Since the last update I am having images corrupted (truncated) by lightroom, when I open some files in CS5 i get the message about the file being truncated and then only half the image come up.
Â
If I export the file again from LR it works so it's not the usual card malfunction or import errors, my hard drive is in fully working order and tested with drive sentinal.
Why oh why when I export any image from one folder to another do I end up with most keywords applied to that image written to my hierarchical keyword list as a new 1st level keyword and not under the parent keyword as they should be? I've tried everything. I'm using Windows 7 64 bit, with the latest LR 3. Export Synonyms, Include on Export, Export containing keywords are all checked with all the keywords and I've unchecked the Write Keywords as Hierarchy in the Export dialogue. With every export I have to clean up my keyword list and I'm at wits end with wasted hours.
View 7 Replies View RelatedWhen exporting points to a .TXT using PNEZD the elevation goes haywire.
After being exported it reads roughly 69000 in an area where the elevation should be about 5400 to 5800 feet
(very roughtly a factor of 12)
Is there a variable I can change to fix this?
Trimble Access, Civil 3d  2012 export road problem
when I export a road file to my TS2 it becomes corrupted (file size 50% of what it should be.
4 months ago there was no problem. The weird thing a is that the other worstation in the office has this issue to.
Here's what I have done to troubleshoot: swapped out both data collectorsexported this rxl file to a virtual instrument on my desktoptalked to cansel and autodesk but the said they haven't seen this problem. I can rule out the following.
Â
trimble/autodesk software, hardware ( to much a coincidence that both work stations have this problem)Data Collectors swapped out -  file size of the corrupted rxl were the same on the virtual deskto instrumentcorrupted dwg  - exported a road six months ago, now re-exported and the new file is corrupted.
Â
Both machines are identical:
Pentium Zeon
16 gb RAM
Identical software installation
I just installed CS4 and when I open any image it either has a weird screen over it or a bunch of triangles, some black and some from the image. Doesn't matter what type of image. I tried removing cs4, turning off virus protection and reinstalling but same problem. CS3 and Lightroom 2 work fine. Images look OK in Bridge. Running Windows Vista 32 bit, 3MB RAM, Intell Core Duo 2 CPU, ATI Radeon Graphics HD 2600 XT Processor and I did look for the latest driver update in the graphics processor. Doesn't matter at what size I view the image--it just changes the type of corruption I see.
View 1 Replies View RelatedSince I switched to Mavericks... premeire Pro CC has been corrupting my still images. I have imported them a dozen different ways to no avail. I have clean wiped my computer... ditched the CC suite and redownloaded it. Nothing works to correct the issue. I even bought a solid state HD and upgraded my graphics card.Â
Â
What is happening is half of the pictures information is lost. Each picture has a slightly different corruption but I can see the image fine if I scrub through my timeline. Its only when I hit play or pause over the clip that I see the corruption.Â
Early 2009 Mac Pro
Processor 2 x 2.26 GHz Quad-Core Intel Xeon
Memory 16 GB 1066 MHz DDR3 ECC
Graphics AMD Radeon HD 7950 3072 MB
I finished a project yesterday only to find that LR4 did not save any of the changes to my images.
I checked my second computer and it works fine but for some reason my laptop LR4 is not saving the edits to my images. I open the subfolder for LR images and they are untouched.
other than using my second computer! My workflow is set up to edit on Laptop and do bookeeping on my PC.
I cannot export images from LR to computer. It tells me there is not enough memory, but I have 60gb free
View 3 Replies View RelatedI'd like to export images from Lightroom 4 with a watermark. It COULD be text, but I want to rotate the watermark 30 degrees. I can't see a way to do that in the watermark editor in Lightroom...Â
Â
Alternatively, I created the watermark in Photoshop, put in the text, rotated it, and saved it as a jpeg. I can't get a clear background. It appears jpeg doesn't support that. SO, I saved it as a .png (jpg and png appear to be the only two formats supported for a graphic watermark in Lightroom). It looks FINE, except in Photoshop the text is WHITE, which is what I want in Lightroom, but every time I open the .png file in the watermark editor in Lightroom, it comes in with BLACK text...
Â
How do I get a Lightroom export watermark with the text I want in the font I want, angled the way I want?
I have LR 5.3 and everything has been working fine. Now I cannot export more that 5 images even though I have checked my registration number and it is correct.I am using Windows 7, 64 bit.
View 6 Replies View RelatedI cannot export images after processing in Lightroom 5 (the newest version). See the message on top.
View 2 Replies View RelatedI've Created a droplet and tested it successfully in Photoshop, then I use this droplet by select it in Post-Processing when I export DNG to TIFF in Lightroom, but there's a problem:
Â
1. If PS is not opened when I'm exporting images in LR, the droplet will work well, i'll get an processed TIFF
2. If PS is opened before I'm exporting images in LR, the droplet won't work, then I get an unprocessed TIFF
Â
Due to Situation 1, if PS is not opened when I'm exporting images and I tried to exported 30 images with droplet, finally I'll get only ONE image successfully processed, because PS was opened when LR export the first image.
Lightroom 4.3 no longer exports photos correctly.
Error Message is :-Â Â Unable to Export :- an internal error has occurred; WIN32 API error 2 (the system cannot find the file specified) when calling ShellexecuteExW fromAgWorkspace.shellexecute.
Â
Photos are exported, but without the EXIF data?
Â
I have tried uninstalling and reinstalling Lightroom. I have also tried Restoring Win 7 to an earlier build, but with no success.
I edit an image in Lr5, and it's crips and perfect. But then I export it and it's hazy and out of focus looking. I've tried exporting it as a psd, then opening it in ps and changing it to jpeg....it's a TAD more clear...but nothing like it is in lightroom. All of my settings are set like they "should" be as far as I know. jpeg, 300ppi, quality is at 100... all of that.Â
Â
Here's a screenshot of what it's doing...  (the one on the right is in lightroom and the left is the opened jpeg after I export it)
I work with lightroom for wedding photo. I use Book Module to prepare lay out of the final book.
Â
When I put images in a book they are sometimes cropped by the specific page lay out.
Â
I don't use the printing service of Lightroom, instead I prefer to send the files to my local printing service and then stick them to an album (wedding stuff).
Â
Is there a way to export cropped images from a book?
Is it possibe to return to a RAW image and edit it once I've exported it to another location as jpeg?
I've edited and exported an image to a different folder on my desktop. I've realised I still need to do some work on it
but when I try and open it again in Lightroom ( I see it in Library)Â I get a mesaage saying file not found...
I want to export images from LR. But when I nominate a size - eg. portrait 5x7", images that are in landscape are resized incorrectly.
View 2 Replies View RelatedWhen I try to export an image without LR adjustments (original or copy) from LR5 to Photoshop CC, I get this message: "Adobe Photoshop CC cannot be opened because of a problem. Check with the developer to make sure Adobe Photoshop CC works with this version of OS X..."
I'm running 10.8.5 on an iMac and have the latest updates of Photoshop CC and LR 5 installed.
Exporting large file sizes. In short I'm trying to export some images for large format printing but am having trouble preparing the right size in LR4.
Â
Specifically I'm trying to produce w 30" x h 20" images. I understand that to do this I'll need a image that is 9000 x 6000 pixels set at 300 ppi. My problem is that when I export this, with the dimensions set to width and height in pixels and resize unchecked LR4 produces an image that is 9000 x 4887?
Â
what i'm doing wrong here? Is it simply that the aspect ratio of image is wrong to produce this size image? My concern is not producing an exact file size for printing.
I have 9 separate files/folders of images on my drive in LR . I want to save (export) the images to one CD, keeping the images in the 9 separate files as named in the hard drive. How do I do this?
View 1 Replies View RelatedI'm trying to export images with lightroom but i need to have exact final dimension(s). I mean, may be I need *exactly* 1920x1080 or 1920x1200 pixel final jpg dimensions, so i need a way for having automatic black borders added to the image if it does not match proportions - as you probably have understood images have to be shown on different screen/monitors and I have troubles with automatic zooming fitting and proportions. ?
Â
I can't do photo by photo due to the fact i have hundred(s) of images to export.
I use the Lightroom 4.1 export feature to export my HDR panorama images as 16 bit tiff in a temporary folder and after that to open the images automatically in PtGui Pro 9.1.x. The problem is if I export more than 25 images PtGui Pro starts one time for the first 25 images, then a second time for image #26 till 51, and so on. This happens during all my test with multiple image formats like 8 bit tiff with/without compression or with jpegs. It makes no difference whether the temporary folder is located on an SSD or a regular hard drive.
Â
Additional I tested LR4 Export to Hugin 2011.4.0 (32Bit) and Gimp 2.8 (64Bit) and the result is the same like with PtGui Pro: After the 25th image a new instance of the program started.
Â
Because of this behavior in different programs, I must assume that the fault must be with Lightroom. Is there any hardcoded limits by handover of pictures to external programs?
Â
(Windows 7, Lightroom 4.1 and PtGui Pro 9.1 are 64 Bit versions)
If not, is there a plug in that would do that? I need to select, then combine photos from different catalogues into a new one.Â
View 2 Replies View Relatedi'm new to all of this and i've got a couple of questions. i'd like to export (from lightroom 3) a file of a little over 100 images for proofing by a client. a) i'd like them watermarked on the website i send them to --how do i do this? and b) how do i remove the watermark on the images that i have that i want to make prints from? i'm terrified of doing something that i can't take back and ruining the photos.
View 5 Replies View RelatedI loaded some old, saved images I have on disk to Lightroom. When I attempt to export the image to email, the command states It can't locate the mage, even though I am looking at it.
View 2 Replies View RelatedIm shooting Nikon D5100 and D3200 cameras. Im recording GPS data with a Nikon GP1. Im shooting jpg FINE and LARGE 6016 x 4000; 24.1M. I need to be able to batch and individual edit the images which Im able to do but after exporting them my GPS data is gone. Im running an iMac with the latest software and LR 5.
View 1 Replies View RelatedI can not upload my files to an online site to design a photo album. Apparently they are too large. Any screen print of how the export should be set to produce a quality 10 x 10 album and will upload in a reasonable time frame?
View 9 Replies View RelatedI want to extract the metadata I have added to my images and export it into an Excel spreadsheet. Can this be done within LR4.4? If the software doesn't have a function for this is there another way to do it?
View 2 Replies View RelatedFor example, I often export a folder of full-res images, and then go back and do the same images as lo-res with watermarks, that I export to an "email" folder inside the hi-res folder. That way, I email the little ones for clients to peruse, and then send the full-res after they agree to buy. I know I can set up two presets and do them separately, but thought I'd ask.
View 7 Replies View RelatedI would like to export images from Lightroom into a folder structure LR creates based on the images keyword tree. I have noticed that this might be possible if LR uses collections as a basis for the folder hiearchy it creates but not based on Keword Hierachy.
View 11 Replies View RelatedI have version 4.1 LR on both my home desktop as well as my laptop. I keep my desktop fairly well organized, and it is where I keep my image files for backup.....internal drive backed up onto an external drive.
Â
My laptop is not so organized, and I am trying to clean it up. I use it primarily for a working system, when I'm not home.Â
Â
My folder system on my laptop is different than the one on my organized desktop. Further, I may have image files on one system but not the other.
Â
An example of what I do is as follows: when I am away from home for awhile, I like to try to save my pictures on the Compact Flash card until I get home. And, I also back them up onto my laptop and external portable hard drive as well. Before I get home, I often will use my laptop and LR to edit certain photos. I may in fact create new files when I create HDR images on my laptop.
Â
When I get home, what I usually do is upload as soon as possible those original pictures from my Compact Flash card or external hard drive onto my home system so I have it there, with its backup. However, what I have not been doing is exporting any catalog settings file from my laptop and importing it onto my desktop.
Â
My question is this: if I export a Catalog file from my laptop, without the negatives (images), and if there is a mismatch between the files on my laptop and my desktop, whether that's because of the file structure differences or whether that's because my laptop may have slightly different files on it than my desktop has, will the Catalog settings still transfer properly? For instance, if I have an HDR image on my laptop, along with any Catalog settings, and this HDR image is not on my home network, will a problem or error be created when I import the laptop Catalog file from my laptop without also importing that HDR file? I would think that the catalog settings for that laptop HDR file would be there, but because the HDR file is not being transferred over, perhaps there might be a problem?
Â
I know I should probably get better on my workflow while away from home, but for now, I'm trying to clean up the existing problem that may exist.