I am trying to create a hatch for board and bat siding. There are parallel lines at 1.5" apart that repeat every 8". When I try to use the hatch I get the following message:
Bad pattern definition file:
Missing parameter on line 8.
90, 0,0, 8
Here is the code;
*Boardbatt8
90, 0,0, 8
90, 1.5,0, 8
The file name is boardbatt8.pat
I want to create a hatch pattern for vertical siding. Never had to create a hatch before so I'm not sure how to do it.
View 5 Replies View RelatedI need to insert gypsum board and wood siding and insulation into my drawings.
View 1 Replies View RelatedWhere do I save custom hatch pattertns in autocad? What file? Support? Do they have to be saved one at a timeor can they be saved in a folder?
View 4 Replies View RelatedI have added my custom hatch patterns to the .pat file and they aren't showing up. Is there a certain step I am missing in order for this to work? Is there an easier way to load my custom hatches in CAD 2010 that I am not aware of?
View 2 Replies View Relatedrecently installed Acad R2010 and I need to install new custom hatches but don't know how.... I got working with Autocad since 1990; probably it was R2.0. This is the first time that I try to do it, so I don´t want to mess the whole thing misplacing my .pat files.
View 9 Replies View RelatedHow can i create new hatch? In hatch option, user define hatch option is given. So how can we define the new hatch?
View 6 Replies View RelatedWith transparencydisplay=1 I create hatch with transparency (for example) 80%, I save file and I close it. When I re-open the same file hatch have transparency 0%. What's the problem?
View 9 Replies View RelatedHow do I create a new custom toolbar?
View 2 Replies View RelatedHow can I create a line type for a PID software signal using a dash line and a filled in circle dash line? I have tried to use the donut feature as a shape file and a filled in circle as a shape file to define my line and neither has worked. what I am trying to create for a line type.
View 3 Replies View RelatedI am facing autocad-2014 error is "copy to clip board failed" entire drawing getting same problem,one particular file giving problem.
View 1 Replies View RelatedCan't get my calcomp tablet drawing board III to work properly,
I have xp pro - sp2 - tabletworks 7.46driver - autocad2007 and my 16 button puck macros dont work after editing main cui?
So I am trying to create a TP that has a few commands on it... the problem is I dont know where to start in order to make everything available to the others on my network...
I have created a new GROUP, dragged a palette into that group, made my commands, and they work on my PC... but how do I get them all so everone can see them. Exporting the "command tool samples" and importing it as "My layers" works, but the name is still command tool samples and breaks the actual command tool samples...
C3D 2010
It is no more possible open Hatch Edit dialog with double click on existing hatch. Now, this way opens only Properties
View 9 Replies View Relatedway to create a gypsum board wall with the metal fittings inside?
I mean to have the fitting for example every 60 cm/ 25 in, and the metal frame on top and bottom of it.
Is there any similar wall in the ACAD architecture tools palette?
I am deciding to switch over to gimp from pixelmator because of the extra features. However, there is one thing that is making me concerned is some limitations in the filters.
How do I create a checkerboard pattern (using the filter) which has a green color for its primary color and transparency for its secondary color? In pixelmator this is easily done because there are extra color pickers in that filter supports transparency, so no problem. However, this isn't the case in gimp.
I have two, seemingly identical, installations of AutoCAD LT 2012 on two machines in our office. Both machines have the MEASUREMENT variable set to 1.
The acadltiso.pat file of both machines has been customized with the addition of two hatch patterns and both of these work just fine.
In addition, the support folders of both installation also have identical sets of custom hatch patterns. On one of these machines thumbnails for these are visible and all works entirely as expected. However, on the other machine, none of these custom hatch patterns appear at all. In fact I cannot even see the custom hatch pattern tab!
created any custom hatch patterns for Inventor , If so, how?
View 3 Replies View RelatedI'm trying to make a custom hatch using circles perforated metal, what that is but how to make a custom hatch with circles random circle holes on a sheet of metal. when i print out my CAD drawing the dimensions are gray and not very visible while the drawing is nice a dark and very visible.
View 1 Replies View RelatedI am trying to load hatch files from StoneCAD. In the past I have been able to take hatch patterns from various sources and locate them in a file within AutoCAD LT, then use them without issue.
I have never touched a .pat file or written anything in notepad or word, just simply copied the .dxf files to a file on my computer and was able to use them through AutoCAD LT 2009. Recently I had to reload the software and I can't figure out where I would go to put these hatch files.
I've not done custom hatch patterns in the past, but I'd like to create a custom hatch pattern using a block I have. Is there an easy way to do this?
Would like to make a 8" CMU (section) hatch pattern, as an example, to use in automated sections that I generate.
Pretty easy to see where I'm headed w/ this.
Any easy conversion tool or the ability to explode the block, select everything for a hatch pattern and click "OK".
Likely there isn't, but it never hurts to ask when starting out.
We are a firm using ACAD 2011 w/ a custom toolbar that has an Auto Purge "tool" it currently deletes duplicated layers, reg ops, duped scales etc. we are wondering what else it can do (or any other tools that may be of use) or how can we get it to do more for us, like restrict referencing files from "unwanted" locations and any other tools that are essential to reducing the size of a drawing so its now so slow
View 3 Replies View Relatedif i want to make a custom hatch which include with letters and some different types of lines. what is the process to make that type of custom hatches.
View 9 Replies View RelatedI am wanting to build an installer to deploy some custom hatch patterns. Getting the hatch patterns onto disk is easy; however, I need to add this location as a support path (presumably via a registry entry) but the number of potential registry entries is huge given the combination of AutoCAD releases and verticals. The other option I had was to deploy the hatches to the same location as ACAD.PAT and search for this location during installation.
FYI - I plan to use Inno Setup but am not opposed to another installer.
I'm trying to figure out how to create an iLogic rule that would create a Custom iProperties and put in what version of Inventor the file was last updated with.
View 8 Replies View Relatedwhen I create a pdf from my drawing some of the hatches change (simple line hatches will have a heavier line). it is fine in the dwg.
View 1 Replies View RelatedI am working on a drawing (not originally created by me) and cannot create any hatches at all. If I make a closed shape, select Hatch, and select an interior point, nothing at all happens. No hatch is created, no error messages are generated. The command simply appears to finish as normal but doesn't actually create anything.
View 9 Replies View RelatedMy ultimate goal is to have a virtual human model that I can re-size parametrically to reflect real-world measurements. I've used MAX to make architectural models and scenes so I know how to manipulate basic shapes in MAX.
how to make some sort of basic-custom geometric shape and control that shape parametrically, like the built-in "Box", "Sphere" and "Cylinder" objects.
My company have some custom menus and some some lisps that are related to it.
to install the menus in r14 first we opel tools/options/Files then we add the custom folders under the Support File Search path then we load the menu and open the Display screen menu and after all the commands can used under the screen menu.
this also work under acad 2000 but cannot find a solution under 2010
when i create a pdf my hatch changes in certain areas (linetype seems to get thicker) i am using 2007?
View 3 Replies View RelatedThe AR-Sand hatch is visible in a published pdf file, but does not plot.
View 1 Replies View Related