Maya Modeling :: Mesh Partially Changing To Wire Frame
Feb 12, 2013
I have been working on a head model on and off for a couple of days to practice extrusion methods, I have been working with smooth shade. When I went back to it yesterday I came across this problem - Anytime I went to extrude/bride/append/soften normals etc my model the part I was extruding would turn to wire frame and an unrelated part of the head would change to wire frame also. I am mirroring the mesh down the middle; sometimes the mirrored half is changed to wire frame also, sometimes not.
As I didn't know how to fix the issue I reverted to an earlier save I had made before the affected areas had been built up. Now I have nearly finished getting back to the same point I was at yesterday I'm coming across the same problem.
i'm trying to use the wire tool deformer to sculpt some mouth shapes on my character but when i turn the wire tool on the faces of my mesh around the mouth area dissapear,I can still see the wireframe but the faces dissapear, I tried to turn down the dropoff distance attribute but to no avail.
Everything draws correctly in shaded mode but it you are in wireframe mode with the object selected at the object level the grid and the selected object no longer draw.
from what I understand, mesh cleanup fixes problems with bad geometry. but is there a function by which I can delete all edgeloops in a mesh that don't contribute to the shape? so Maya turns the mesh into as low rez as possible while retaining the shape....
I bought a 3d mesh model of a chair I want to make out of wood. To do this I want to use Maya to create 2D slices of the mesh model that I can use as templates for my woodwork.
The model looks great in Maya, but how to create these slices or 2D views and print them.
Is there any way for editing more then one meshes at a time? For example: I want to extrude, bevel, connect components of my two cubes at the same time.
I've just extruded a face. I realize I need make a slight adjustment. I don't want to undo the extrudtion nor do I want do an Edit Mesh to create a new extrusion.Is there an easy way to readjust an extrudtion?
I need merge many objects in one for export to fbx. If I delete any of polySurface objects, mesh lowpolyHouse crushes. If I stay it, than it all export to fbx file, problem is that I need mesh object only.
I am using maya 2011. I have a simple roof, which i extracted faces from the small house (see pic1). However, when i smooth the roof, all the extracted faces went smooth individually (see pic2). How can i combine all those individual faces i extruded, to make into a single mesh or polygon, so that when i press 3, it will smooth like as in pic3 rather than individually.
I do sometimes buy some objects at Turbosquid that I download as .obj files.
They are represented as a single mesh object in Maya, however when I look the material of this mesh, I see different tabs representing the different sections of the mesh with the different materials (e.g. a duck would be seen as 1 mesh, but 1 material for the body, 1 for the left eye and 1 for the right eye).
How to split up this mesh in different meshes by material ?
I'm using Maya 2013 and I can't find "Edit Mesh" at the top of the window. I've found this page (
[URL]......
but it refers to Maya 2012. The second problem is:
I'm trying to put an image on the cylinder-surface. I've found a youtube-video (added bellow) which says I have to click on "Cylindrical Mapping" after making a "blinn2" (and so on).
But when I click on "Cylindrical Mapping" nothing happens. There isn't even an error message.
I am stumbling through the lessons and am stuck on Lesson #1.For those who do not know, it is to model a helmet similar to a dirt bike helmet. I have created a smoothed poly, removed much of it to create the top portion of the helmet (or cap).
I have created a poly shape using the Mesh >> Create Poly command. I have extruded said poly 3 times to shape the front facial guard.
The next step tells me to use the bridge border edges command. My problem is only my "cap" is showing a border edge. The facial shield poly has no border and I cant figure out why?
I have tried Display >> Polygons >> Border Edges and it doesn't make a difference on the facial shield.how do i view the border edges on said poly?
So I am trying to use "fill hole" for this empty space on my mesh but it isn't working. I know I can figure out another solution to this problem but I want to know why it won't work.
First of all, when I double click the edge around the hole it doesn't just select the hole, it selects a huge ring that goes around the whole head for some reason (I'm attaching a picture).
Then when I select the edges around the hole one by one and select "fill hole" nothing happens and I get a message at the bottom of the screen that says "polycloseborder2" (I am also including a pic of this).
I have problem when i duplicate polygon another side of model. The object is not smooth, it look like different model. I try to "combine" and "mesh" vertex from middle of object. but it still same. The polygon will smooth if i use "smooth tool". But i need low polygon for transfer map from high polygon to low polygon. but it not work, because low polygon look like different model.
I need smooth low polygon, but not to much smooth. I need only when i duplicate polygon, it not look like different model is okay.
I have a mesh that is made up of all quads and is a pretty dense object. I need to reduce the number of faces so can make it easier to work with and edit.
Whenever i use the reduce tool it takes my mesh that is all quads and distorts it to create a mesh that looks like the second picture above. How can i reduce my face or poly count without distorting my mesh so badly and keep only quads.
I am a newbie, and doing the helmet tutorial. It is asking me to go to the edit mesh menu and select the split polygon tool. It isn't there. where is it.
when modeling the movement or scale tool is so small I find it difficult to grab one of the arrows without super zooming in and moving the camera around alot.
No matter what changes I make in the UV texture editor, the texture on my model doesn't change (with the colors I put on it until I finalized the UV map, it would be pretty obvious). But nothing happens. Move UVs, Rotate UVs, Scale UVs--does not change the texture on the model.
Am I missing something? This all used to work just fine. Is it a setting change? Is this something caused by brining a Maya2010 file into 2011?
How best to go about creating a "wire mesh". What i have tried is to create a solid flat (2mm thick) piece of material. I then draw a diamond shape on the surface & extrude it so as to give me a void.
Then i use the rectangular pattern option. The problem is that when i try putting in the amounts of the "holes" i need to brings up message to use optimized compute. I do that and then when i click to crate all the "holes" it comes up with a pattern failure error.
I thought they were supposed to appear when the Polygon shelf is selected? I don't see them. In fact, when I select different shelves the menu items on the right half of the task bar don't change at all. Is this normal?
im having problems with max 2012 after hotfix 2 im working on some terrain and when i just move a tiny bit wireframe just go completely diseaper and its hard to model when you dont se wireframe everything was fine until hf2.
I am trying to create two objects: something called a gravity well and a wire framed globe in Photoshop 3D CS6. The examples are here:
[URL]...
I tried using a gradient map to create a depth map but the form is not editable if I understand PS 3D correctly. Only the scale, light, texture and perspective.
The surace of the gravity well needs to be a white wire grid pattern over black with. The globe is basically the same. Can this be accomplished on Photoshop CS6 3D or do I have to farm this out to a 3D guy.
I have included samples of my objectives: #1 and 5 plus screen shots of what I ended up with, the form of which was uneditable based on what I understand. I also don't know how I would create the wire frame once I have the form.
I deally I would use the final images as png's on a 2D suface which I would later wrap onto a 3D surface.
I have a 3D drawing that I am trying to hide the wireframe when I plot a particulat layout, one of several in the drawing. It plotted properly before, but something must have changed as I cannot plot without is comming out transparent (unhidden).
What could have changed, or how I can plot it hidden?
I would be able to export an FBX file from Revit directly into Maya (I work for an architecture firm and we exclusively use Maya), especially since none of us have 3ds Max... I am aware of materials and RPC conflicts and have tried every way I know how to to simply export basic architectural models so that they open in Maya (I'm fine with adding shaders in Maya)... So I've tried everything I know to modify the file but no matter what I do I seem to have this gray shade that blacks out the model if I try to zoom out (in Maya). I even downloaded a trial of 3ds to try it through there with no luck. Same problem... I can tell the model is there and complete but like I said, blackout whenever I rotate and zoom.
Is there any way to make it so that when I move into wireframe display or edged faces, only the selected object is rendered that way? I don't want everything getting in the way and confusing me with a jumble of wires.
I was working in CAD wire-frame and I'm drawing a small plate 230*60*15, is there any way to turn this into a solid object or add edges to it, so it appears as 1 object?
I realise you can draw a simple 2d line and extrude the edges but what i want to know is can you add surfaces to the wire frame.
After creating a shape fron vector layer in After Effects, I can set the extrusion depth, toggle on a 3-D layer, and extrude this object inasmuch as I see its extruded wire frame. However, the shape which I wish to extrude seems to remain flat, as though an image glued to one side of a box, How do I get this shape to take the depth or appearance of its wire frame? Ray tracing is active, and under Geometry options I set an extrusion depth of 77.
