Im shooting Nikon D5100 and D3200 cameras. Im recording GPS data with a Nikon GP1. Im shooting jpg FINE and LARGE 6016 x 4000; 24.1M. I need to be able to batch and individual edit the images which Im able to do but after exporting them my GPS data is gone. Im running an iMac with the latest software and LR 5.
View 1 RepliesI have been using LR4, and am starting to learn Photoshop CS6. I thought I understood that there was not need to make a copy when editing a photo from Lightroom in Photoshop. However, Martin Evening's Lightroom 4 book (page 394 if you have it) states 'once you have converted a photo to black and white in Lightroom and edited in Photoshop, there is no opportunity to go back to the colour original'. He then talked about it being better to create an edit copy version
the original file would be lost in Lightroom. He also suggested that Virtual Copies may not be a good idea - something about if the catalog became corrupted you could lose the Virtual Copies, and it would be better to create a 'Real File'
So if I were to do some edits in LR4, including convert to B&W, then do further work in Photoshop, would it be better, or necessary to create another Edit Copy of the file so I had the original + another original I could then do the work on. And shoulkd I do this on all files
Is it possibe to return to a RAW image and edit it once I've exported it to another location as jpeg?
I've edited and exported an image to a different folder on my desktop. I've realised I still need to do some work on it
but when I try and open it again in Lightroom ( I see it in Library) I get a mesaage saying file not found...
I purchased this resume template online and had no problems saving it as a Photoshop PDF file with the original file.
But once I made my own changes to the resume template, as seen below I kept getting the "I keep getting the error "Preserve photoshop editing capabilities" is incompatitable with earlier versions of Phootshop. In earlier versions, you must open the PDF as a Generic PDF (not as a Photoshop PDF)" whenever I save my file as a Photoshop PDF.
I'm using Photoshop CS6 on a Macbook Retina Display. I made sure I checked the "Layers" in the "Saved As" dialog, so not sure why its causing my Photoshop PDF files to look faint.
I have Photoshop 10.0 (Windows XP) and use it to edit my photos from my new Nikon D300 camera. I create and maintain my images in JPG format. My D300 includes 40 to 50 camera info/metadata elements including the camera and lens settings at the time the photo is taken.
When I do a simple "Save As" in Photoshop 10 to a new JPG file (whether image adjustments are done to the source image or not), the new JPG file is stripped of about half or more of the original metadata. Is there a Photoshop setting or plug-in that will force the software to preserve/retain the original metadata?
One of P&GD2013's new features was supposed to be preservation of EXIF data when editing JPGs. I'm having trouble discovering when this happens.
For instance, when I open a photo, use MagicErase to remove a lamppost, flatten the group and then export/save it back to the original, all my efforts so far have resulted in the loss of the original EXIF data.
Is there a way to preserve EXIF data after editing (in any way) the original photo?
I have a around 500 cdr(corel draw ) files, and each pages have around 20 images in it.
so what i do. select every single image on the pages then using convert bitmap option to save them on my computer. That consume my whole time in saving them to my computer.
Is there any fast option available to select all images at once and convert to bitmap 20 images and save in a number say 1,2 ...20
Is there a way to preserve curves on DXF export in CS5? At the moment it is converting to lines which is not good for me.
View 5 Replies View RelatedJust updated to LR4.1 Win and working on GPS features.
There is that cool GPS tracklog import, but I am really missing a GPS data export! I would like to have the opportunity to mark some pictures and export a track list from that information to file.
when i attempt to export, all editing that was performed in the DETAIL portion gets undone. my images become grainy just as the original RAW file. is there something i am missing here when exporting? do i have to change the RAW file after editing before i can export?
View 4 Replies View RelatedI have a number of wildlife photographs that I would like to make available to staff for field identifications. They do not have access of LightRoom or CS5. Is there a plug-in or other software that can capture the key words and EXIF data and make it available thru MS Access or Excell?
View 4 Replies View RelatedI've just uploaded a picture to my Flickr photostream from within Lightroom 4 release version (Win 7 64 bit). I geotagged the picture in Lightroom's new Maps module and the image shows GPS co-ordinates in the Metadata panel in the Library module.
The photo on flickr has no GPS data and does not appear on the map in Flickr. I've downloaded the original version of the picture from Flickr and opened in the GeoSetter tool, which confirms that no GPS data is embedded in the JPEG file.
In Lightroom 4's "Publish Services" section Flickr does not have the "Remove Location Info" setting ticked under metadata.
EDIT: I've just tried to export a picture using the normal export button in the Library module. In this dialog box "Remove Location Info" was ticked. I unticked it and exported and can confirm that GPS data is successfully stored in this image. It just doesn't seem to get to Flickr using the built-in publishing service for some reason.
I shoot pictures in RAW (Pentax PEF format) which includes gps data. As the pictures are being imported the Lightroom prompts for reverse geo mapping and detects the data and locates it on the map from map module. However, when exported in JPG, the GPS is missing in the Exif. It was working in 4.1. Again, it did not work sometimes in 4.1.
View 2 Replies View RelatedIf I import my raw images into my Lightroom 5 library and edit some of them in CS6 within Lightroom 5 by using the tab. How can I save them from CS6 back into my Lightroom 5 Library after making further adjustments?
View 9 Replies View RelatedI had a problem exporting editing images to DNG. Lightroom will only export the original unedited versions to DNG. If I export to JPG I get the edited versions, but it will not export the edited versions to DNG.
View 5 Replies View RelatedHow do you make your own lightroom pre set for editing images? so when you have a lot of images, and then you can select them and apply the same pre set.
View 1 Replies View Relatedwhen importing my raw images into lightroom4 they are automatically editing how do i change this?
View 17 Replies View RelatedIn Lightroom 3.6 (which I just upgraded to from 3.5), I noticed that when I export photos with the option "Minimize Embedded Metadata" CHECKED, the exported JPG images have no EXIF data at all. This was not the case in 3.5.
View 4 Replies View RelatedI'm now switching from Aperture to Lightroom. But now I've big troubles with my geotagged images (+40'000) I export my photos with a seperate XMP files. In Bridge is see the GPS-Tag but when I import the photos in Lightroom then the location isn't imported!
Why isn't the GPS-Coordination not included?
Importing images into lightroom 3.6 shows
1. The expected number of of frames .... but all are blank
2. The correct listing in the library index
3. The data for each image shown in the development mode ... as is the spectrum graph
I am using an up to date version of Win 7.
i've managed to fill my mack up with images as i imported all my photos to the MAC HDD rather than an external HDD,,,school boy error : (but i am new to lightroom) as there's 30,000+ is there a way of moving them with out having to reload them to the new HDD? i only found out my mistake when the computer was running on 1% memory.
View 3 Replies View Relatedhow it deals with cropped images. I have the following edited image, cropped to some specific region:
Then, I tell lightroom to edit this image in Photoshop CS4:
However, once it hits photoshop, it has magically gained more image data than I told Lightroom there should be:
Somehow, all the development settings are correct, but the crop has too much data.
How do I reduce my catalogue without losing the data attached to images?
View 18 Replies View RelatedLR4 final seems to have a very annoying bug.
When I select a number of images (in the film strip) and either
1) paste settings that I've previously copied from another image or
2) sync settings from one image to the rest
... the settings are not applied to all the selected images. The settings are only applied to a seemingly random subset of the selected images.
I'm going to try to pin down the exact circumstances that make this occur.
[URL]
I've tried this several times, but it doesn't work. Lightroom CC will import metadata and even star ratings, but it won't import the color label data assigned to the images from within Bridge. How can I get that information to be imported?
In other words, working in Bridge CC I assigned star ratings and color labels to a folder full of JPG files. When I import those files into Lightroom CC, the images, metadata and the star ratings are imported, but no color label data was imported. None of the images have color labels when viewed in LR. They still retain the color labels when I view the files in Bridge CC, but they don't appear in LR.
I am currently using Lightroom 4.4
Recently I have been asked for certain images taken in 2011.
When searching for them I have discovered that the original capture information has been "gone missing / become lost".
For clarity, the information I'm referring to is the ACTUAL capture date and time of the original image as appears in the raw file metadata.
This data no longer appears on ANY of the subsequent version of any image taken in that year whether PSD or Jpeg.From checks already carried out, the data remains on the original RAW files.
All other years are OK.How can I transfer the date & time of the original image capture from the raw file to subsequents copies (PSD / Jpegs etc)? As literally hundreds of images are involved, is there a bulk routine that I can perform to synchronise this data?
Is there a way to export text from InDesign to Photoshop and preserve the type as editable text in an area text box, similar to the export to PSD in Illustrator? Designed many web site pages in InDesign, and now need to covert all pages over to Photoshop quickly.
View 4 Replies View RelatedI finished a project yesterday only to find that LR4 did not save any of the changes to my images.
I checked my second computer and it works fine but for some reason my laptop LR4 is not saving the edits to my images. I open the subfolder for LR images and they are untouched.
other than using my second computer! My workflow is set up to edit on Laptop and do bookeeping on my PC.
I cannot export images from LR to computer. It tells me there is not enough memory, but I have 60gb free
View 3 Replies View RelatedSince the last update I am having images corrupted (truncated) by lightroom, when I open some files in CS5 i get the message about the file being truncated and then only half the image come up.
If I export the file again from LR it works so it's not the usual card malfunction or import errors, my hard drive is in fully working order and tested with drive sentinal.
I'd like to export images from Lightroom 4 with a watermark. It COULD be text, but I want to rotate the watermark 30 degrees. I can't see a way to do that in the watermark editor in Lightroom...
Alternatively, I created the watermark in Photoshop, put in the text, rotated it, and saved it as a jpeg. I can't get a clear background. It appears jpeg doesn't support that. SO, I saved it as a .png (jpg and png appear to be the only two formats supported for a graphic watermark in Lightroom). It looks FINE, except in Photoshop the text is WHITE, which is what I want in Lightroom, but every time I open the .png file in the watermark editor in Lightroom, it comes in with BLACK text...
How do I get a Lightroom export watermark with the text I want in the font I want, angled the way I want?