Photoshop :: Brush - Preset Density That Works Like...
Aug 21, 2009
I'm unable to find a brush option for using a brush to change the density of an existing density to a preset density in the same way color fil is used to fill a tone. An example of the use would be...a shadow or reflection on a 255 white background; when the brush with the color or shade is used to paint over the background, it fills only the shadow/reflection in with the preset density. Thus allowing you to have the same exact color/density for all shadows/reflections. This is how the color fill or color setting in brushes works only that doesn't change density, only color/tone.
View 1 Replies
ADVERTISEMENT
Nov 27, 2012
Making registrations more opaque in film positives.
View 1 Replies
View Related
Dec 30, 2012
My platform is WIN 8-64 on a Dell XPS8500 with AMD Radeon HD 7570 graphics card and like many others I have the "flicker" problem but the work-around Advance setting of BASIC works for me. However, I now notice that I cannot set the brush hardness level. I installed the CS6-32 version concurrently and the brush works fine in that version. In CS6-64 the brush set on black will not replace white and when set on black it makes only a gray streak no matter what the hardness setting is.
View 5 Replies
View Related
Mar 6, 2013
Can you save custom brush presets in CS6 for people in lower versions to install and use?? So far hasn't worked... error compatibility message. I've designed all of these things, and now only those with CS6 seem to be able to utilize!
View 6 Replies
View Related
Mar 13, 2009
Brush Preset in CS4?
I selected a shape and when I go to Edit->Define Brush Preset...
it is grayed out.
I tried to go to the brush palette as well and it only lets me redefine a
brush, not create a new one.
View 4 Replies
View Related
Aug 23, 2006
i'm trying to make a new brush from a scanned photo. now i've done this before, and never had a problem, but it seems that with this particular picture, i can't. i've selected it, erased the background, turned it to grayscale etc.. looked in the tutorials, help, in many many forums.. i made sure the feathers were turned to 0, and the option "define brush preset" remains untouchable.
View 4 Replies
View Related
Dec 5, 2012
My brushes are installed here: [URL]...
I can't seem to find any other location that would be causing this issue. It's only happened since I installed CS6.
View 3 Replies
View Related
Oct 30, 2012
how to change the numbers to the brush name in the brush preset picker?
When you hover over a brush in the picker you get the name of the brush. I think it would work better if the numbers were replaced with the name of the brush.
View 3 Replies
View Related
Feb 24, 2013
I'm using Photoshop CS5 on a MacBook Air running OS X 10.8.2...I have managed to change the brush in my quick selection tool, or at least the way it looks on the screen, and I can't figure out how to get it back.
It now looks like a paint brush with light rays around it instead of the circle with the plus sign in the middle. It does not change size when the ] key is hit.
The current preset says its Quick Selection Tool Hard Round 250 1...In addition when I use the marquee tool I can not see the crosshairs when I am inside the image.The only thing I have knowingly done is to create a preset for a dashed line and imagine in doing that I have messed up the other. I have also changed the preferences for the cursor back and forth between standard and precise but it doesn't seem to make any difference.
View 1 Replies
View Related
Jul 11, 2012
can't find the star in the brush preset picker
View 12 Replies
View Related
Feb 16, 2013
I've done it before in earlier versions and I assume it's in the same place but where is the option to rotate a brush in CS6, I have to many layers to deal with transform after applying I know it's here somewhere?
View 9 Replies
View Related
Apr 25, 2013
I've loaded a set of brushes I created into CS6. They show up fine in the menu bar brush window, in the Preset Manager, in the Brush Preset palette above my layers palette, but they will not appear in the brush preset fly-out window. This is where I do all the manipulating of my brushes, of course, so this is essential. I have created many, many brushes and done this many, many times and have never had this problem.
View 1 Replies
View Related
Feb 1, 2013
I downloaded the trial version of Lightroom 4 onto my Macbook pro and when I try to use the adjustment brush the cursor that normally turns to a brush when you hover any part of the photograph only changes at the very edges of the picture. When I move the cursor towards the center of the photo the cursor changes back to an arrow and I cannot make any adjustments. If I start an adjustment at the edge of the photo I can drag it into the center of it, but I cannot release and then do any further painting in that region. At the point where the brush icon changes the cursor becomes a small arrow that points to the edge of the frame and if I hold down the left mouse button and move to the transition line it becomes a double facing arrow, I can then drag the area I can work in to make it even smaller, but I cannot increase the area.
View 1 Replies
View Related
Apr 10, 2012
The spot and healing brush seems to work a little, but then leaves dark smudges or even complete dark lines. Also seems to pick up other objects in the picture as if it is copying a section of the picture. Have tried to reset, but nothing works.
View 8 Replies
View Related
Oct 2, 2012
I am sure that in the past Texture settings saved when I loaded a saved Art History Brush tool preset. But suddenly, the Texture setting - specifically Depth, is not being remembered. In other words - I have saved an Art History Brush as a Tool Preset. I have then used some other brushes and experimented with texture including the Depth setting. When I go back to the saved tool preset, the Texture Depth setting has changed to whatever it was when I last used it - not its saved value. I thought the point of Tool Presets is that they save all brush characteristics.
I'm using CS6. The tool presets and their Texture attributes work fine in CS5. Maybe I need to reinstall CS6.
View 1 Replies
View Related
Jun 4, 2008
When using a hard-edged brush (round in this case), and using Shift+click to draw a continuous segment, the segment isn't perfectly straight at top and bottom. I know this is because of the "spacing" value of the brush, so the question is... can you make a global change for ALL brushes to have a spacing value of 1%?
View 4 Replies
View Related
Nov 26, 2008
trying to create a signature brush for signing my work in cs2.
I have done everything you are supposed to do but after I marquee my free form signature and text I cannot define the brush preset under edit. It is greyed out.
View 3 Replies
View Related
Jan 25, 2014
I'm using a Wacom Intuos2 tablet with GIMP 2.6.12, and it works fine except as the subject says, the eraser works like a brush. In Photoshop, I don't recall exactly what it does, but I believe switching to the eraser (meaning flipping the pen over to the "eraser" side" switches from the foreground color to the background color, so that it effectively works like an eraser.
How can I do that, or something similar, in GIMP? I've searched everywhere and most of the posts have to do with getting the tablet recognized (check) and implementing pressure (check).
View 2 Replies
View Related
May 31, 2013
Why is there a 'lightroom video preset' under the preset tabs. yet when i open a video file in lightroom and go to the develop modue it says video is not supported in the develop module?
View 2 Replies
View Related
Sep 28, 2013
I recently was working with a few files and found that the density and feathering settings cause my files to crash when I use them as selection. Most recently, I had a raster mask at an density of 60%, and I selected that as a marquee, inverted it, and then selected a different mask and deleted it from the mask. Basically trying to isolate an area for masking. The second mask I applied was applied to a group, everything up to this point saved fine. But once I selected the mask, inverted etc. I tried to save and immediately photoshop became unresponsive and would crash. Is this a known bug? It's really frustrating, that the mask properties have lead to issues like this.
View 6 Replies
View Related
May 27, 2013
Why image looks ligth in PE and dark in Bridge SC5 and in other applications.
View 2 Replies
View Related
Apr 16, 2013
Is there a way to increase / decrease the mesh density of a 3D model in Photoshop CS6 for export? I've searched within PS and on the web, and I'm not finding any way to do this.
View 2 Replies
View Related
Dec 19, 2012
In Capture One 6.3.4, my backgrounds read 253-255. When I open the RAW file in Camera RAW 7.1, the background reads 241-245. Profile is the same (Adobe RGB).
View 1 Replies
View Related
Sep 6, 2004
I will submit the Black and white ad created in Photoshop to the magazine. The requiment is that for grayscale images, the shadow density should be no darker than 90% and highlights should be no lighter than 3%. I don't know how to check the percentage on the document I made. I checked HELP in Photoshop and website. But I couldn't really get answer from them. I have little knowledge of printing. Please give me advice or helpful website.
View 2 Replies
View Related
Dec 16, 2005
i'm using PS CS and I want to fill a selection with a pattern but i'd like to simulate a light source.. so i'd like the pattern to fill with a varying density -- like stippling..or cross-hatching. i'm doing a 2-color (black and white only) t-shirt design so i can't have any gradations of colour. this may be a loaded question.. so i'm just hoping to get pointed in the right direction. if u need me to be more specific let me know.
Would illustrator be better suited for this task because i also have access to ai cs. even if not.. can someone recommend a good illustrator forum that is comparable to this mb? and maybe for Flash too.
View 3 Replies
View Related
Jul 5, 2009
Have used 6 versions of Elements and then moved to CS3 2 years ago. Have printed 100's of large format images using HP Photosmart Pro 8350 and 8750 printers. Results have been excellent with CS3 set up to let printer manage color and at printer color management level the setting is colorsmart/sRGB which is HP's default for printer managing the color. Installed Design Premium last week and significant differences from monitor to preview of print image. Print test results are all too vibrant and dark-muddy.
I changed about every setting I could in both CS4 and the printer to find a match up. I wrote every single one down for reference. I then reinstalled CS3( removed when I installed Design Premium). CS3 had the same problem now ( No I have not reinstalled Design Premium yet) CS3 is removed and I am  back to square one. I know the monitor set up is perfect as I have access to a very expensive spectroradiometer and the calibration including gamma is dead on. I then experimented with bringing up an image to print using a very routine editing program named Microsoft Digital Image Suite. The preview was perfect as well as the print( on both printers using the settings listed above).
Did a lot searching on the internet for a similar problem. Found none with HP printers but did find several instances with Canon printers( too vibrant too dark) but could not find a resolution. I am really open and appreciative of any suggestions. I don't care if I have already tried them. I will try again. Oh I also reloaded the printer drivers on both printers, no improvement.
View 2 Replies
View Related
May 2, 2013
When I load up the neutral density gradient maps, the bar shows the correct color gradient, but the layer is showing all black.
View 4 Replies
View Related
Aug 9, 2013
How can I measure the density of Red and Blue colors of an image?
View 4 Replies
View Related
Mar 17, 2014
It is possible to adjust in Photoshop the size and density of a tool when using shorcuts (ALT + right-click and various mouvement of the mouse or stylus).
Is there anything similar in LR5 to avoid permanent back and forth to the menu.
View 1 Replies
View Related
Sep 5, 2012
im stuck on an assignment, below are the instructions.
Row 2: Use L_15:red
- Starting with the right side of row 2, connect midpoints of the cell with a line to form a rotated square dimond (which i did)
- Next offset each visible line segment 8' ft. in all directions till all areas are filled with the pattern trimming and filleting as requred to define each as in row 1.
- The next square in the row, sub-divide the inner square by drawing lines from the midpoints to form an inner sqare, the offset 4'ft. in each direction maintaing the new areas created and fill as before to define the areas. Remember to use the same logic as in row 1, fill all areas defined by red line boundaries.
- the next square in the row sub-divide the inner aware by drawing lines from midpoints to form another inner diamond, then offset 2' ft in each direction as in previous operations.
- continue this logic of sub-division and density till you finish the second row.
- when you finish you should have a row of 5 squares movies from tighter density to lighter density of lines from left to right.
i got past the 2nd cell, sort of stuck on the 3rd, 4th, 5th (going from right to left) how the next three cells would look like (on the second column)
View 0 Replies
View Related
Jan 13, 2014
I have some files that were originally edited in LR3. They appear in my LR5 library, but with the old LR3 density tools (i.e. 'fill light' and 'highlght rescue'). How to I switch to the LR5 density mode (i.e. 'shadows' and 'highlights')?
View 1 Replies
View Related
