I have a 3D drawing that I am trying to hide the wireframe when I plot a particulat layout, one of several in the drawing. It plotted properly before, but something must have changed as I cannot plot without is comming out transparent (unhidden).
What could have changed, or how I can plot it hidden?
I was working in CAD wire-frame and I'm drawing a small plate 230*60*15, is there any way to turn this into a solid object or add edges to it, so it appears as 1 object?
I realise you can draw a simple 2d line and extrude the edges but what i want to know is can you add surfaces to the wire frame.
Dimensions show when viewport style is set to 2d wire frame, but only show when they are draged outside the viewport frame when it is set to 3D hidden. Policy is no diemensions in modle space. So how do I show dimensions in paper space with the viewport style set to 3D hidden?
View 3 Replies View RelatedMy modelspace is showing thru my wipeouts... But the wipeouts are active and I have remade the viewports with the same result. I've used draw order with no change. And here's the kicker. It (the Wipeout) hides the viewport frame, but not the actual model space material being shown thru the viewport. It remains visible.
View 6 Replies View RelatedAutocad architecture 2014 64bit displays conceptual views as wire frame for walls when displayed in 3D
View 9 Replies View RelatedAutocad architecture 2014 64bit displays conceptual views as wire frame when displayed in 3D;
View 9 Replies View Relatedwhen I modeling something I Button pressed mistake and then show me the my work a wire frame !! ..
I tried to press on [WireFrame] and [smooth shade all] buttons but nothing change it's just keep a wire frame.
im having problems with max 2012 after hotfix 2 im working on some terrain and when i just move a tiny bit wireframe just go completely diseaper and its hard to model when you dont se wireframe everything was fine until hf2.
View 3 Replies View RelatedI am trying to create two objects: something called a gravity well and a wire framed globe in Photoshop 3D CS6. The examples are here:
[URL]...
I tried using a gradient map to create a depth map but the form is not editable if I understand PS 3D correctly. Only the scale, light, texture and perspective.
The surace of the gravity well needs to be a white wire grid pattern over black with. The globe is basically the same. Can this be accomplished on Photoshop CS6 3D or do I have to farm this out to a 3D guy.
I have included samples of my objectives: #1 and 5 plus screen shots of what I ended up with, the form of which was uneditable based on what I understand. I also don't know how I would create the wire frame once I have the form.
I deally I would use the final images as png's on a 2D suface which I would later wrap onto a 3D surface.
Is there any way to hide an object for just one frame of animation? Actually, I want to hide it for several-- I'm doing renderings for a game, and at one point I want to render the character's hands without the object he's holding.
But when I hide an object, it hides everywhen. How can I say "this object doesn't appear between frames 17-30?"
Is there any way to view a graphic in (let's say) wire frame and enhanced - in different windows or monitors ?
View 4 Replies View RelatedIs there any way to make it so that when I move into wireframe display or edged faces, only the selected object is rendered that way? I don't want everything getting in the way and confusing me with a jumble of wires.
View 1 Replies View RelatedAfter creating a shape fron vector layer in After Effects, I can set the extrusion depth, toggle on a 3-D layer, and extrude this object inasmuch as I see its extruded wire frame. However, the shape which I wish to extrude seems to remain flat, as though an image glued to one side of a box, How do I get this shape to take the depth or appearance of its wire frame? Ray tracing is active, and under Geometry options I set an extrusion depth of 77.
View 7 Replies View RelatedHow to make a basic wire frame-like (just the supports) layer for this tunnel.
View 2 Replies View Relatedi'm trying to make a banner for a jewelry store and the guy wants a wire-frame diamond that rotates... i have absolutely no clue where to begin. does anyone know how to accomplish this? can it be done in photoshop/imageready?
except i want just the wire-frame of the diamond, not actual shading, and also maybe have the diamond rotated 45 degrees to the left.
what/where is the pref to change the color of wire frame of a selected object- I'm trying to use the unwrap uvw and the fragile, winsome pale blue of a seam doesn't show up against the peak white of the wireframe.
(I must say my whole experience of 3dsmax has been awful because I can almost never clearly see what I am doing, as the whole interface color scheme is horribly designed)
here's a pic - spot the seam - this is in hidden line mode as you can/cant see, the pale blue line of the seam is blown out by the wireframe.
I have been working on a head model on and off for a couple of days to practice extrusion methods, I have been working with smooth shade. When I went back to it yesterday I came across this problem - Anytime I went to extrude/bride/append/soften normals etc my model the part I was extruding would turn to wire frame and an unrelated part of the head would change to wire frame also. I am mirroring the mesh down the middle; sometimes the mirrored half is changed to wire frame also, sometimes not.
As I didn't know how to fix the issue I reverted to an earlier save I had made before the affected areas had been built up. Now I have nearly finished getting back to the same point I was at yesterday I'm coming across the same problem.
Everything draws correctly in shaded mode but it you are in wireframe mode with the object selected at the object level the grid and the selected object no longer draw.
View 5 Replies View RelatedWhen printing in 3d with the vp set to 3dhidden and the shade plot set to hidden legacy some solid items print with the wire frame. This usualy happens with torus and cones. How do I stop this?
In the example look at the U-bolt.
how to draw the intersection wire like a half circle passing over the other wire.
View 9 Replies View Relatedhow to mesh wire together in a pattern on a pole of say 60mm diameter and 1 metre length?
View 9 Replies View RelatedI'm attempting to plot a drawing with a 3d shape and a title block around it. I would like for the occluded lines to not be drawn therefore I'm using the hidden visual style and set shade plot to hidden as well.
My problem arises from the quality of the plot to PDF versus the quality coming out of a printer. It is just a 8.5x11 page. The pdf comes out with horrible anti-aliasing and jagged lines, whereas the print is entirely smooth. Is there something simple I'm missing? It would be even better to find a way to make the plot to PDF come out in vector format! I know it is possible to show the layers and have them vectorized in a PDF... How is this done?
After using Custom Profile for Frame Generator, the Part List will show total length, not individually. How to split these frame members?
View 2 Replies View RelatedI created an extruded aluminium profile (attached file: Item Profile 8 80x80) which I published into the Content Center. When using this profile in a frame design, and using the Trim To Frame command, the profiles are trimmed at a weird angle (attached pdf file).
View 2 Replies View RelatedAfter using Custom Profile for Frame Generator, the Part List will show total length, not individually. how to split these frame members?
Inventor Professional 2013 SP1.1
Windows 7 Pro 64-bit, SP1
HP EliteBook 8460w; 8 GB RAM; i7 - 2.0 GHz; AMD Firepro M3900 -1 GB
There should be a way to Notch a straight frame to a curved frame! I want to laser cut the tube, so I really need to trim one tube to a curve tube.
View 8 Replies View RelatedI come across this problem from time to time and generally either just ignore it, if the detail is destined for in house manufacture, or alter it in autocad if it's destined for exterior suppliers.
Our guard frames are manufactured from extruded aluminum section (made by a company called palletti) I have when needed created a new frame generator frame member for each new x-section that we wish to use. I then draw a 2d sketch for the base frame skeleton and then a 3d sketch for all the frame work above. This I then use in an assembly to create the framework. This framework assembly then goes into a second assembly where the framework is then adorned with all the accoutrements that make up a guard frame that we can then order as an assembled frame, panels feet, hinges et al.
When placing the views for the detailing of the second assembly sometimes the view will show the wrong length for one or some of the frame members.
;note how the left and right views are different and how some of the frame members are elongated on the lh view.
I'm guessing its because of the home grown frame members but all seems to work well other wise and this only happens infrequently.
HP z210 16Gb ATI FirePro5800
Autodesk Produst design Suite 2012
I use Cad for Mac 2011. I made this "3d"-wire drawing to find out the angles of an object. Now when I make an angular inquiry the value given is right. When I try to put in an angular dimension it does not work. I put in a screenshot here to be more clear. This is the situation viewed from southeast:
Agular dimension.jpg
So, the angle I want to put the dimension to is the one between the red lines. When I choose "Angular Dimension" and then pick the two lines the dimension is automatically put on the two white lines next to the red lines. While the verteces of the dimension lay on the picked red lines the arrows point to the white lines and the value given also refers to them.
Haven't used AC in a while and hoping this is a simple question, trying to take a polyline (in this case a coil shape) and add a diameter to the line. This 3D object will then be imported to COMSOL for some thermal expansion modeling.
Is there an easy way to do this?
is it possible to define a 'natural direction' at a pin, in which a wire should start when connected to that pin? This would seem to be natural for me.
As the attached picture shows, my wire is connected at this pin in a weird direction (because I need to route it through the indicated segment).
What is the best strategy to do it correctly?
Another question: I increased the diameter of the segment, hoping that it means that the wires are constrained within the segment, but are free to move withini this. But they all seem to be constrained to the centerline. What I want is that all my wires pass within this 'tube' of 30mm diameter.
I work for a company that does custom electrical enclosures and we use a 2010 version of inventor professional. What would be required to run wire in assemblies easily and also output wiring diagrams?
View 1 Replies View Related