Everything draws correctly in shaded mode but it you are in wireframe mode with the object selected at the object level the grid and the selected object no longer draw.
View 5 Replieswhen I modeling something I Button pressed mistake and then show me the my work a wire frame !! ..
I tried to press on [WireFrame] and [smooth shade all] buttons but nothing change it's just keep a wire frame.
I have been working on a head model on and off for a couple of days to practice extrusion methods, I have been working with smooth shade. When I went back to it yesterday I came across this problem - Anytime I went to extrude/bride/append/soften normals etc my model the part I was extruding would turn to wire frame and an unrelated part of the head would change to wire frame also. I am mirroring the mesh down the middle; sometimes the mirrored half is changed to wire frame also, sometimes not.
As I didn't know how to fix the issue I reverted to an earlier save I had made before the affected areas had been built up. Now I have nearly finished getting back to the same point I was at yesterday I'm coming across the same problem.
how to draw the intersection wire like a half circle passing over the other wire.
View 9 Replies View RelatedI'm new to Maya and Maya 2011
I create a new file.. and a new imageplane.. and it's frozen in all views.. it doesn't move around as it's supposed too when I tumble.
In the image plane attributes panel the image plane is set to 'attached to camera' changing it to fixed makes no difference.
Any chance I can make an Image Plane behave like a one-sided display? Like sort of a Backface Culling option for Image Planes?
View 2 Replies View RelatedHow do you draw polylines in different planes? If I set the normal it does nothing. I would like to use polyline2d because you can use bulges and not with polyline3d.
<CommandMethod(
"testpline")> _
Public
Subtestpline()
'' Get the current document and database, and start a transactionDim acDoc AsDocument = Application.DocumentManager.MdiActiveDocument
[code].......
im having problems with max 2012 after hotfix 2 im working on some terrain and when i just move a tiny bit wireframe just go completely diseaper and its hard to model when you dont se wireframe everything was fine until hf2.
View 3 Replies View RelatedWhen you render an shot, is there a way to get the frame number to be included in the rendered image? So that when they are put together into a movie a viewer can pause to see what frame it's on so that accurate critiques can be made.
View 5 Replies View RelatedI am trying to create two objects: something called a gravity well and a wire framed globe in Photoshop 3D CS6. The examples are here:
[URL]...
I tried using a gradient map to create a depth map but the form is not editable if I understand PS 3D correctly. Only the scale, light, texture and perspective.
The surace of the gravity well needs to be a white wire grid pattern over black with. The globe is basically the same. Can this be accomplished on Photoshop CS6 3D or do I have to farm this out to a 3D guy.
I have included samples of my objectives: #1 and 5 plus screen shots of what I ended up with, the form of which was uneditable based on what I understand. I also don't know how I would create the wire frame once I have the form.
I deally I would use the final images as png's on a 2D suface which I would later wrap onto a 3D surface.
I have a 3D drawing that I am trying to hide the wireframe when I plot a particulat layout, one of several in the drawing. It plotted properly before, but something must have changed as I cannot plot without is comming out transparent (unhidden).
What could have changed, or how I can plot it hidden?
Is there any way to view a graphic in (let's say) wire frame and enhanced - in different windows or monitors ?
View 4 Replies View RelatedIs there any way to make it so that when I move into wireframe display or edged faces, only the selected object is rendered that way? I don't want everything getting in the way and confusing me with a jumble of wires.
View 1 Replies View RelatedI was working in CAD wire-frame and I'm drawing a small plate 230*60*15, is there any way to turn this into a solid object or add edges to it, so it appears as 1 object?
I realise you can draw a simple 2d line and extrude the edges but what i want to know is can you add surfaces to the wire frame.
After creating a shape fron vector layer in After Effects, I can set the extrusion depth, toggle on a 3-D layer, and extrude this object inasmuch as I see its extruded wire frame. However, the shape which I wish to extrude seems to remain flat, as though an image glued to one side of a box, How do I get this shape to take the depth or appearance of its wire frame? Ray tracing is active, and under Geometry options I set an extrusion depth of 77.
View 7 Replies View RelatedHow to make a basic wire frame-like (just the supports) layer for this tunnel.
View 2 Replies View Relatedi'm trying to make a banner for a jewelry store and the guy wants a wire-frame diamond that rotates... i have absolutely no clue where to begin. does anyone know how to accomplish this? can it be done in photoshop/imageready?
except i want just the wire-frame of the diamond, not actual shading, and also maybe have the diamond rotated 45 degrees to the left.
what/where is the pref to change the color of wire frame of a selected object- I'm trying to use the unwrap uvw and the fragile, winsome pale blue of a seam doesn't show up against the peak white of the wireframe.
(I must say my whole experience of 3dsmax has been awful because I can almost never clearly see what I am doing, as the whole interface color scheme is horribly designed)
here's a pic - spot the seam - this is in hidden line mode as you can/cant see, the pale blue line of the seam is blown out by the wireframe.
In previous versions, as clunky as it was, I used to put a work plane in the centre of a frame generator part using "G_L/2"
This does not seem to work anymore in 2013.
Inventor Professional 2014.
Windows 7 64 bit.
Dimensions show when viewport style is set to 2d wire frame, but only show when they are draged outside the viewport frame when it is set to 3D hidden. Policy is no diemensions in modle space. So how do I show dimensions in paper space with the viewport style set to 3D hidden?
View 3 Replies View RelatedAutocad architecture 2014 64bit displays conceptual views as wire frame for walls when displayed in 3D
View 9 Replies View RelatedAutocad architecture 2014 64bit displays conceptual views as wire frame when displayed in 3D;
View 9 Replies View Relatedi'm trying to use the wire tool deformer to sculpt some mouth shapes on my character but when i turn the wire tool on the faces of my mesh around the mouth area dissapear,I can still see the wireframe but the faces dissapear, I tried to turn down the dropoff distance attribute but to no avail.
View 6 Replies View RelatedI must have hit something on the keyboard by inadvertence, and now the perspective camera is shown in all views.
View 2 Replies View RelatedI don't know what went wrong with that View. I can create polygon planes properly in all views but top view.What can I do to make it function again when I set up the Project.this problem occurs everytime when I set up Image Planes for the top, side and front view. URL...
View 2 Replies View RelatedWhen printing in 3d with the vp set to 3dhidden and the shade plot set to hidden legacy some solid items print with the wire frame. This usualy happens with torus and cones. How do I stop this?
In the example look at the U-bolt.
how to mesh wire together in a pattern on a pole of say 60mm diameter and 1 metre length?
View 9 Replies View RelatedHaven't used AC in a while and hoping this is a simple question, trying to take a polyline (in this case a coil shape) and add a diameter to the line. This 3D object will then be imported to COMSOL for some thermal expansion modeling.
Is there an easy way to do this?
I've used cad now in a basic 2d architectural sense now for 10 years, through various versions.
I have recently dropped back to a 2007 from 2008 (changed jobs) and for some reason the draw order is all messed up i noticed this first through hatching but its on everything including inserted images.
I've tried a few of the solutions on other threads even uninstalling cad and re-installing it and nothing seems to be sorting it. Functions like 'send to back' etc just don't work and the draw orders are all to pot.
I'm using Maya 2013 SP2 on a MacBook Pro running 19.8.2. When trying to load 32-bit floating point OpenEXR or Tiff files for displacement maps I will invariably get the following error:
// Warning: Failed to open texture file: <file path>
The proper OpenEXRLoader and tiffFloatReader bundles are loaded in the Plug-in Manager and the very same files open without issue on Maya 2013 on my Win7 machine. It seems this is OSX specific.
In the part file I created a table with the 2 different sizes used. I can manipulate the part by editing extrusion 1 and the ribs and slots adjust accordingly. However, I would like to keep track of the wire trough used in a similar fashion as a tube weldment, one part, but multiple lengths used, for BOM tracking.
AS soon as I author the part to structural shapes I get issues with the extrusions and sketches, looks like the initial geometry is lost it's constraints to projected lines. (sketches are full of the pink lines).