I have two similar images of a group of people. I need to cut and paste two of the heads onto to the other image because their expressions are better.
Unfortunately, I seem to have stepped forward a little when taking the photograph, so consequently the proportions are a bit out when I cut and paste.
I'm fairly new to Photoshop. I'm trying to resize a image which I've pasted into a layer, I know how to Transform and rescale the image but I'd like to enter the width of the image in Pixels somewhere.
I'm designing an advert for a billboard, I've created an A4 landscape canvas and I'd like to put 5 images at the bottom of the canvas but I'd like to set them all to the same size which fits across the whole width of the canvas.
I want to create a collage. I set a feather value, make a selection out of a 2nd image and paste it into another file. Pastes in fine, but when I try and grab the corner of the pasted layer and resize it to be smaller, for some reason (I have done this approach on 20 other occasions), it doesn't resize as a rectangle as it should. It starts to resize as an octagon type shape. The following link shows an example of a freshly pasted layer that I tried to resize. There must be some setting that got changed because I have done this across four different versions of paint shop
Example below that shows the big layer getting "bent out of shape". URL....
When I copy and paste a pdf document into Corel Draw, it seems as the default size of the pasted object reflects anywhere from 23" (left to right) & 17" (top to bottom) = 23"x17". After selecting the object, & entering an object size of 8" x 11", the document then resizes to 2"x3". So, then I always have to enter the 8"x11" again for it to finally accept that size - which it always does, but on the 2nd time trying.
View 15 Replies View RelatedI need to be able to re-size images that are large than 1MB in order to put them on our MLS site.
My previous computer had 2 arrow icons on the desktop.
One was for re-sizing horizontal pics and the other for re-sizing vertical pics.
I could simply drag/drop the image file onto these re-sizing icons and they would be re-sized.
The smaller file size thumbnail would appear on the desktop.
How can I get these re-sizing tools on my new computer's desktop?
I am using CS6.
When I cut out a group of people from a photo for the purpose of dropping them on top of a new background, I usually run into the same problem. Even tho' I may have set them on top of a concrete sidewalk or the likes, they still have that look of hovering or floating in mid air.
View 1 Replies View RelatedI am shooting interior photographs of houses. I use natural light and it is impossible to get the correct exposure for the interior and the windows. I take two exposures one for inside and one for windows and lights. I then try to cut the windows out of the underexposed photo and paste them into the overexposed windows. The problem I get is that I can never get a clean cut and have some jagged edges. How do I blend the edges of the windows to look natural or another way to blend the 2 images together.
View 4 Replies View Relatedwhatever screenshots I paste into Photoshop all becomes blurry, or "low quality" if you will. I tried pasting the same image in Paint or Illustrator, they remain sharp and fine as they.
I'm running PS CS5 x64 on Win 7 x64
Any time I paste an object from AI into PS, it's getting horizontally squashed. Here's an example:
1. 12x12 pixel circle in Illustrator, aligned to pixel grid.
2. Pasted into Photoshop as a Smart Object, it's visibly distorted (12x11), but the W/H is inaccurately labeled 100%.
3. After pasted, if I select Edit > Transform > Scale, now the starting W/H are shown with the accurate distorted values.
I am makeing an image for a customer. I am looking to take some text that was made on one art board and move it to another where I am assembling the complete image. However when I drag from one art board to the other the size of the cut and pasted art changes and the look of all its effects change as well.
The two documents have the same deminsions and the same resolution and color profiles. why this might be happening? Here is an example:this is the original
this is after I drag it or I cut and past it into another documentI am using photoshop cs5 on mac os 10.6.8
When text is pasted from one CS5 document into another and is inserted into the existing text in the destination doc, is comes in as a size different from either the source or distination size. Both docs are of the same resolution. The text being transferred is acquiring new formatting somehow. These are older docs, I don’t know what I might have done with/to them previously.
View 2 Replies View RelatedII need to cut and paste an image from one photoshop doc to another. This I can do just fine, but when I do, it resizes the image I pasted and makes it smaller. Since I'm wokring with scans that need to retain their exact size, this is not good.
-Also, the piece of the doc I'm cutting from is a little bit bigger than the 8..5 x 11 letter size doc I'm pasting into.
How do I make a pasted image more transparent?
View 2 Replies View RelatedMaking early steps in Photoshop, my little sister put a lettering over a photo, worked with filters,etc, and then properly flattened image and saved it as jpg.
All looks nice but she did it on the original instead of working with a copy . As a result , the photo, which is important for the family archive, now has this lettering all over and we don't know how to clean it up.
The letters are semi transparent with no sharp edges, the photo underneath is partly visible.
I 've tried to select letters and do something with filters, but the parts of the photo visible under the letters, are with different texture and colours and and I've achieved nothing - the letters are almost impossible to select properly. Even when selected more or less properly and treated with filters/layer transparency/etc they are still clearly visible, only their colour and saturation changes...
Tried everything within my limited Photoshop skills incl, trying to find any History palette which to use to reverse all lettering done over the photo but History was not saved.
It is a digital photo,so, there is no film to scan and have a clean original...
Could someone with Photoshop skills better than mine, please, tell me how to remove this text from the photo - it is an important part of our family photo archive and I'm desperate to restore it to the original condition.
I have Photoshop 5.5
Why can't i move the pasted selection. it was cut from another photo and copied to this one. It was dropped in the middle of the photo but the move tool has no effect on it.
View 6 Replies View Related The project involves me cutting out pieces of various images, and pasting them into one main image. It was going fine for the first ten or so image pieces, but the last time I tried to do it, something very strange happened.
When I pasted the piece of an image into my main image, it came out red and transparent.why it's doing this because I didn't change anything or do anything differently. What can I do to fix this?
all transparent png files copied from Chrome and pasted into Photoshop CS6. The background is black rather than transparent. These images are one I created and exported using "save for web". It worked fine in CS5 so it must be a bug.
I constantly have to edit images taken from our website so being able to copy an image quickly with transparency intact is very important. I'm running CS6 in Windows.
I'll take a screenshot of something in my browser, and then paste the screenshot into a new PS document, and suddenly all of the colors have shifted red...a lot. Now, when I save and view the images outside of PS, the colors have returned to normal, but this makes me very nervous about designing in PS, color matching, etc.
I've played around with the Color Management settings, most recently just switching off all Color Management, but nothing seems to fix this issue. To be honest, though, I don't really know what I'm doing in there with those color settings. I thought just setting everything to US Web would fix the problem, but It hasn't changed anything.
When I first installed 8.0 on my older XP machine, I didn't have any of these problems.
I am getting a hold on using various meathods to paste a selected object (a person) into another image....
but the issue i have is matching the color tonality (i hope i am using the correct word) of the pasted person matching the image i pasted into!! ...
I have tried, the hue and saturation and curves, dodge and burn, brighness and contrast, and a couple of others on the selected person/object it still looks unnatural ..
I am snapping from Nikon Coolpix L1 camera into 6.2 MPixel mode. When It comes to photoshop, I can see that the normal document size is, Width : 9.387 in and Height : 7.04 in (I am giving this reference from menu Image->Image Size).
Now, I am reducing this document into a size of W=5.347" x H=4.01" size for printing. Taking four nos. of similar documents and trying to paste all four documents into a single sheet of size 12"x8". This is because that the printing cost of a 12"x8" paper will be least, and that is why I am trying to compose four 5.3"x4" photographs into a single 12"x8" paper.
But the problem is that, when I am trying to paste (using copy-paste or drag-n-drop) any of the source pictures into destination sheet, the picture in the destination sheet is expanding and filling all the space of 12"x8".
What is the problem?
I am trying to verify the bending strength of a solid part. Need to calculate the section modulus on certain cross section. Don't know how to do it using inventor.
View 7 Replies View RelatedI'm looking to basically do what this video shows:
[URL]........
I just want to create a section from the point cloud, but the point cloud won't allow me to select it as an object in the 'Generate 2D/3D section' dialogue as it's not a solid/surface.
On an unrelated note, I find snapping to the point cloud impossible - is there an option in OSNAP that I'm missing? I've tried this with attached PCGs and RCP point clouds, no difference.
I pasted a vector object into PS CS6 (13.0.1 x32) today directly from Illustrator CS6 (16.0.1 x32), and selected "Paste as Smart Object" (Windows XP Pro SP3).
I then tried to warp the pasted object using the Free Transform tool by dragging one of the corner handles with CTRL held down (Windows).
This usually warpsdistorts the object, but instead, this launched a skew operation.
If I paste as Shape Layer or as Pixels then apply Free Transform, <Ctrl + corner handle drag> performs a warpdistort operation. Also, if I rasterise the pasted AI object, and then convert to a Smart Object I can warpdistort.
Is it not possible to paste an Illustrator vector in as a Smart Object, and then warpdistort it directly using this technique?
Ps CS6 v13.0.1
OS X 10.6.8
Problem: Ps CS6 incorrectly renders vector objects pasted from Adobe Illustrator. CS5.1 does not exhibit the problem.
Below is screenshot of artwork in Illustrator and which is copied to clipboard, followed by screenshot of "Paste as Smart Object" in Ps CS5.1 then screenshot of same paste in CS6. "Paste as Pixels" gives identical good rendering in CS5.1 and poor rendering (gray pixels which should be pure white in this example) in CS6. This is repeatable with other artwork.
Several weeks ago there was a complaint in this forum that Photoshop CS6 poorly renders vector artwork that is pixel-aligned in Illustrator. The Adobe response was that Photoshop is correct. Strange that CS5.1 can render pasted vector artwork perfectly and only CS6 makes a mess.
I have lots of section views with some surfaces and pipes. Unfortunately, in a number of section views pipes are not shown in full height because the section view level range is too little. What I am wondering is - is it possible to automatically adjust section level ranges so that they fully include pipe sections? Please see also the image in the attachment.
View 2 Replies View RelatedC3D 2012...but this feature has probably been in C3D for sometime
1-What is a 'Line Marker in Section' Section component of an Alignment Style?
2-How is it used (example )?
When i am creating section sheets from multiple section views ,section sheet view port scale changes.I did set it correctly in my template.
For example it changs from 1:150 to 1:150_1
Then in section sheets scetions views are not displaying correctly.
When i change view port scale manually it shows correctly.But it should do to all sheets.
What should I do?
In model spacr multiple section views are showing correctly.
AutoCAD Civil 3D 2012 SP 2
Sri Lanka
Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
The section view behaves strangely with the ‘section participation: none’ components
Invertor2012 sp2
Win7 x64
why my section is not parallel with my section line. I did constrain my section line in the section line sketch.
View 2 Replies View RelatedIn my section editor my labels show up correctly and in all the locations I want. But then, in my cross section file, I look in my section views and they are completely different. When I try to label more points under the Code Set Styles, they won't even show up on my section views.
View 6 Replies View Related