When I try and move my image out of the little grey and white checker board area I can't see the image and can't see my "flipped" portion of it.
How to I get the flipped image to show without that stupid freaking grey and white cheacker board showing up!!!!!
Just loaded cs5 onto a second computer legally. Any tiff or raw file brought into cs5 appears as a grey and white checker board image. From there its gets even crazier. CS5 works fine on the first computer. both loaded from the same legal disk.
View 1 Replies View RelatedI am deciding to switch over to gimp from pixelmator because of the extra features. However, there is one thing that is making me concerned is some limitations in the filters.
How do I create a checkerboard pattern (using the filter) which has a green color for its primary color and transparency for its secondary color? In pixelmator this is easily done because there are extra color pickers in that filter supports transparency, so no problem. However, this isn't the case in gimp.
I just got a new computer (Windows 7) and I don't like the default "Paint" program that comes with it. I've been using the Windows XP paint program for a long time and Paint.Net was the closest thing I could find to it.
I don't use Paint to edit photos or create super detailed artwork. I use it to draw little things (the image size is usually 50x50 or 100x100 pixels) and zooming in to 400%-800%. I've used paint.net a few times but I was wondering if there was a place in the program that would let me set preferences. It would just save a little time making it more convenient and less frustrating.
These are the things that I would like to change:
1: When moving a selected item it automatically leaves a "checker board" pattern on the image. It's relatively easy to fix with the "Paint Bucket" tool. Though if there was an option to make it only leave the default area white it would be a time saver.
2: When moving a selected item it will automatically replace the image beneath where you place it. In the Windows XP program there was an option to either replace an image or to replace all other colors except white (255green+255red+255green on the custom color spectrum). Is there an option like that in this program?
3: After moving a selected image (using the "rectangle select" tool then the "move selected pixels" tool) is it possible to simply de-select the selected image without having to click on the "rectangle select" tool and right clicking? In other words, being able to move an image, deselect the image, then automatically return the tool to "line" tool?
4: While using the "Line/Curve" tool the 4 click and drag points automatically appear on it to make it "curve-able" so is there a way to just leave it as a solid line without those 4 selectable points appearing?
5: Is there a way that I can make "Line Tool" my default cursor instead of pencil?
I've got an image sequence that uses white on pngs, once they've been made into animated gif the white turns less white and slightly grey, how do i remedy it?
View 8 Replies View RelatedHow to use the colorchecker passport with gimp and/or UFRaw and/or digikam for color correct images and use the profiles build out of the dng file.I just found workflows on how to use it with Adobe Lightroom or Adobe Photoshop 5 or so.
View 1 Replies View RelatedAlright, so I'm trying to import a checker pattern onto my drawing for clothing decoration. The first time I did it, no problem, but now when I try to import a layer it doesn't work the way I want it to. When I try to erase parts of it, instead of being transparent, it erases away white. (See attachment) How can I fix this?
View 1 Replies View RelatedIs there a way to change the transparent background view which is by default the gray checker. I'd like to make it for example blue.
View 2 Replies View RelatedI am trying to reduce the Opacity of some white text so that it looks faded. However I want the background that this appears on to be black. The problem is that it changes to grey the lower the Opacity.
I understand that this is because of the black background but can not think how to get around the problem.
I am useing CS2 and have created 6 layers but I can't get rid of the grey and white squared background in each layer.
How can I hide / delete this ?
i'm trying Photoshop CS4 and found out that Adobe changes many Shortcuts.
I often use the Selective Color und navigate between the Colors with CRTL+1 till 9. Now Adobe changed the Shortcuts to alt+3 (for RED) till alt+8 (for MAGENTA). Now my Question -how is the Shortcut for WHITE/GREY an BLACK?
I have a shot with a white background. There is some text that has to disappear somewhere into the white, so I figured, I'm just gonna load in a white color source, lay it on top, and put it in front of the text in z space. But nope, the white doesn't match the background white. It looks grey. I tried to apply a CC, but that doesn't change anything.... I already restarted smoke, but that didn't fix it either.
What else can I do?
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I've used PS for a long time, but I've encountered a problem recently. I don't really know when it happened but I suddenly noticed it. I use PS CS5 regularly and just downloaded a trial for CS6 today to see if it fixed my problem, it didn't
Here's my problem:
[URL].........
EDIT: Dunno, but the linking to the picture just seem to make a tiny thumbnail, copy paste the URL to see the bigger one.
As you can see, the overlap from grey to white when I use the gradient tool just suddenly breaks into a clean grey white border. I've never had this problem before. I have tried to see if I might use some wrong settings or color options, but I couldn't find anything.
My homepage is in the design phase and it contains a lot of grey colors, therefore this problem screws up my project!
I have a jpg with a white background, but when I place the image into my sketch the white background becomes grey.
see attached pic.
How do I get the decal to display the correct color?
I'm trying to insert a raster image by just, insert raster image. The image is a jpg. file and is in greyscale.
it is a logo. the logo is in black and the background is white.
When i insert and print it shows up alright but the parts that are supposed to be white print out as a light grey.
Still trying to learn my D7000
Yesterday, I took a number of experimental shots (a red phone cord lying on a white background). The white background (an artists white canvas lying on the floor) was well lit from above using 5600K lights.
The shots were all taken using auto focus, auto exposure, etc and in the view finder everything appeared to be correct, but on later viewing the photos, the white background appears to be grey.
I have attached a sample image to show the grey colour.
especially when using the auto mode when taking the photos.
I am not concerned about the picture quality only the grey background and I did not undertake a WB as I thought that this was part of the auto mode when taking the photo. the shot was taken by half pressing the shutter release butto to ensure that everything was OK then continuing to fully press the button.
how to use a MacBeth color chart to the X-rite color checker in GIMP?
View 1 Replies View RelatedI've got some insulation that is colored white and no matter what white I use or alter the views still show grey. 2011 didn't have this problem as white-flat looked white on screen.
View 1 Replies View RelatedI am trying to save a red and white and black logo to an eps file to use with a vinyl cutter but when it saves it changes it to a greyscale picture and the red color is removed. I tried resetting to factory settings and that didn't work.
View 2 Replies View RelatedI am trying to convert an object's color from black to white. Like changing the color of a killer whale's black coat to sumthin like green or blue.
View 1 Replies View Relatedi do not know much about color spaces. But I do know that different forms of media require using different colors (RGB, CMYK, all that stuff).
wrong color space or exporting formats.
What do I need to do to get the final video that I exported to look exactly the same (in terms of color) when it's uploaded on YouTube? Strictly just the color, because I understand quality goes down when uploaded to YouTube.
What I want to do, is take the path tool, make a pattern around a picture (which is rectangle) placing it on a picture of a board like this...and then pull the picture horizontally, and vertically, to make it circular, to fit the perimeter of the board. If I understand it correctly, when you use the path tool...it allows you to make an image round (from rectangular) is that true?
View 1 Replies View Relatedwhen I am working on a large drawing and/or pasting as a block, all the grey lines (colour 8) turn to white. When I select a grey line, it flicks back to grey, but de-select, and it's white again.
If I toggle on hardware acceleration, the problem is fixed for a short while, and also if I turn it off, it is fixed for a short while, and also if I save, close and re-open it's good untill I paste a block....
I suspect it may be because of my setup and an un tested graphics card:
Windows 7 64 bit Ultimate - running through bootcamp on a macbook pro
Autocad 2012 Lt
Machine Configuration
---------------------
Processor Speed : 2.2 GHz
RAM : 8103 MB
3D Device
---------
Name : AMD Radeon HD 6750M
Manufacturer : AMD
Chip set : Radeon HD 6750M
Memory : 707 MB
Driver : 8.17.0010.1063
Your machine contains a 3D Device that is not certified.
I'm trying to remove the blitz shadow from head and body on a white/grey background, with the Lasso tool. The adjustments with Brightness/Contrast in the chosen area works like a charm, however I always get a nasty pixeled or whitelined boarder going constantly around the edited area; no matter if it boarders to a black area (shoulder) or a gray one (wall behind person).
I've tried to edit the primary/secondary color, with no luck. Any way to make this boarder "blend in" to the new brightness area - or to just remove it? The edited area is somewhat identical to the old background, so there is no natural reason to why it should be a constant boarder.
Or is it a better (and easy!) way to remove blitz shadow from a black and white picture?
Okay so I'm trying to take the white background off of a picture using the select a color on white, but it takes out a lot or the fur and eyes(it's a picture of a cartoon cat) How can I remove the areas of can from the selection without removing the pieces of cat too.
It's creative commons, so I guess I can post screen shots...
The cat is from [URL]...
A general idea of the selected area
What happens when I take out the selected area
So how can I take the pieces of the cat out of the selected area so when I try to delete the background I don't get an invisible cat?
Sometimes I can't draw with any color other than grey
I'll see green (for example) as my foreground color. However, when I apply it, it turns out as grey
I can open up other files and the colors work perfectly. It is exclusive to this file. I pened this file in Ms Paint and it will only paint grey on this file as well.
Is the file corrupt or is this a form of copyright protection?
I created a logo and then opened it as a layer so that I can make a website header image. It is shown here [URL] and as you can see the background is an off-white colour. It is probably unnoticeable to many, but I would prefer to get it right. How can I make the background a pure white so that it blends in with the white of the wordpress theme?
View 3 Replies View RelatedI am trying to add a grey scale mask to a layer so I can alter some game files .But I must be missing something blindingly obvious. Here is how I create a mask in PSP6.
-First I duplicate the base layer.
-Then I adjust the saturation to -100%(grey). Then I adjust the lightness to +100%..This gives a grey scale image.
-I then increase the brightness by 25% and the contrast by 50%. This gives a grainy bright and high contrast grey scale image.
-I then create a mask and then add the mask to a blank layer.
This allows me to spray away to my hearts content and leaves the main detail on the original image untouched. By this method I can add mud effects to tank tracks in games and still see the original link details through the mud.
But I am having major issues trying to achieve this effect in gimp.At the moment this hurdle is stopping me getting to grips with gimp.
can I alter the BACKGROUND COLOUR from the Grey to a lighter grey as in P/Shop Album 2.00 which is just what I want..I hate the darker colour as background..I have just purchased the Elements 11.
View 5 Replies View Relatedas a user of pse 6 I 'm used to work with darkgrey background in the organizer.
This works perfectly for quickly assessing brightness and contrast of pictures.
In pse 10 however I could not find any button to change the preset lightgrey background colour to darkgrey.
I am currently running Map 3D 2012 with CadWorx and I am having an issue with one of my multi tab drawings. Any object set to plot grey (any grey), that is in paper space, is plotting black only in one of my layouts. similar objects in model space and in both spaces on other layouts are all plotting accordingly.
View 0 Replies View Related