I have two documents, one with a larger canvas than the other. If I bring a layer from the larger document to the smaller one I end up with artwork that is off the artboard/canvas and invisible. I can see this artwork if I drag the layer around.
Is there a way to remove this content which is unused/unseen? I get the feeling that it is bloating my file sizes...
In Recolor artwork is there a way to change the black and white colors to a color? When I try to edit them it doesn't edit them at all. It would be nice if I didn't have to manually tweak the colors to have color before I go into Recolor Artwork.
View 2 Replies View RelatedI'm running a copy of Photoshop CS2. Basically just using it for glorified paint for a board game im putting together for friends. I'd like to define some points which the mouse snaps to, so I can draw circles and lines with their centers or ends at the same place, so I don't have to keep nudging over to the center pixel by pixel. I'll be drawing some angles, so a compass would be helpful too.
maybe Im using the wrong software. If, perhaps, you know of a better tool for what I'm doing,
Im tryin to edit my Invision Board Logo..
View 9 Replies View RelatedI am makeing an image for a customer. I am looking to take some text that was made on one art board and move it to another where I am assembling the complete image. However when I drag from one art board to the other the size of the cut and pasted art changes and the look of all its effects change as well.
The two documents have the same deminsions and the same resolution and color profiles. why this might be happening? Here is an example:this is the original
this is after I drag it or I cut and past it into another documentI am using photoshop cs5 on mac os 10.6.8
Just loaded cs5 onto a second computer legally. Any tiff or raw file brought into cs5 appears as a grey and white checker board image. From there its gets even crazier. CS5 works fine on the first computer. both loaded from the same legal disk.
View 1 Replies View RelatedBetween the graphic design showroom and the show board?
View 2 Replies View RelatedAnd everytime I change my brush settings in photoshop. it doesn't change anything. Everytime I turn off Shape dynamics the minute my pen touches the board it turns on!
View 2 Replies View RelatedPSCS6 shows the Clone tool transfer images so it is using Open Gl from my NVidia g610 graphics card but in "preferences" it shows no detected graphics processor in the performance window and therefore I cannot access the Hue wheel.
View 72 Replies View RelatedI just bought a GTCO Calcomp Drawing Board VI. I tried to set up but so far I can only use it like a mouse. I am working with AutoCAD 2007. In Tablet Works Control Panel, I set it to both Mouse and Wintab. The Drawing Board come with a wireless Stylus Pen. I did configure the tablet but I couldn't turn Tablet ON since it requires Calibration digitizer.
View 9 Replies View RelatedI'm working on skateboard model at the moment and struggling to curve the board. What applications shall I use.? Mesh is too complicated .
View 7 Replies View RelatedWe are having a problem related to paste clipboard. We are extracting block attribute to MS access file using VB.net. While extracting block data, all block object in paste clipboard is also exported to MS access file. How to clear paste clip board using VB.net before exporting block attribute data. We want to extract block object existing in drawing only.
View 3 Replies View RelatedWhen I try and move my image out of the little grey and white checker board area I can't see the image and can't see my "flipped" portion of it.
How to I get the flipped image to show without that stupid freaking grey and white cheacker board showing up!!!!!
Is there a way to make a cool circuit board look?Or even make it look like tron?
View 1 Replies View RelatedSo I have this multipage document I am working on and I needed more pages so I added the artboards I need however then now go beyond the clip board size (see picture below), how do I change that?
View 5 Replies View RelatedI find myself using Black Backgrounds often in illustrator. Bleeding a Black BG makes it impossible to see the art board boarder.
The solution to this has been for me to either place guild lines on these guide lines (silly really) and jarring. specially when you already have guide lines there.
Or to make a new layer, place a box on the board and give it a outline .5 stroke thinkness or so depending on the zoom because white on the black line thats above it screws up visually depending on the distance you zoom out from.
Or has Adobe given us a choose your colour option i don't know about? 50% Grey would be great. can see on white and black.
I am facing autocad-2014 error is "copy to clip board failed" entire drawing getting same problem,one particular file giving problem.
View 1 Replies View RelatedCan't get my calcomp tablet drawing board III to work properly,
I have xp pro - sp2 - tabletworks 7.46driver - autocad2007 and my 16 button puck macros dont work after editing main cui?
I want to edit a lot of videos of board and cards games for YouTube. I would like to add an overlay that displays the current score for each player. Here is an example of what I'm looking for: [URL]....I am an experienced AE / Premiere user. I know how to add and animate typography for short clips. My question is what the fastest and most efficient approach is for longer videos. The videos are up to an hour each. The scores change every minute. I don't want to be twiddling with keyframes. How to set up an efficient production workflow for this?
View 9 Replies View RelatedUsing PSPPX3 Ultimate.
The idea is probably a graphic design idea. I think PSPPX3 can do it though.
What I want to do is create something like a flyer or poster. So if it was physically I would have some poster board or a large sheet or paper, then I would arrange images and tape or glue them to it. Then scan and print off any copies if I needed them.
In software I think I want to be able to create a background and be able to enlarge it or shrink it down as I need to. Then start applying images and resize or reshape them on this "virtual canvas" or outside of the "virtual canvas" and bring them into the "virtual canvas".
Can this program do it, or do I need something like CorelDraw?
I am trying to create a hatch for board and bat siding. There are parallel lines at 1.5" apart that repeat every 8". When I try to use the hatch I get the following message:
Bad pattern definition file:
Missing parameter on line 8.
90, 0,0, 8
Here is the code;
*Boardbatt8
90, 0,0, 8
90, 1.5,0, 8
The file name is boardbatt8.pat
coming from CS3 to CS6 I would like to input artboard size and add crop marks to the board. Is this gone?
View 6 Replies View RelatedI am deciding to switch over to gimp from pixelmator because of the extra features. However, there is one thing that is making me concerned is some limitations in the filters.
How do I create a checkerboard pattern (using the filter) which has a green color for its primary color and transparency for its secondary color? In pixelmator this is easily done because there are extra color pickers in that filter supports transparency, so no problem. However, this isn't the case in gimp.
My kids' PC's motherboard failed. I was fortunately able to access all data on the old HDD and copied it to my machine. I have to replace the motherboard, CPU and memory. Everything is working OK again.
My son's library files were all in his "My Pictures" folder of which I have a copy. What is the best way of getting everything back without the need to import everything again. I do have a copy of "Lightroom 4 Catalog.lrcat" - I have a copy of the complete old folder.
way to create a gypsum board wall with the metal fittings inside?
I mean to have the fitting for example every 60 cm/ 25 in, and the metal frame on top and bottom of it.
Is there any similar wall in the ACAD architecture tools palette?
I am trying to model foam insulation around a circuit board, that is set in a fixture, in an assembly. Is there any tool that will allow me to do this? I am trying to avoid modeling a seperate part with complicated geometry.
View 3 Replies View RelatedI need to insert gypsum board and wood siding and insulation into my drawings.
View 1 Replies View RelatedI just got a new computer (Windows 7) and I don't like the default "Paint" program that comes with it. I've been using the Windows XP paint program for a long time and Paint.Net was the closest thing I could find to it.
I don't use Paint to edit photos or create super detailed artwork. I use it to draw little things (the image size is usually 50x50 or 100x100 pixels) and zooming in to 400%-800%. I've used paint.net a few times but I was wondering if there was a place in the program that would let me set preferences. It would just save a little time making it more convenient and less frustrating.
These are the things that I would like to change:
1: When moving a selected item it automatically leaves a "checker board" pattern on the image. It's relatively easy to fix with the "Paint Bucket" tool. Though if there was an option to make it only leave the default area white it would be a time saver.
2: When moving a selected item it will automatically replace the image beneath where you place it. In the Windows XP program there was an option to either replace an image or to replace all other colors except white (255green+255red+255green on the custom color spectrum). Is there an option like that in this program?
3: After moving a selected image (using the "rectangle select" tool then the "move selected pixels" tool) is it possible to simply de-select the selected image without having to click on the "rectangle select" tool and right clicking? In other words, being able to move an image, deselect the image, then automatically return the tool to "line" tool?
4: While using the "Line/Curve" tool the 4 click and drag points automatically appear on it to make it "curve-able" so is there a way to just leave it as a solid line without those 4 selectable points appearing?
5: Is there a way that I can make "Line Tool" my default cursor instead of pencil?
I've been asked by a friend to create a CD cover and inlay for a his band, something I haven't done before (i've only done web-design until now).
I've been reading up online about how to create them and I've been getting nowhere, fast! I read that a CD cover should be 120mm x 120mm, but this appears to be HUGE on my small monitor screen and I have to zoom out in order to see what I'm doing!
I usually design for the screen (72) but lately i feel that if im putting massive amounts of time/effort into a piece.... that I dont want to deny myself the option of getting it printed down the road. Now here is the catch...my camera is only 2MP. So the best i can do with that is an 8X10 @ 150dpi which isnt much (its ok quality.....i have an 11X14 @150 hanging on my wall thats decent).
So now when i go to create a new piece i dont know what size to make it. I cant jam up the ppi to far cause i dont have that kinda quality photograph...but i dont want a small document set to 72 cause if i want it res it up i get an extremely small print.
Like 2 examples...one piece i have i made 612x792 (8x10) but its at 72..so if i wanted to print it at 150 (at best) it's going to be really small (4x5... if that). Now another piece i made is 1000x1294 @72 (a large 8x10). Now with this size my 1600x1200 photographs fit fine and if i res it up to 150 i can still achieve an ok 8x5.
So now what do i do. I cant make an 8x11 @ 300 ( i dont have that kinda quality) but i hate the fact that an image i put so much work into can only print like 3x4.
I created several business cards and other artworks in Photoshop cs5. I was wondering if Photoshop can generate a visualization of business cards (for example) like if it was a real PRINTED business card and place on table (like a real render)? if not, do you know any tool that do such thing for Photoshop work ?
View 10 Replies View Related