why 25.5 by 33 inches has become the default page size in Draw? It's set at letter but the ruler shows otherwise and the snapping function is totally gone.
This happened yesterday as I was creating a custom document- I wound up uninstalling the whole suite and reinstalling today and within half an hour it happened. (after editing a bitmap from within Draw).
Is there a way to set what the default page size when you start XP&GD 2013? It always starts with a page size of A4 which I never use. I have a custom template that I would like to set as the default page size.
View 2 Replies View RelatedI have just switched to using Xara Photo and Graphic Designer 6 for my graphics design needs. Is there any way to create a default page size so that no matter when the program is opened it will always open up to that particular page size?
I am used to working and creating on a full "blank canvas" or pasteboard, rather than using page sizes that Xara seems to prefer. Every time I open the program I have to return to page options to re-set all of my workspace parameters and it gets frustrating after awhile.
For example, my preferred page settings are as follows: Page Size=A0 (which provides me all white space to work in); Outer Margin=0in [8in is always automatically pre-set by the program]; and I always choose Landscape, but the automatic pre-set is always Portrait.
There should be a way for the user to control how the workspace appears each time the program is opened, but how to make my page settings "once" and then have those settings be the default from there on out. It's just time consuming to go into Options every time I open the program and have to re-set everything all over again.
I want new documents to open with a solid background color by default. I've opened a new doc, gone to tools>options>document, set the solid background I want, then check save options as defaults for new documents. But when I then open a new document, the background setting is back to "no background".
View 8 Replies View RelatedHow do I get X5 to open with a new blank page as default?
If I enable the welcome screen it asks me what I want to open but if I disable it all I get is a grey area and I have to go to the drop down file menu ans select 'new page'.
Zero point.JPG
When a new page or document is created, by default the zero point is set at the bottom left of the page. Is there a way to set it to another point like top left so that all new documents open with it set that way. (top left)
Haven't had this issue until today (after I installed the recent patches)
I created an image 3.004" x 2.0"
I go to print, select my plotter, select print range "selection", go to preferences>advanced, set my paper size to PostScript Custom Page Size, make my paper 3.05x2.05 for a little extra boarder. Back in Print I set my Layout to Preposition to Center of Page which un-greys the position options and now it tells me my image size is 5.1"x2.0 and the Print Preview is showing the center of the image beginning at the left edge of the page...
Mind you, this is the same style of setup I've done numerous times per day for the past 5 years with x6 and x4...magically today it does not center my select graphic to the center of the page. If I put the graphic in the middle of the workpage and tell it to position as in document, it is not an issue, but if the graphic is else where on the workpage, it refuses to center..
I just upgraded to x5 and can no longer export a file as an eps and hold the custom page size. In x4 I could export as an eps to a custom page size of 2.5" by 2.5". Every time I try to upload the file it is seeing it as an 8.5' by 11". I am selecting page size in advanced tab
View 8 Replies View RelatedI am looking for a macro for nesting different shape panels to a specific page size. each panel must have a clearance of 5mm all around. and cannot rotate. must be stay within the grain.
View 2 Replies View RelatedI am currently preparing a brochure and need to have one page (of six) in DIN A3 instead of A4 like the others. But I find no possibility to change just the page I need into A3.
View 2 Replies View RelatedWe use a custom page size of 12" x 16" most all the time. How can I create this page size and add it to the "Page Size" drop list?
View 4 Replies View RelatedI would like to know the default font height setting in coreldraw 12. I want font size in millimeter rather than pt.
View 1 Replies View RelatedMy default paper size in coreldraw is letter. I have to manually set it to a4 everytime i need to work. can i preset it to a4. how?
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
How do i reset the default line size to hairline? It currently defaults to .176mm.
Also, when i export to jpg the preset displays "custom" with cmyk color selected. My computer is having a hard time with designs of any size and takes forever to load the preview and export. When it finally loads the preview the design is not visible. if I select rgb color mode the design appears in the preview window and appears to load without any issues. I would like to make rgb the preset color mode. I have tried to select one of the default presets (high quality jpg) and save it but can't seem to figure out how to make it the default setting when i export to jpg.
I can't get the box to pop up where I can set the default size because I think I checked the box to not show it again. How to get it back?
View 4 Replies View RelatedPage No. font size change when save a cdr file from corel x6 to x5
see images
Download this image here [URL] ..........
My current photo editing software (Microsoft PhotoDRaw) has the ability to do this and wondering if I can achieve the same in CorelDraw X5 or PhotoPaint Pro X3. I just reinstalled both and need to start using them since PhotoDraw only work up till Windows XP and I use Virtual Machine to run it.
Here you go. If say I open a new project to any page size of my choice and import any image (any size) into the page. Is there a way I can automatically fit the page to the image size in either CorelDraw X5or PhotoPaint X3? That is, if my default page size is letter (8.5"x11") and I import an image that is 2.2"x5", can I automatically fit the default page to the fit the image at 2.2"x5"? Really very handy too. Can I also do the reverse image to paper size? If I can do either, where do I go?
I am using Corel draw x6 to build a new website for my company. I have tried everything I can find but after exporting to html The resulting web page does not fill the different size screens in the office.
View 7 Replies View RelatedI'm trying to set my default font size, Helvetica (Type 1) to 12 point. It keeps reverting back to 24 point.
I have to use Type 1 Helvetica and not that new "Helvetica Neuel T 55 Roman" because of standards for a magazine I work on. I though Open Type Helvetica (the real Helvetica) was included with CorelDRAW X6.
I have a few thousand images that I created using Corel version 12 and X-5
I have been using X-5 for about the past six months or so and when I have to open a hundred images and they open to 60% each time.
Is there a way to select all the image in a folder and have them open to 100% everytime?
Just wondering if I could change the openning settings in a batch.
How can I change the default text size? I can set the size to 12 pt in three different places and choose "save settings as default", and when I place the text cursor on the page, it goes back to 24 pt. Very maddening...
View 5 Replies View RelatedI can't see how to set my basic default settings that I have always used for:- artistc text: color, size, etc.- paragraph text: line spacing, etc.- graphic: color, outline, etc.
I even click "text properties" and nothing happens.
How is it done in X6?
My CorelMacros.CreateColorSwatch macro has stopped dumping the swatches into whatever blank Letter-sized document I have open (which is how it used to work) and instead it is creating a new document, at 4.25" wide x 7" high, and dumping the swatches into that. Using Pantone Solid Coated, but it's doing this regardless of what palette I choose.
There is no option in the Macro's dialog box to alter or even instantiate a page size, and I cannot find in the code of the macro where to set this variable.
How can I change the default point size of the numbers that the dimensioning tool generates? Right now it is defaulted at 24 pt. and i have to manually select and change to 10 pt all through my drawings.
View 2 Replies View RelatedI quite often need a separate ruler scale on each page of a multi-page document. The only way I know how to do this is to create a separate document for each drawing that requires a new scale.
I request that you add the ability to change the ruler scale on a per page basis within a single multi-page document.
I am using CDR X5 SP1.
Use merge for standard things like labels.Have a large ongoing project which requires
Lots of Excel data - eg: 6685.excel example.tifcolumns x AZrows x 300 upwards
All rows required to create a book of running information.
If I use a label type approach some rows have less data making the layout uneven (unsuitable for the project)
Is there a way to merge with a fluid result ?
Ie row one takes up 2 lines Row 2 takes up 5 lines Row 3 takes up 1 line etc
0728.excel example.tif
If it's a bug, then I cannot believe it wasn't caught before the release. So here it is. I simply put artistic text down on page 1. Select the text and copy to clipboard. Add a new page and paste the text. On my computer, the text changes from artistic text (as copied to clipboard) to paragraph default text left justified across the center of the page. It doesn't matter how much text I select, it always pastes on the new page as paragraph text left justified and across the center of the page.
However, if I select artistic text and any other object, copy and paste to a new sheet, it works erectly. Apparently, I now have to select text and an object to insure that the paste feature works properly?
Untitled-1.jpg
i often do a very big and complex mix of logos names and so on.
i´d like to know if ther is any hotkey on how to move any object or a group of objects from far on the page to the page border.
I've gone nuttier this time. I just installed Illustrator CS6 onto my MacBook Pro OS 10.8.2. I want to set up a default opening page but this time, it's not a clear path to do so. How do I set up an opening page with a new font, rulers, empty fill etc. as the default page without having to search for a template each time I open a new page? Where does the default page to go now? etc.
View 3 Replies View RelatedI need to modify the page setup of multple drawings and have it save that way so everytime I open the drawing the chosen page setup is selected.
I'm aware of being able to set multiple page setups in the publish screen, but that isnt a permenant change to the drawings themselves, and not what I'm looking for.
I need to design my first template using photoshop. the content area of the web site will be 980px ( width ) ..
I like to add border to each side ( left and right ) .. i seen many sits using background image that spans the entire screen and has left and right boarder added to the background , which effectively looks like border on each side of content area.
however, i was not able to figure what would be the best canvas size for this . as each site i looked at , background was set to different size ..
my main content will be in center of the monitor .