Photoshop :: Drag From One Art Board To Other Size Of Cut / Pasted Art Changes?
Feb 25, 2013
I am makeing an image for a customer. I am looking to take some text that was made on one art board and move it to another where I am assembling the complete image. However when I drag from one art board to the other the size of the cut and pasted art changes and the look of all its effects change as well.
The two documents have the same deminsions and the same resolution and color profiles. why this might be happening? Here is an example:this is the original
this is after I drag it or I cut and past it into another documentI am using photoshop cs5 on mac os 10.6.8
View 1 Replies
ADVERTISEMENT
Oct 9, 2013
So I have this multipage document I am working on and I needed more pages so I added the artboards I need however then now go beyond the clip board size (see picture below), how do I change that?
View 5 Replies
View Related
Nov 8, 2011
II need to cut and paste an image from one photoshop doc to another. This I can do just fine, but when I do, it resizes the image I pasted and makes it smaller. Since I'm wokring with scans that need to retain their exact size, this is not good.
-Also, the piece of the doc I'm cutting from is a little bit bigger than the 8..5 x 11 letter size doc I'm pasting into.
View 3 Replies
View Related
Nov 7, 2006
I am snapping from Nikon Coolpix L1 camera into 6.2 MPixel mode. When It comes to photoshop, I can see that the normal document size is, Width : 9.387 in and Height : 7.04 in (I am giving this reference from menu Image->Image Size).
Now, I am reducing this document into a size of W=5.347" x H=4.01" size for printing. Taking four nos. of similar documents and trying to paste all four documents into a single sheet of size 12"x8". This is because that the printing cost of a 12"x8" paper will be least, and that is why I am trying to compose four 5.3"x4" photographs into a single 12"x8" paper.
But the problem is that, when I am trying to paste (using copy-paste or drag-n-drop) any of the source pictures into destination sheet, the picture in the destination sheet is expanding and filling all the space of 12"x8".
What is the problem?
View 3 Replies
View Related
Jun 7, 2013
coming from CS3 to CS6 I would like to input artboard size and add crop marks to the board. Is this gone?
View 6 Replies
View Related
Apr 21, 2012
I have stitched together a picture and cropped it to by 21"x7" so that it can be printed as three separate 7x5 photos and framed together to make a pano. Right now the "master" image is perfectly sized at 21x7. When I try to cut out the first 7x5 portion, it resizes to 5.25x3.75 when I paste into a new image. If I resize it from there it becomes distorted. I've been using the rectangle selector set to fixed size (7x5); and selecting cut from then paste into new image from the edit menu.
How can I get the pasted image to be the same size as the one that is cut?
View 2 Replies
View Related
Apr 15, 2012
Within gimp, I selected a portion of one image, copied it, and pasted it on another image. Now I want to take the pasted selection and increase/decrease its size. What tool does this? 'Grow' and 'Scale Image' doesn't work.
View 1 Replies
View Related
Mar 8, 2006
Is there a method to hold down a key on the keyboard and drag to change the size of the brush , Instead of using the dialog box all the time ?
I have a German keyboard ... will this work too?
View 5 Replies
View Related
Oct 24, 2013
I have two documents, both with 300 DPI. The first is a 4x5 image and the second is an 11x17 page. I am trying to drag the entire 4x5 image (it's composed of several layers) onto the 11x17 page and keep it the same size. However, when I drag and drop, the 4x5 image is enlarged to fill the full width of the 11x17 page. This happens even if I hit shift. I recently upgraded from PSE10 where I did this regularly and can't figure out how to do it in PSE12. I have an iMac with OS 10.8.5.
View 11 Replies
View Related
Jul 31, 2008
I have two documents, one with a larger canvas than the other. If I bring a layer from the larger document to the smaller one I end up with artwork that is off the artboard/canvas and invisible. I can see this artwork if I drag the layer around.
Is there a way to remove this content which is unused/unseen? I get the feeling that it is bloating my file sizes...
View 2 Replies
View Related
Sep 19, 2008
I'm running a copy of Photoshop CS2. Basically just using it for glorified paint for a board game im putting together for friends. I'd like to define some points which the mouse snaps to, so I can draw circles and lines with their centers or ends at the same place, so I don't have to keep nudging over to the center pixel by pixel. I'll be drawing some angles, so a compass would be helpful too.
maybe Im using the wrong software. If, perhaps, you know of a better tool for what I'm doing,
View 1 Replies
View Related
Jan 5, 2014
In my Adobe Premire Pro CS6 project, When I select a clip that I want to drag down into the editing section it only allows me to drag the video and NOT the audio. I need both video and audio and it wont let me, I don't think I clicked anything wrong but
View 2 Replies
View Related
Aug 4, 2003
Im tryin to edit my Invision Board Logo..
View 9 Replies
View Related
Jan 25, 2013
Just loaded cs5 onto a second computer legally. Any tiff or raw file brought into cs5 appears as a grey and white checker board image. From there its gets even crazier. CS5 works fine on the first computer. both loaded from the same legal disk.
View 1 Replies
View Related
May 15, 2011
Between the graphic design showroom and the show board?
View 2 Replies
View Related
May 27, 2012
And everytime I change my brush settings in photoshop. it doesn't change anything. Everytime I turn off Shape dynamics the minute my pen touches the board it turns on!
View 2 Replies
View Related
Jul 8, 2012
PSCS6 shows the Clone tool transfer images so it is using Open Gl from my NVidia g610 graphics card but in "preferences" it shows no detected graphics processor in the performance window and therefore I cannot access the Hue wheel.
View 72 Replies
View Related
Oct 2, 2007
I just bought a GTCO Calcomp Drawing Board VI. I tried to set up but so far I can only use it like a mouse. I am working with AutoCAD 2007. In Tablet Works Control Panel, I set it to both Mouse and Wintab. The Drawing Board come with a wireless Stylus Pen. I did configure the tablet but I couldn't turn Tablet ON since it requires Calibration digitizer.
View 9 Replies
View Related
Feb 10, 2013
I'm working on skateboard model at the moment and struggling to curve the board. What applications shall I use.? Mesh is too complicated .
View 7 Replies
View Related
Jan 7, 2014
We are having a problem related to paste clipboard. We are extracting block attribute to MS access file using VB.net. While extracting block data, all block object in paste clipboard is also exported to MS access file. How to clear paste clip board using VB.net before exporting block attribute data. We want to extract block object existing in drawing only.
View 3 Replies
View Related
Aug 15, 2011
When I try and move my image out of the little grey and white checker board area I can't see the image and can't see my "flipped" portion of it.
How to I get the flipped image to show without that stupid freaking grey and white cheacker board showing up!!!!!
View 3 Replies
View Related
Aug 25, 2011
Is there a way to make a cool circuit board look?Or even make it look like tron?
View 1 Replies
View Related
Jan 14, 2013
I find myself using Black Backgrounds often in illustrator. Bleeding a Black BG makes it impossible to see the art board boarder.
The solution to this has been for me to either place guild lines on these guide lines (silly really) and jarring. specially when you already have guide lines there.
Or to make a new layer, place a box on the board and give it a outline .5 stroke thinkness or so depending on the zoom because white on the black line thats above it screws up visually depending on the distance you zoom out from.
Or has Adobe given us a choose your colour option i don't know about? 50% Grey would be great. can see on white and black.
View 4 Replies
View Related
Nov 14, 2007
When I cut out a group of people from a photo for the purpose of dropping them on top of a new background, I usually run into the same problem. Even tho' I may have set them on top of a concrete sidewalk or the likes, they still have that look of hovering or floating in mid air.
View 1 Replies
View Related
Dec 5, 2006
I have two similar images of a group of people. I need to cut and paste two of the heads onto to the other image because their expressions are better.
Unfortunately, I seem to have stepped forward a little when taking the photograph, so consequently the proportions are a bit out when I cut and paste.
View 4 Replies
View Related
Mar 20, 2007
I am shooting interior photographs of houses. I use natural light and it is impossible to get the correct exposure for the interior and the windows. I take two exposures one for inside and one for windows and lights. I then try to cut the windows out of the underexposed photo and paste them into the overexposed windows. The problem I get is that I can never get a clean cut and have some jagged edges. How do I blend the edges of the windows to look natural or another way to blend the 2 images together.
View 4 Replies
View Related
Nov 28, 2013
I am facing autocad-2014 error is "copy to clip board failed" entire drawing getting same problem,one particular file giving problem.
View 1 Replies
View Related
Mar 2, 2009
Can't get my calcomp tablet drawing board III to work properly,
I have xp pro - sp2 - tabletworks 7.46driver - autocad2007 and my 16 button puck macros dont work after editing main cui?
View 7 Replies
View Related
Apr 4, 2014
I want to edit a lot of videos of board and cards games for YouTube. I would like to add an overlay that displays the current score for each player. Here is an example of what I'm looking for: [URL]....I am an experienced AE / Premiere user. I know how to add and animate typography for short clips. My question is what the fastest and most efficient approach is for longer videos. The videos are up to an hour each. The scores change every minute. I don't want to be twiddling with keyframes. How to set up an efficient production workflow for this?
View 9 Replies
View Related
Nov 17, 2013
whatever screenshots I paste into Photoshop all becomes blurry, or "low quality" if you will. I tried pasting the same image in Paint or Illustrator, they remain sharp and fine as they.
I'm running PS CS5 x64 on Win 7 x64
View 36 Replies
View Related
Nov 21, 2012
Any time I paste an object from AI into PS, it's getting horizontally squashed. Here's an example:
1. 12x12 pixel circle in Illustrator, aligned to pixel grid.
2. Pasted into Photoshop as a Smart Object, it's visibly distorted (12x11), but the W/H is inaccurately labeled 100%.
3. After pasted, if I select Edit > Transform > Scale, now the starting W/H are shown with the accurate distorted values.
View 55 Replies
View Related
