Lightroom :: Failed To Export Images With Droplet
Jun 6, 2013
I've Created a droplet and tested it successfully in Photoshop, then I use this droplet by select it in Post-Processing when I export DNG to TIFF in Lightroom, but there's a problem:
1. If PS is not opened when I'm exporting images in LR, the droplet will work well, i'll get an processed TIFF
2. If PS is opened before I'm exporting images in LR, the droplet won't work, then I get an unprocessed TIFF
Due to Situation 1, if PS is not opened when I'm exporting images and I tried to exported 30 images with droplet, finally I'll get only ONE image successfully processed, because PS was opened when LR export the first image.
View 4 Replies
ADVERTISEMENT
May 28, 2009
I have been trying to get Lightroom to execute a PS droplet after exporting a set of images. The droplet runs a set of actions which performs certain sharpening and NR steps. What I've been noticing is that if the number of images is too high, the droplet execution fails. Apparently, if the number of images is past 40-50, multiple droplet commands are passed to PS simultaneously and causes PS to fail. PS cannot execute actions simultaneously on multiple images at the same time. The error returned is "Could not complete the Play command because the action is already playing".
Here is what I've discovered by experimenting with droplets on the command line without LR initiating them:
There is an inherent limitation in the number of characters that can be pass to a command in the Windows OS. That limitation is right around 2048 characters. For example, if I want to pass 30 images to a droplet for execution, the command would look like:
mydroplet.exe c:/path/image1.jpg c:/path/image2.jpg c:/path/image3.jpg...etc
If the total number of characters in this command is more that 2048, the droplet crashes because you have exceeded the string limit of characters for Windows. If your source directory path is long enough like, C:UsersMynameDocumentsMy PicturesTalent Show 2008, each image can use up 50 or more characters within that command. You exceed the limit with just 40 images. My suspicion is that if you export more than this limit, LR breaks up the export into a series of droplet executions by executing multiple droplet commands. I confirmed this because as I increased the number of images exported out of LR, or placed them deep in the directory hierarchy, I can see more and more droplet commands being executed in Task Manager simultaneously. As soon as I pass 40 images, 2 droplets start running, and PS fails due to the error I previously mentioned.
What I don't know is why LR executes them simultaneously? Why not in series so that they will not "clog" up PS?
View 9 Replies
View Related
Jul 2, 2012
I've recently finished a catalog with 700+ images and I'd like to create an index for future use.
I would like to have an action which allows me to save a general purpose size image for e-mailing to customers as well as a thumbnail size image for photo invoices. This I could do normally by making two seperate actions for the two, but there is an issue with the categories of image types.
Within the catalog the images are of products, and thus are related to a brand. I would like to index the images into a brand based folder, and then into seperate folders for thumbnails and general use.
So essentially, the workflow would be something along the lines of
Create New Folder for Brand/ Category
Open Image
Resize for General Use
Save Image As... in Brand > General Use
Resize for Thumbnail
Save Image As... in Brand > Thumbnails
Close
Repeat for all images in category.
Create New Folder for new Brand Category
Open Image
.... Etc etc.
Also, is there a way to select a resizing of an image by it's longest/ shortest edge within an action/ droplet? I know Image Processor has this capability but it seems strange there is no ability within an action.
View 5 Replies
View Related
Feb 24, 2014
I was in the process of moving a folder inside or LR. I might have clicked and moved it twice since it was very slow. LR wasn't able to complete the move and gave me an error message. After I clicked "OK" on the error message, I wasn't able to find my folder/images from the old or new location. I did a spotlight search on my mac, but I wasn't able to find them anywhere. Where has my folder/images gone? I tried to locate them without any success.
View 2 Replies
View Related
Jun 25, 2013
I want to move AutoCad LT 2012 to a new PC.When starting the License Transfer Utility I can login but when clicking export I get.
The maximum number of exports for this serial number has been reached. You may not export more licenses than you have purchased.Click the "Try Again" link to resubmit the request.
View 5 Replies
View Related
Feb 13, 2014
I have an action that opens a raw file, corrects for wide angle, and saves with same name. However when I run the droplet (created from it) I get:
Unable to Export: The destination folder for this operation is missing.
/Users/juandent/Pictures/Lightroom Exports/corrected with droplet/Users/juandent/Pictures/Lightwoom Exports/
View 1 Replies
View Related
Oct 22, 2005
I keep on getting this message when I'm copying and pasting it says "Clipboard failed because it is too big to export"
I am using Adobe CS2 on a Mac G4 running 10.4 Tiger with 2 Gigs of ram.
View 7 Replies
View Related
Oct 20, 2013
I finished a project yesterday only to find that LR4 did not save any of the changes to my images.
I checked my second computer and it works fine but for some reason my laptop LR4 is not saving the edits to my images. I open the subfolder for LR images and they are untouched.
other than using my second computer! My workflow is set up to edit on Laptop and do bookeeping on my PC.
View 2 Replies
View Related
Nov 20, 2013
I cannot export images from LR to computer. It tells me there is not enough memory, but I have 60gb free
View 3 Replies
View Related
Mar 6, 2012
Since the last update I am having images corrupted (truncated) by lightroom, when I open some files in CS5 i get the message about the file being truncated and then only half the image come up.
If I export the file again from LR it works so it's not the usual card malfunction or import errors, my hard drive is in fully working order and tested with drive sentinal.
View 3 Replies
View Related
Jan 31, 2013
I'd like to export images from Lightroom 4 with a watermark. It COULD be text, but I want to rotate the watermark 30 degrees. I can't see a way to do that in the watermark editor in Lightroom...
Alternatively, I created the watermark in Photoshop, put in the text, rotated it, and saved it as a jpeg. I can't get a clear background. It appears jpeg doesn't support that. SO, I saved it as a .png (jpg and png appear to be the only two formats supported for a graphic watermark in Lightroom). It looks FINE, except in Photoshop the text is WHITE, which is what I want in Lightroom, but every time I open the .png file in the watermark editor in Lightroom, it comes in with BLACK text...
How do I get a Lightroom export watermark with the text I want in the font I want, angled the way I want?
View 5 Replies
View Related
Feb 21, 2014
I have LR 5.3 and everything has been working fine. Now I cannot export more that 5 images even though I have checked my registration number and it is correct.I am using Windows 7, 64 bit.
View 6 Replies
View Related
Jul 8, 2013
I cannot export images after processing in Lightroom 5 (the newest version). See the message on top.
View 2 Replies
View Related
Feb 27, 2013
Lightroom 4.3 no longer exports photos correctly.
Error Message is :- Unable to Export :- an internal error has occurred; WIN32 API error 2 (the system cannot find the file specified) when calling ShellexecuteExW fromAgWorkspace.shellexecute.
Photos are exported, but without the EXIF data?
I have tried uninstalling and reinstalling Lightroom. I have also tried Restoring Win 7 to an earlier build, but with no success.
View 2 Replies
View Related
Feb 20, 2014
I edit an image in Lr5, and it's crips and perfect. But then I export it and it's hazy and out of focus looking. I've tried exporting it as a psd, then opening it in ps and changing it to jpeg....it's a TAD more clear...but nothing like it is in lightroom. All of my settings are set like they "should" be as far as I know. jpeg, 300ppi, quality is at 100... all of that.
Here's a screenshot of what it's doing... (the one on the right is in lightroom and the left is the opened jpeg after I export it)
View 6 Replies
View Related
Dec 4, 2012
I work with lightroom for wedding photo. I use Book Module to prepare lay out of the final book.
When I put images in a book they are sometimes cropped by the specific page lay out.
I don't use the printing service of Lightroom, instead I prefer to send the files to my local printing service and then stick them to an album (wedding stuff).
Is there a way to export cropped images from a book?
View 5 Replies
View Related
Nov 24, 2013
Is it possibe to return to a RAW image and edit it once I've exported it to another location as jpeg?
I've edited and exported an image to a different folder on my desktop. I've realised I still need to do some work on it
but when I try and open it again in Lightroom ( I see it in Library) I get a mesaage saying file not found...
View 3 Replies
View Related
Nov 14, 2012
I want to export images from LR. But when I nominate a size - eg. portrait 5x7", images that are in landscape are resized incorrectly.
View 2 Replies
View Related
Nov 16, 2013
When I try to export an image without LR adjustments (original or copy) from LR5 to Photoshop CC, I get this message: "Adobe Photoshop CC cannot be opened because of a problem. Check with the developer to make sure Adobe Photoshop CC works with this version of OS X..."
I'm running 10.8.5 on an iMac and have the latest updates of Photoshop CC and LR 5 installed.
View 1 Replies
View Related
Oct 1, 2013
i have a set of prints (4 seperate files) and when i try to eport them to pdf, i get a error stating:
Job: - Error(s) Did Not Plot
Job ID: 1
Sheet set name:
Date and time started: 9/25/2013 7:05:02 AM
Date and time completed: 9/25/2013 7:05:03 AM
UserID: X.X
Profile ID:
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: B-0193-1-Model - Error(s) Did Not Plot
File: Z:EngineeringPRINTSBPRINTSB-0193-1.dwg
Category name:
Page setup:
Device name:
Plot file path:
Paper size:
ERROR: Internal Error: Failed to get Plot Settings Dictionary.
The file was originally created with Autocad 2010 in 2011. i would post the file but it is a customer print and i cannot disclose it here. we are now running up-to-date autocad 2013. this is not a problem with other files i have had to work with (older and newer). just seemds to be a localized event and am wondering if it is that something is corrupt.
View 4 Replies
View Related
May 11, 2011
Get a message "Failed to export desel table" when i try to create an iPart, i have excel installed.
View 4 Replies
View Related
Apr 17, 2013
Exporting large file sizes. In short I'm trying to export some images for large format printing but am having trouble preparing the right size in LR4.
Specifically I'm trying to produce w 30" x h 20" images. I understand that to do this I'll need a image that is 9000 x 6000 pixels set at 300 ppi. My problem is that when I export this, with the dimensions set to width and height in pixels and resize unchecked LR4 produces an image that is 9000 x 4887?
what i'm doing wrong here? Is it simply that the aspect ratio of image is wrong to produce this size image? My concern is not producing an exact file size for printing.
View 15 Replies
View Related
Jan 30, 2014
I have 9 separate files/folders of images on my drive in LR . I want to save (export) the images to one CD, keeping the images in the 9 separate files as named in the hard drive. How do I do this?
View 1 Replies
View Related
Mar 19, 2013
I'm trying to export images with lightroom but i need to have exact final dimension(s). I mean, may be I need *exactly* 1920x1080 or 1920x1200 pixel final jpg dimensions, so i need a way for having automatic black borders added to the image if it does not match proportions - as you probably have understood images have to be shown on different screen/monitors and I have troubles with automatic zooming fitting and proportions. ?
I can't do photo by photo due to the fact i have hundred(s) of images to export.
View 10 Replies
View Related
Jul 26, 2012
I use the Lightroom 4.1 export feature to export my HDR panorama images as 16 bit tiff in a temporary folder and after that to open the images automatically in PtGui Pro 9.1.x. The problem is if I export more than 25 images PtGui Pro starts one time for the first 25 images, then a second time for image #26 till 51, and so on. This happens during all my test with multiple image formats like 8 bit tiff with/without compression or with jpegs. It makes no difference whether the temporary folder is located on an SSD or a regular hard drive.
Additional I tested LR4 Export to Hugin 2011.4.0 (32Bit) and Gimp 2.8 (64Bit) and the result is the same like with PtGui Pro: After the 25th image a new instance of the program started.
Because of this behavior in different programs, I must assume that the fault must be with Lightroom. Is there any hardcoded limits by handover of pictures to external programs?
(Windows 7, Lightroom 4.1 and PtGui Pro 9.1 are 64 Bit versions)
View 4 Replies
View Related
Feb 3, 2013
If not, is there a plug in that would do that? I need to select, then combine photos from different catalogues into a new one.
View 2 Replies
View Related
Dec 8, 2011
i'm new to all of this and i've got a couple of questions. i'd like to export (from lightroom 3) a file of a little over 100 images for proofing by a client. a) i'd like them watermarked on the website i send them to --how do i do this? and b) how do i remove the watermark on the images that i have that i want to make prints from? i'm terrified of doing something that i can't take back and ruining the photos.
View 5 Replies
View Related
Mar 16, 2014
I loaded some old, saved images I have on disk to Lightroom. When I attempt to export the image to email, the command states It can't locate the mage, even though I am looking at it.
View 2 Replies
View Related
Oct 25, 2013
Im shooting Nikon D5100 and D3200 cameras. Im recording GPS data with a Nikon GP1. Im shooting jpg FINE and LARGE 6016 x 4000; 24.1M. I need to be able to batch and individual edit the images which Im able to do but after exporting them my GPS data is gone. Im running an iMac with the latest software and LR 5.
View 1 Replies
View Related
Jan 28, 2013
I can not upload my files to an online site to design a photo album. Apparently they are too large. Any screen print of how the export should be set to produce a quality 10 x 10 album and will upload in a reasonable time frame?
View 9 Replies
View Related
May 8, 2013
I want to extract the metadata I have added to my images and export it into an Excel spreadsheet. Can this be done within LR4.4? If the software doesn't have a function for this is there another way to do it?
View 2 Replies
View Related
