We are having a problem related to paste clipboard. We are extracting block attribute to MS access file using VB.net. While extracting block data, all block object in paste clipboard is also exported to MS access file. How to clear paste clip board using VB.net before exporting block attribute data. We want to extract block object existing in drawing only.
View 3 RepliesI am facing autocad-2014 error is "copy to clip board failed" entire drawing getting same problem,one particular file giving problem.
View 1 Replies View RelatedSo I have this multipage document I am working on and I needed more pages so I added the artboards I need however then now go beyond the clip board size (see picture below), how do I change that?
View 5 Replies View RelatedCOPYBASE & PASTECLIP Command not working
View 3 Replies View RelatedI am using ACAD 2000. My wblock and copyclip commands are not working only in one specific drawing. I am working in modelspace.
When I wblock it lets me select the objects and assign a file to save the objects to. When I hit OK it gives me no error but no file is created.
When I copyclip it gives me no error, but when I pasteclip, nothing happens.
I tried saving the drawing as something else. This drawing simply won't let me copyclip or wblock. I can use the copy command to make multiple copies of the object in question within the drawing. I tried restarting my PC and this particular drawing still has the same problem. Other drawings are fine.
When I copyclip a dimension from one drawing with UCS set to world/north, then paste into another drawing with UCS rotated in Z (south for example), the text remains oriented to north. The original drawing doesn't have to be set to world, just something different from the paste orientation.
Is there a way to have the text orient itself to the current UCS at paste?
How can I copy the timecode from the clip in my viewer, and jump to that point in another clip?
I use this often to compare the same point in time for an offline to online clip. I can open the timecode input window, and manually enter the timecode from one clip to another, but I can't seem to find the copy and paste commands that will use that timecode as the input.
1. After creating a clip mask can I view it without the actual object also being visible?
2. Can I paste one object into the clip mask of a different object?
I just bought a GTCO Calcomp Drawing Board VI. I tried to set up but so far I can only use it like a mouse. I am working with AutoCAD 2007. In Tablet Works Control Panel, I set it to both Mouse and Wintab. The Drawing Board come with a wireless Stylus Pen. I did configure the tablet but I couldn't turn Tablet ON since it requires Calibration digitizer.
View 9 Replies View RelatedI'm working on skateboard model at the moment and struggling to curve the board. What applications shall I use.? Mesh is too complicated .
View 7 Replies View RelatedHaving a problem with Paste and Paste as Block in the right mouse click drop down window.
In the right Mouse click drop down window the Paste, Paste as Block and the Paste to Original Coordinates are grayed out.
The copy with Base Point works, as does the Ctrl+V and Ctrl+Shift+V and repeat Paste Block from the recent Input drop down selection. Why the paste commands are grayed out?
Can't get my calcomp tablet drawing board III to work properly,
I have xp pro - sp2 - tabletworks 7.46driver - autocad2007 and my 16 button puck macros dont work after editing main cui?
I am trying to create a hatch for board and bat siding. There are parallel lines at 1.5" apart that repeat every 8". When I try to use the hatch I get the following message:
Bad pattern definition file:
Missing parameter on line 8.
90, 0,0, 8
Here is the code;
*Boardbatt8
90, 0,0, 8
90, 1.5,0, 8
The file name is boardbatt8.pat
way to create a gypsum board wall with the metal fittings inside?
I mean to have the fitting for example every 60 cm/ 25 in, and the metal frame on top and bottom of it.
Is there any similar wall in the ACAD architecture tools palette?
I am trying to model foam insulation around a circuit board, that is set in a fixture, in an assembly. Is there any tool that will allow me to do this? I am trying to avoid modeling a seperate part with complicated geometry.
View 3 Replies View RelatedI need to insert gypsum board and wood siding and insulation into my drawings.
View 1 Replies View RelatedWhat is the most efficient way to cut and paste a paragraph from Word and paste it as text in AutoCAD ?
View 9 Replies View RelatedWhen I select a clip, it then goes to the start of the clip, how can I sop this happening and the clip stays in the same position when selected.
View 5 Replies View RelatedNot sure if this is possible, but is there any way to turn a 15 fps clip into a 30 fps clip?
View 3 Replies View RelatedI have two documents, one with a larger canvas than the other. If I bring a layer from the larger document to the smaller one I end up with artwork that is off the artboard/canvas and invisible. I can see this artwork if I drag the layer around.
Is there a way to remove this content which is unused/unseen? I get the feeling that it is bloating my file sizes...
I'm running a copy of Photoshop CS2. Basically just using it for glorified paint for a board game im putting together for friends. I'd like to define some points which the mouse snaps to, so I can draw circles and lines with their centers or ends at the same place, so I don't have to keep nudging over to the center pixel by pixel. I'll be drawing some angles, so a compass would be helpful too.
maybe Im using the wrong software. If, perhaps, you know of a better tool for what I'm doing,
Im tryin to edit my Invision Board Logo..
View 9 Replies View RelatedI am makeing an image for a customer. I am looking to take some text that was made on one art board and move it to another where I am assembling the complete image. However when I drag from one art board to the other the size of the cut and pasted art changes and the look of all its effects change as well.
The two documents have the same deminsions and the same resolution and color profiles. why this might be happening? Here is an example:this is the original
this is after I drag it or I cut and past it into another documentI am using photoshop cs5 on mac os 10.6.8
When I try and move my image out of the little grey and white checker board area I can't see the image and can't see my "flipped" portion of it.
How to I get the flipped image to show without that stupid freaking grey and white cheacker board showing up!!!!!
Is there a way to make a cool circuit board look?Or even make it look like tron?
View 1 Replies View RelatedI find myself using Black Backgrounds often in illustrator. Bleeding a Black BG makes it impossible to see the art board boarder.
The solution to this has been for me to either place guild lines on these guide lines (silly really) and jarring. specially when you already have guide lines there.
Or to make a new layer, place a box on the board and give it a outline .5 stroke thinkness or so depending on the zoom because white on the black line thats above it screws up visually depending on the distance you zoom out from.
Or has Adobe given us a choose your colour option i don't know about? 50% Grey would be great. can see on white and black.
1. I put a clip in a timeline , then i put a cfx clip on top of the first clip. Add axis clip to cfx clip, set transparancy to 100% (fully transparent) , when hit render , this cfx is still calculated.
2. if i have stack of cfx clips, the clips are solid (no matte or transparancy ). one clip is on top of the other. In the top layer , i add a axis fx and cut a very small hole. We can see even a very small hole ( that will exposed small part of the bg ) will trigger smoke to render both of the clip full frame. Actually i only will see small part of the BG so i'm expecting smoke to render only that visible pixel. How to control this ? In some case i will waste my time waiting smoke to render part that i don't need.
I want to edit a lot of videos of board and cards games for YouTube. I would like to add an overlay that displays the current score for each player. Here is an example of what I'm looking for: [URL]....I am an experienced AE / Premiere user. I know how to add and animate typography for short clips. My question is what the fastest and most efficient approach is for longer videos. The videos are up to an hour each. The scores change every minute. I don't want to be twiddling with keyframes. How to set up an efficient production workflow for this?
View 9 Replies View RelatedJust loaded cs5 onto a second computer legally. Any tiff or raw file brought into cs5 appears as a grey and white checker board image. From there its gets even crazier. CS5 works fine on the first computer. both loaded from the same legal disk.
View 1 Replies View RelatedBetween the graphic design showroom and the show board?
View 2 Replies View RelatedUsing PSPPX3 Ultimate.
The idea is probably a graphic design idea. I think PSPPX3 can do it though.
What I want to do is create something like a flyer or poster. So if it was physically I would have some poster board or a large sheet or paper, then I would arrange images and tape or glue them to it. Then scan and print off any copies if I needed them.
In software I think I want to be able to create a background and be able to enlarge it or shrink it down as I need to. Then start applying images and resize or reshape them on this "virtual canvas" or outside of the "virtual canvas" and bring them into the "virtual canvas".
Can this program do it, or do I need something like CorelDraw?