I wanted larger page thumbs and find a setting in XaReg
As the attached screen shot shows, the thumbs are indeed bigger but the gallery width has stayed the same so that the large thumbs are clipped.
P.S. I would like even bigger page thumbs.
My work PC says it is W7 64bit, Xeon E5504 2.0GHz ( 2 processors ) with 24GB. I am not sure how fancy that is but it sure has a lot of memory.
I have a 400 page, 13MB .xar
In XDPX8:
-------------
Scrolling the PageGallery thumbs was super fast.
Scrolling the whole document was a bit laggy but just acceptable ( not really ).
BUT the delay between clicking on a PageGallery thumb and that page being rendered was unacceptable ( ~15secs ).
So, unable to navigate at a workable speed, I gave up and split the document into several separate files.
In XDPX9 64bit:
---------------------
It's just the same. If anything the delay after clicking a page Gallery thumb is longer. So I guess memory was never the problem ?
Is there a method to move gallery tabs so that Page & Layer Gallery tab is first in line (at the top) of docked gallery tabs at the right of the screen? I can move gallery tabs, but cannot make Page & Layer gallery tab move to the top.
View 3 Replies View RelatedI'm used from XDP6 to having the P&L Gallery stay the size I set it to - whereas in XDP7, when I press 'Pages' to reduce the listing into page names only - the panel suddenly shrinks to the left, given that the names only occupy a small space. This bugs me, esp at it shunt the page I'm working on to the left by the same amount as well.
View 2 Replies View RelatedI'm using Xara P&GD 7. My Page & Layers Gallery doesn't show layers. how I can find and start using Layers tab?
View 2 Replies View RelatedEvery time I launch Xara, I want the page and layer gallery to be at "layer level" mode, however it is only showing it at "page level" mode. Is there a way to make it default to layer level? It can get pretty redundant to have to click on that page to open it every time.
View 9 Replies View RelatedIn version 9. How do I get the gallery tabs at the bottom, for a gallery pane docked on the right?
View 2 Replies View RelatedIs there a way to set what the default page size when you start XP&GD 2013? It always starts with a page size of A4 which I never use. I have a custom template that I would like to set as the default page size.
View 2 Replies View RelatedIn XP&G7, my "Selector" tool has become the "Page Size" tool and I can't select anything. It just changes my page size. What did I do??
View 9 Replies View RelatedI try Xara Designer Pro X9 and use PDF Export Options with selected objects for page generation (PDF Export Options).
After PDF export done page size is A4 with my rectangle drawing instead page size with my rectangle size. How can I export to PDF selected rectangle with rectangle page size?
I have just switched to using Xara Photo and Graphic Designer 6 for my graphics design needs. Is there any way to create a default page size so that no matter when the program is opened it will always open up to that particular page size?
I am used to working and creating on a full "blank canvas" or pasteboard, rather than using page sizes that Xara seems to prefer. Every time I open the program I have to return to page options to re-set all of my workspace parameters and it gets frustrating after awhile.
For example, my preferred page settings are as follows: Page Size=A0 (which provides me all white space to work in); Outer Margin=0in [8in is always automatically pre-set by the program]; and I always choose Landscape, but the automatic pre-set is always Portrait.
There should be a way for the user to control how the workspace appears each time the program is opened, but how to make my page settings "once" and then have those settings be the default from there on out. It's just time consuming to go into Options every time I open the program and have to re-set everything all over again.
Size of page differs in page size dialogue box to that listed in print options box. I changed computers and it works correctly in the second one in that the page size is the same in both boxes, but I still cannot get it to work in the original pc. Both the file and the printer are common. Reinstalling Xara does not work. It looks like it is not installing correctly, even though it appears to be.
View 1 Replies View RelatedI’m wondering if there is a rule-of-thumb that one can use to predict the approximate size when exporting a raw file in Lr to a jpeg file. For instance, would an average 25 Mb raw file convert to about 5 Mb jpeg with the Lr export quality set to 100? To about 3.5 Mb with a quality of 80? …
I know the size will vary, but when I am exporting a collection of raw files and I have set the max file size to a certain amount, Lr sometimes won’t convert all the images because I have limited the file size too small. I’d like to be able to get a handle on some sort of quality/file size relationship before I start the export process.
In Xara Designer Pro 7, when I have selector tool active and want to drag over a number of elements to select them the selector tool will change the size of the canvas (page). Is that not a bug? I used this way of selecting elements often, and it is not good for me with this new behaviour.
Is it a bug or is it a new setting which I then need to change?
issues with PageGallery and CS6? I have uninstalled and reinstalled PageGallery until my fingers are numb. Today I thought my version of CS5 was causing a conflict so I uninstalled it, uninstalled Page Gallery, reinstalled PageGallery and now have two different issues. The first is an error message that an exe disk can't be found (the download does't require a disk) and when I bypass that message and try to make a page from PageGallery, the error message is: cannot connect to Photoshop: class not registered.
View 2 Replies View RelatedDoes Xara Designer support the ability to change one object on for example page 1, and that the change propagates to all the same objects on all other pages? I'm doing a lot of web design work, so this would be quite handy, but I haven't found a way to do that.
View 2 Replies View RelatedIt would be nice if the Web Gallery in Lightroom and Bridge would allow an easy way to add a home page link to allow users & clients not only to see the Gallery but get an entry point into your main web site. Manual and a tad time consuming, but adding a small amount of XML/HTML it can be done.
When you create a Flash Web Gallery it created a number of XML files in the Resource Directory. Navigate to this directory and open the file called group.xml
Here is where you need at add a snippet of code and here is the example - not elegant but I am not a programmer. Look for a section called custom it will look like <custom> and under the <siteTitle> add the code highlighted in red. The http reference should be red but the formatting of this page will not allow
<custom>
<siteTitle>Sunol Wilderness</siteTitle>
<groupTitle>
<a href=" To Main Page</a>
</groupTitle>
<groupTitle> Here is the Group Title You Created....
Edit Arrgh the formatting of this page stripped out the link after the first ". so you will need to add your full URL including http and www of your home page..Now save the file and then upload the package as you normally would and at the top of the page of your Flash Gallery will be the link you inserted.
As I said not very elegant but it does work.they will add an input box to the Web Gallery Creator.
After upgrading to Extreme 5 I cannot make animated segments. Is there something else I need to install? The Frame Gallery is grayed out. On my previous version it was always available whenever I opened the program.
View 2 Replies View RelatedI'm trying to add a new layer to my graphic and when I go to the Pages/Layers Gallery, there are no options for layers. Am I missing something? I'm using XDP X.
View 3 Replies View RelatedCan I remove the "arrows" when i move the Gallery?
View 4 Replies View RelatedI have an original copy of Corel Xara that I purchased many years ago.
On the disc is a huge amount of clip art and other items, I tried to incorporate these into the Designs Gallery but whilst I could get the graphics to work I could not get the images to show in the drop downs against the icons in the designs gallery. I just got a grey blank panel with the graphic name. This means that I still have to search through the manual to find a specific graphic.
Fortunately I also have the 500'ish page manual (approx 100 per page) for the clip art/symbols/fonts/etc..etc.
I may not use many of the graphics but it would be good to be able to install selected images with the pictures.
Today, I've been mostly trying to get the Cloud Gallery 2 widget to work as advertised. According to the instructions, once the photos I want to use are in place I can -
'Set text shown when mousing over the image using the caption field on the image tab of the Utilities > Web Properties dialog. Do this for all images.'
I've done this, but all I can get to appear is the main title of the widget itself. At no point can I get individual captions to appear describing the graphic.
I know I must be doing something wrong but I've never had this problem before. I am trying to place a line on my worksheet by dragging it from the line gallery. Nothing happening. I can select it and see it drag, but as soon as I release the mouse button it disappears. Also tried using the "apply" button on the gallery.
View 3 Replies View RelatedCurrently running designer Pro X, I am finally getting around to trying to build or add additional bitmaps to my gallery so that I can customize my graphics. I cannot find, the bitmaps Gallery on my original install disk. Where can I find quality bitmaps to add to my gallery? Once I locate either a complete file and/or a single image how do I permanently added to my gallery file so that when I launch Xara the bitmaps will be available any time I want to use them as a fill from the paint menu?
View 2 Replies View RelatedI recently purchased Designer Pro 7 after a trial period. During the trial, I had the default brush gallery, and had also downloaded some additional brushes. After downloading the content pack earlier this week, my brush gallery disappeared. The only brush that is available is the "normal line". All of my "galleries" are checked in the Utilities menu. How to get the brush gallery back?
View 2 Replies View RelatedI have clipped a photo to remove the background and now want to replace one of the images in a website gallery. I know I can delete the original image and replace it but is there a way I can drag my new picture over the old one and replace it like I can when I drag an image from the Bitmap Gallery?
I presume it isn't possible as the original image is a square or rectangle that is filled with the bitmap and the clipped image is an irregular shape.
I am using XDP 6
The color gallery allows me to change the sort order of the palettes. How do I make the new sort order "stick" so I don't have to re-do it each time I reuse the gallery?
View 1 Replies View RelatedIf I have some new fonts , how can I install them in fonts gallery whithout installing them in the system fonts folder ?
View 9 Replies View RelatedI recently started a tumblr Blog account. Still having some problems configuring it. I created a new page in tumblr and would like to embedd a picture gallery out of Lightroom. There are some nice html presets in Lightroom, but I cant get them into tumblr. I now installed a tumblr plugin (Jeffrey Friedl), but it only let me upload a picture onto my main tumblr page. What I want is to export a HTML gallery preset not on the main page of tumbler but on the "sub" page I have created.
View 3 Replies View RelatedIt's not a biggy or even a buggy.
But where has the rightclick>replace bitmap function gone?
Now one needs to go through the menu>import and adding through the bitmap gallery or fill gallery adding a folder again.
For me dragging from win explorer doesn't work.
At least not adding it to an object,only adding a new photo to the page
I have created a simple animation with 6 frames in the gallery. I want to link each individual frame to different websites. So, as the animation on the site is changing, you can click on one frame, and it takes you to one site, or you click on the next frame and it takes you to another site.
View 2 Replies View Related