when modeling the movement or scale tool is so small I find it difficult to grab one of the arrows without super zooming in and moving the camera around alot.
is there a way to set a larger size?
I know there is a way to change the size of the arrows, I already did it and made them bigger and I forget how to make them small again...
View 1 Replies View RelatedI have just imported an FBX file fron sketchup, the manipulator handles for move, scale and rotate are really far away from the model, how can I move the handles so that it is in the centre of the model?
View 1 Replies View RelatedNo matter what changes I make in the UV texture editor, the texture on my model doesn't change (with the colors I put on it until I finalized the UV map, it would be pretty obvious). But nothing happens. Move UVs, Rotate UVs, Scale UVs--does not change the texture on the model.
Am I missing something? This all used to work just fine. Is it a setting change? Is this something caused by brining a Maya2010 file into 2011?
I have been working on a head model on and off for a couple of days to practice extrusion methods, I have been working with smooth shade. When I went back to it yesterday I came across this problem - Anytime I went to extrude/bride/append/soften normals etc my model the part I was extruding would turn to wire frame and an unrelated part of the head would change to wire frame also. I am mirroring the mesh down the middle; sometimes the mirrored half is changed to wire frame also, sometimes not.
As I didn't know how to fix the issue I reverted to an earlier save I had made before the affected areas had been built up. Now I have nearly finished getting back to the same point I was at yesterday I'm coming across the same problem.
I've created the german battleship Tirpitz. It has about 4.2 million polygons. When i save the file as an ASCII its about 1.2 GB and when I save it as a Bin its about 650 MB. I created the scene in 3DS Max where it has a file size of about 430 MB
My question is: Can I somehow shrink the size of the file without using a zip program.
i was trying to model a character in Maya and somehow messed up the pivot. The handle stretch beyond the horizon in the scale and move tool, and for the rotate one i can't see the circle no matter how far i zoom out.
View 1 Replies View RelatedI'm trying to get use to it.But I just have the problem that somehow the axis are all very small.
Like the axis when I want to move, rotate, scale,... sth.
And the size stays, no matter if I dolly, therefore it's sometimes difficult to click the right axis.
I have imported a model from C4D using the FBX importer, and everything was fine, except that it was way to big. I scaled it down to a more "manageable" size. So the scale reads 0.01 (All axis).
My question is, is there any way I can make Scale reflect the actual object size? Maya know these numbers, because they are present when using the universal manipulator tool. I would like it if the scene scale could reflect the real size of the object. So if i create a new object, the size relates to the size of the existing objects in the scene?
Can i put the real scale on the object, and then just "downscale the scene", so that the objects don`t appear giant? Like scene scale or something?
Is it possible to change the display size of the local rotation axis?
I'm trying to visually align the local rotation axis for joints with geometry that isn't always world axis aligned. I've searched on different forums as well as searches on "topeka" (google ), and I've come up with nothing so far.
3DS Max Design 2014 I am trying to get shaded Yellow road arrow markings. I added the markings to the resource kit .. (Diffuse and Opcaity using same image file)
When first used they look correct..
then with some editing to the model and many opens later the image is replaced by a grey block
this is what it looks like in shaded viewport, but still renders correctly
we dont always have time to render to file, we capture screen video. Is there a way to fix this? to get the yellow arrow in shaded viewport - permanently.
I have to make some arrows to point items in certain photos I use for model airplane kit instructions. I haven't been able to change the colour of the arrows. I need them mostly white. What can I do?
View 2 Replies View RelatedI have a problem when I am modeling my character or rather the character from the animation academy. I have created an NURBS sphere and I want to adjust it to the arm, so I go to the component mode add some isosparms and then it happens!!! I can´t move any vertexes... but in the object mode I can move the hole object.
View 1 Replies View RelatedSometimes when I plot/publish a DWF or PDF the arrows extend past the extension lines. I need the point of my arrows always end at the extension line?
View 1 Replies View RelatedI'm not sure what I did to make this happen or how to change it back, but for some reason when I change the size of an object/line it changes the stroke weight as well. (For example, if I drew an ellipse with stroke weight 2 pt, and then increased the size the stroke weight would be 2.856 pt or some such number instead of 2 pt.) How to change this back?
View 3 Replies View RelatedI want to change the size of the image in Gimp to 3957x4429 px (67x75 cm) at a 150dpi (the image we have has a 300 dpi.) When i do this in image - print size it keeps changing the width.
The system is not allowing me to get the picture a few cm larger. Is there any way I can overwrite this?
i currently have a logo that is 460X440 pixels and 12.17cmsX11.69cms and the resolution is 96 pixels per inch.
i am wanting to change it into a 2cm X 2cm avatar that is less than 6K in size,
how do i do this? everything i try makes the output file about 24k in size.
the reason i am doing this is the forum i regularly post on has a max avatar size of 6k.
Is there a way to change the leader arrowhead size without changing the dimension arrow/tick size?
View 9 Replies View RelatedI have a bunch of curves that is going to drive nhair. However I'd like to use the "soft modification tool" to do further adjustments to the curves. But I'd want to pin the root of the curves so it doesn't fly off the head when I use soft modification. Is there any way I can lock or pin the root CV of the curve? (its a cubic nurbs curve)
View 1 Replies View RelatedI wish to create a testing surface for simulation from a DSM height data (under a college assignment). I downloaded a height data from [URL]........ in a .dwg file format and want to import in on maya and create a surface out of it.
I am using maya 2013 on windows OS.
[URL]........
This is my model. Simple.
Now the only thing I want to do is to cut out this:
[URL]........
I used the Extrude tool just for visualization. The problem is, working with booleans apparently doesn't work for such objects, it works for freshly created clean polygons, but not for this one, when I try to use "Boolean difference" both objects disappear.
Extruding doesn't work because the faces are still there and I cannot delete them for whatever reason:
[URL].........
My cursor is pointing on the little face, but both are being highlighted. Making a hole through the the "Make a hole" function doesn't work because it only deletes faces as it seems.
i have been having problems with maya where i can't select individual faces vertices or anythign other than the entire model
View 8 Replies View RelatedMy model loses lambert on only certain faces every so often. Might be related to clicking on camera or trying to extrude certain edges. I want to delete the camera but this happens to the model every time i touch the camera. I can't reapply the lambert by pressing 6 or assigning new material. if you know what's happening.
View 1 Replies View RelatedI am looking for the same function in Maya that I use alot in 3DS. In 3DS, you can "Merge" (import) models from another scene (file) into your current one. It allows you to pick a single model from the imported scene to be imported into the current scene.
I know Maya has the import function but it seems to import all the objects. I just want to import a particular model.
Is this possible in maya?
3DS Max 6 to 2009, Maya 2010
NVIDIA Quadro 1700, Quad Core 2.67GHz, 4Gb RAM
[URL]....
Here is what I've tried so far in creating the pupil of the eyeball:
1. Right click - select isoparm - attempt to select.
2. Right click - select Surface Point - attempt to select.
3. Left clicking
4. Holding shift (and other keys) - attempt to select
5. Right clicking
6. Middle clicking
7. Marqueeing
When I right click - select surface point, I get something that looks like a selection, but it also has an isoparm dotted line.... when I attempt to DETACH I get an error.
I am attempting to import 3d models from a software called Daz studio into Maya. The models enter motionbuilder and 3ds Max with no problem. When I import them into Maya they come in as wireframe. I have been unable to take the wireframe off of the model. The file format I am using is FBX. wHEN I RENDER an image of the model i am able to see it in it's realistic form-but when i attempt to see it in the viewport it is wireframe.
View 1 Replies View RelatedSay I have a car engine that I created. to make it easier on myself I made it out of a bunch of separate pieces. then at the end I combined them into one. somewhere down the line I'll want to animate the pieces separately, but until then I dont want all that inner geometry rendering because it takes up unnecessary render time. is there a function in maya where I can delete all invisible mesh geometry? so then any faces inside the outermost shell will be deleted.
View 1 Replies View RelatedIn earlier version thats work just fine, but in 2013 i cant convert selections,...
View 1 Replies View RelatedI'm new to Maya, and also new to 3d modeling/animation programs. how can i learn Maya 2011? there are not very good learning paths to find on the internet.
View 1 Replies View RelatedIm a maya user since 3 or 4 months. Distance between tool for rigging which i cant find in maya 2013.
View 2 Replies View RelatedHow to craete feathers in maya 2012? Or any good plugin for it for win. 7 x32 bit Maya 2012 ?
View 1 Replies View Related