do so, I created a new template while in an existing template for 8x10. This copies the settings to the new template, but one cannot adjust the cell size to anything larger than 8x10. So I went to the "Printer...:" dialog to change the paper size. However, when clicking OK on the "Printer..." dialog, to save the new paper size, Lightroom starts printing the current image.
What should happen is that the settings are saved and no printing starts. Printing should occur only when I click on "Print".
Unless I've missed something and there's a way to change paper size, color profile, paper type, etc. (all the things you can change on the printer driver's dialog) from within Lightroom without invoking "Printer..."?
View 4 Replies
View Related
Aug 16, 2008
I compare photos a lot. I usually zoom in 100% or more on a particular part of the photo that for example is in the middle of the image. However, as soon I press Ctrl-F6 to jump to another image, my zoomed position gets reset to the top left corner.
Is there a way to keep the place where you've last zoomed in even if you jump between windows within Photoshop ?
View 2 Replies
View Related
Jan 20, 2009
Designed a business card and want to print to Avery type sheet cards and can't find the Avery selection in my printer settings. Just learnig CD X3
View 8 Replies
View Related
Oct 26, 2012
Searching for my "spam setting" ?
View 5 Replies
View Related
Jul 12, 2013
I like the openness and ability to click my desktop behind the image I'm working on. I know how to turn it off, but how do I KEEP it off? Every time I close and reopen photoshop it's back on, and I saved my workspace to see if that would result in any changes but it didn't. Didn't ever run into this issue on CS6.
View 3 Replies
View Related
Sep 6, 2013
When i take bw laser print from corel draw, the output is not pure black. I tried using the the 'Preserve Pure Black' setting in corel draw. But it turns out to have some adverse effect while converting image from one format to the other (like rgb to cmyk) bitmaps, the black shade on the image looked washed out in multicolor offset print.
what should i do now to get pure black output from bw laser printer without using the preserve pure black setting.
printer : hp 1020
operating system : windows 7
corel draw version : x5
View 6 Replies
View Related
Mar 27, 2013
Is there a best setting for the mode, color settings, and color profiles when printing a grayscale vector illustration to a monochrome laser printer? I am making vector maps, and right now they are mostly black line and black text with only the K values in CMYK. There are some gray tones—for example water areas are 10% K, with no C, M or Y. Would it make any difference if I used RGB mode values at 100% (255,255,255), or a rich black in CMYK (such as 40C, 30M, 30Y, 100K)? I printed in K only at 1200dpi to a Generic Gray Gamma 2.2 profile, and it doesn't look too bad. There aren't many of the lines that are really jagged. I just wondered if there are better settings.
I'm using Mac OS 10.6, Illustrator CS6, and a Brother HL-5470DW monochrome laser printer.
View 5 Replies
View Related
Jul 21, 2013
unable to select "printer manages colors" in the print settings, manage colors dialog. The options are grayed out and the default is "color sync". This started yesterday with LR4 so I upgraded to LR5 and it is the same.
View 2 Replies
View Related
Dec 10, 2013
I'm running LT 2014 at Win7 x64 and have a problem with Xerox WF 6604 custom size paper settings.
Simply say when I change custom printer size at the printer's driver settings and confirm all dialogs nothing happend and LT use default settings. No dialog about new or temporary PC3 appear so looks that ACAD doesnt know about change at the printer driver?
This problem isn't continual but, for example, I printed something from the same dwg twice, but when third one change was set the very problem will appear and ACAD doesn't register changes.
View 9 Replies
View Related
Feb 23, 2012
Photoshop CS5 v12.1.
Mac OS 10.6.
I'm printing to an Epson R1800 printer.
Print. Choose Color Management. Choose Document. Choose "Photoshop manages color". Choose the correct printer profile that matches the paper I'm using. Choose Relative Colorimetric.
THEN, I click Print Settings...under the 4th drop downu I choose "Print setting..." again. Under "Basic" "color" and "Color settings" are grayed out as are some of the "Media Type" options.
Is this normal? The problem is my black and white prints are printing really badly. They have color tones. I've cleaned the nozzles on my Epson printer, done everything the print utility suggests. All the test prints look fine.
View 3 Replies
View Related
Nov 3, 2005
how I can to reset all the settings back to default settings...
View 3 Replies
View Related
Jul 18, 2012
I'm changing computers and need to transfer over my custom document output settings in Bridge but don't know how to locate them. I have several types of custom documents.
Using CS5 Windows on a Windows 7 computer.
View 2 Replies
View Related
May 2, 2012
I’m a long time Photoshop user but recently picked up LR4 to try to fine tune my workflow. I’ve noticed that after importing new files (RAW, I haven’t tried with jpg) into my library as I scroll through them (1-up, not in grid) the preview comes up and then after a second or so the WB changes to a much colder image.
Does LR4 initially preview at specific settings and then change to the individual image settings? Even if so, the final images seem very cool and I feel like I have to up the temp more than I should have to. My previous workflow was to sort in Bridge and then use ACR to import to Photoshop. I feel like I did much less tweaking of my WB this way. I feel like I’m starting from square one with LR4.
View 8 Replies
View Related
Sep 24, 2012
In the Printer Settings drop down menu both Color Mode and Print Mode are grayed-out. This just happened I cannot think of anything I've done differently.
I'm using OS 10.6.8 and the latest Epson drivers for the 3880. I have re-installed both PS and the Epson drivers. If I print from Acrobat Reader everything seems to work fine, this only is happening in Photoshop CS5.
View 17 Replies
View Related
Sep 3, 2013
Can Photoshop CS6 Camera Raw picture settings be synced with Lightroom 5 picture settings?
View 2 Replies
View Related
Dec 24, 2013
I'm having some problems with drawing paths in Illustrator. Everytime I draw a new path, this new path shows up in the standard settings. The 'brush defenition' turns back to 'basic' and the 'variable width profile' back to 'uniform'. It would save me a lot of time if I could change those standard settings into what I prefer.
View 5 Replies
View Related
Mar 31, 2011
When the 'up' arrow appears in a thumbnail and comes up with the message:
The metadata for one or more of these photos has been changed by another application. Should Lightroom import settings from disk or overwrite disk settings with those from the catalog?
What exactly does that mean? This seems to happen every time I export an image to PS (CS5) and return to LR. What exactly has changed? What settings are being imported if I choose 'import settings from disk'.
View 21 Replies
View Related
Apr 21, 2013
I have a question. How could I an install a printer to my Adobe PhotoshopCS6 for Windows? And also after the installation how could I scan anything thru the printer?
View 4 Replies
View Related
Mar 6, 2013
When I am in page setup manager and want to use the "Adobe PDF" plotter device, I can't set a paper size other than the standard one like letter, legal, 11x17 ect. I need to have the "Adope PDF" plotter to print a Arch D size paper but that selection dosent even show up.
I have troubleshooted all the usual supects, of going to properties next to the printer selection bringing me to the plotter configeration page, where in the device and documents tab I then proceed to the custom properties selection, where the adobe document properties page comes up and under the adobe pdf setting tab...I still cant change or find the Arch D 24x36 paper size under the adobe pdf paper size selection tab other than the standard seletions.
View 8 Replies
View Related
Feb 23, 2006
I installed and, when given a choice of extensions to associate with PSP, I selected all. However, later I changed my mind. Had to uninstall PSP and reinstall. This time, I did not associate .bmp or .jpg files. However, I noticed my .bmp icon had changed a little. Still, it worked OK, so I just let it go. Now, I used IrfanView to save a .bmp pic in .jpg format to My Documents. When I went to view the .jpg file, it has the window icon and I'm given the "Open With" option (have to pick some program to open it). I can't seem to get the .jpg files back to where I can just double-click them to open. **I hope I've explained this OK**
Anyway, since I have a legit copy of PSP 7.0, I can reinstall any time. Right now, it's still uninstalled, but I don't know how to get the .jpg files back to where they used to be.
View 4 Replies
View Related
