Premiere Pro :: Corrupted JPEGs - PDFs - TIFFs And / Or Still Images
Dec 10, 2013
Since I switched to Mavericks... premeire Pro CC has been corrupting my still images. I have imported them a dozen different ways to no avail. I have clean wiped my computer... ditched the CC suite and redownloaded it. Nothing works to correct the issue. I even bought a solid state HD and upgraded my graphics card.Â
Â
What is happening is half of the pictures information is lost. Each picture has a slightly different corruption but I can see the image fine if I scrub through my timeline. Its only when I hit play or pause over the clip that I see the corruption.Â
Early 2009 Mac Pro
Processor 2 x 2.26 GHz Quad-Core Intel Xeon
Memory 16 GB 1066 MHz DDR3 ECC
Graphics AMD Radeon HD 7950 3072 MB
View 2 Replies
ADVERTISEMENT
Dec 5, 2008
I've got a folder with about 200 pdfs in (all single pages as I've split them as such). What I want to do is set up an action that opens them in photoshop, converts them to a bitmap and saves them as a TIFF. Easy right? Nope.
I've set this up by recording the action. What happens is it opens all the files in turn and changes them to bitmaps as I want, but when it saves them, it saves them all with the same file name, which is the name of the first one (the one I recorded the action with), this means it keeps replacing the first file.
what I want it to do is to save each file with it's own file name!
View 1 Replies
View Related
Sep 19, 2012
im having problems with saving my tiff files and converting. once i convert them to jpegs to email or go to the printers, they are changed and are washed out as if the org tiff before editing. when i open on my comp they are ok but when emailed to someone or once printed are destroyed. i dont think is my colour management as org jpegs files are fine. below are some details of the process.
i open my file (pro photo RGB, 16bit, 3888x2592 10.1MP) i edit the photo. if saving in jpeg i change to 8bit and save with the embedded colour profile button clicked.
View 2 Replies
View Related
May 12, 2004
I have a couple dozen large-ish TIFFs that I need to convert to JPEGs...is there a one-time "Save As" command that will convert all, without having to repeat the "Save As" command for each, one at a time?
View 1 Replies
View Related
Sep 26, 2013
I shot loads of images as jpegs as requested. Now the customers says actually I'll need them in TIFF!! As the shoot went on I exported the images to 34 folders with 56 subfolders containing 751 jpeg images. I now need to supply exactly the same but with TIFFs. Now I still have the raw files in my C: and it would be lovely to simply re-import them and export them as TIFFs but without looking at every single raw file and finding where ever the corrosponing jpeg is I have no way of exporting the new TIFFs to sit alongside their jpeg counterparts, if you see what I mean? Is there anyway I can utilise/batch process the raw files and export them to right folders as TIFFs?
View 12 Replies
View Related
Jan 4, 2013
When I was using Elements 8, I could easily edit jpegs and tiffs in the Photoshop Raw interface.  (I know that's not the same as an image originally shot in Raw, but nevertheless it was very useful in some situations.) Now I'm using Elements 10, and either I've forgotten how to do it, or it can't be be done.Â
View 5 Replies
View Related
Apr 24, 2012
I have many PSD files from photoshop – with layers, masks, adjustment layers, nested groups, smart filters, layer styles and editable text at 600dpi with embedded color profiles. The idea is to import them all into lightroom and make a book.
Â
Should I flatten the files and make them into tiffs or jpegs?
Does it make sense to keep them at 600dpi or Blurb will downsample them to 300 anyway? (if so I would rather do it myself, if not is there an option to control the output resolution?) What happens to color? – How do I ensure the best match between what I see on the screen and what the book will look like?
View 1 Replies
View Related
May 22, 2013
When I change my TIFFs to jpegs, the color and tone are changing as well.
View 2 Replies
View Related
Jul 21, 2006
I have a weird problem with Photoshop CS. When I double-click on a tiff, jpeg, or Photoshop file it launches the program, but it won't open the image. In order to do that I must go to file and choose open. This is much more trouble. I can't figure out why. My photoshop guru friend couldn't figure out why. Any ideas?
Also, and this may or may not be related. When I open the program I get the following message: For Photoshop UI to display correctly, open System Preferences, click General, and turn off text smoothing for font sizes 8 and smaller.
The weird thing is, when I did what message suggested, I discovered that there was no "text smoothing" option to turn off under Preference (under General) in Photoshop. There is no General in the computer's System Preferences, so I'm assuming the message refers to Photoshop Preferences.
View 3 Replies
View Related
Mar 21, 2012
What Acad2010 or Trueview 2012 uses to create it's bacth PDF's? Â We got a new plotter last week and it seems to have corrupted that driver somehow. Â We are no longer able to create batch PDF in either Acad or Trueview. Â We using both Win XP and Win 7 machines. Â I don't know if the plotter had anything to do with this problem it just seem that this happend the same time as we installed the plotter. Â I can use a 3rd party PDF maker to make individual PDF but this takes time, the batch PDF is much more useful for me. Â I'm hoping I can get the generic PDF driver that autocad uses and reinstall that, but I don't know what it is or where I can find it.
View 6 Replies
View Related
Jan 3, 2014
I got this message when trying to load a WIP file: "The project could not be loaded, it may be damaged or contain outdated elements."
Â
I've searched the forums as well as on other sources on how to deal with it. So far I've tried:
Â
1. Check files on AutoSave folder. No luck. All 5 files gave the same message
2. Fix XML with XML wrench. Tried the "Check is Well Formed" & "Check is Valid" and both said ok"
3. Restarted PC. Same thing.
4. Move project and working files to other folders - same.
5. Created a blank project and tried to import sequence - no sequence show up.
6. Import from After Effects and Exported - no luck as well. Came up with a message saying there's no valid sequence.
Some info:
Adobe Premiere Pro 6.0
Windows 7 64bit
Â
Using Plural Eyes plugin
View 8 Replies
View Related
Nov 26, 2013
I am using Photoshop Elelments and Premier 9 and cannot open a number of my previous jpegs. How can I correct this?
View 6 Replies
View Related
May 5, 2012
How do you import four separate images( four separate TIFFs) into four channels?
View 3 Replies
View Related
Jun 22, 2012
raw images are not opening in photoshopcs5 nor tiffs with light room adjustment from lightroom3.
View 22 Replies
View Related
Jan 8, 2014
In a project i'm working on I have two large jpegs with a small zoom scaling effect. Going from 100 to 103 percent.
I've noticed that both Adobe Media Encoder and Premiere Pro experience a heavy slow down in render time as soon as the jpegs have to be rendered. Not only does the render speed almost come to a halt, the complete system lags very heavy, even the mouse cursor won't respond well.
Â
This happens when i have GPU acceleration enabled and when i do a 2 pass H264 encoding. When I have the GPU acceleration disabled the render goes very smooth, and doesn't seem to slow down...
Â
The jpeg is 4023Â x 2677, and 6,97 MB large.
Â
Scaling the jpeg down to about 1920x1080 in Photoshop and put that one in the timeline made the render go a lot faster.
Â
I understand that a large picture takes a bit more time to be rendered, but we're talking about a 10minute render whit the large jpeg file and a 2 minute render with the jpeg resized. The total time of the two jpegs in the video is 5 seconds in a 3 minutes video. So, that made me think that the render times are exponentially long.
Is this considered normal, I can't remember having such big differences in CS5.
My system:
Â
 Premiere Pro CC (latest)
i7 4930K
32 GB RAM
2xGTX480Footage and project on a Raid0 disk
Previews/Cache on a Raid0 diskSystem and Premiere on SSD
Render to a single 7200 rpm drive.
View 3 Replies
View Related
Apr 23, 2011
So, I have used Gimp to downsize large architectural drawing images from Tiff's to jpgs. Well, I always thought I was downsizing them. In the past, the process always seemed to make the files more usable in the application where I need to use the architectural drawings without a significant loss in quality.
I will open a tiff in Gimp, save as jpg, export if prompted, then select quality of 40 or 50 percent, and the result is a usable file that is significantly smaller than the source tiff file.Today, the source tiff which is 900 mb in size is being converted to jpg which is 6 or 7 mb in size, totally unusable.
Additionally, if I simply open the source in Gimp, save it to another directory from Gimp without making any changes, the file also grows to 6 or 7 mb. What am I doing wrong this morning that I have not been doing wrong for the last 6 months?
Using version 2.6.11 in Ubuntu 10.10 if that matters.I have a version of 2.7 on my Windows XP OS, and it will lock up trying to open these drawings.
It's curious, because, at 900 MB, I typically can use the drawings without even altering or downsizing them.What I really cannot understand is why Gimp is causing unaltered files to grow in size when saving them.
View 8 Replies
View Related
Apr 5, 2009
I just installed CS4 and when I open any image it either has a weird screen over it or a bunch of triangles, some black and some from the image. Doesn't matter what type of image. I tried removing cs4, turning off virus protection and reinstalling but same problem. CS3 and Lightroom 2 work fine. Images look OK in Bridge. Running Windows Vista 32 bit, 3MB RAM, Intell Core Duo 2 CPU, ATI Radeon Graphics HD 2600 XT Processor and I did look for the latest driver update in the graphics processor. Doesn't matter at what size I view the image--it just changes the type of corruption I see.
View 1 Replies
View Related
Mar 6, 2012
Since the last update I am having images corrupted (truncated) by lightroom, when I open some files in CS5 i get the message about the file being truncated and then only half the image come up.
Â
If I export the file again from LR it works so it's not the usual card malfunction or import errors, my hard drive is in fully working order and tested with drive sentinal.
View 3 Replies
View Related
May 16, 2012
I have to get to my printer ASAP with these images and i am having issues with a memory exception error, i have tried different computers to no avail, i have attached the .xar file and i need both images exporting as 300dpi jpegs. the images in the file are at 100% size but i can also live with 50% 300dpi jpeg exports.
the black background is C35 M35 Y35 K100 (rich black) and i have converted all fonts to shapes won't need the fonts. Both images use the 'speedometer' graphic as a clip view
View 9 Replies
View Related
Jan 2, 2014
i´m having a problem opening a premiere pro cs6 project from another computer. My partner can open the project in her computer, but when she sends me the project by mail and i try to open it in my computer i I get t the mesasage " Cannot load project". I´ve tried importing the project into another project but it doesn´t work.
View 2 Replies
View Related
Aug 18, 2011
I have a file that will only be printed using one plate for black ink. The style mimics a newspaper, so there is lots of black text and then a few images.
I converted the images to RGB black and white in PhotoShop and placed them in the Corel file. When I export this as a PDF, of course traces of CMY show up in the PDF, so the printer would like them to be true grayscale.
I tried converting the images to grayscale in PhotoShop and replacing them in the Corel file. There is no visible difference in the files onscreen in either PS or CD. When I export to PDF or EPS, the images become washed out and flat, though the text remains a true black. If I try exporting a grayscale PDF or EPS from the original Corel file with the RGB images, then the images are less washed out, though still not ideal, but the text is no longer a true black. I also tried printing to PDF with PDF Creator, and I have the same problem.
I have a workaround (export as TIFF, select all except the images and bring the text back to true black, then export as PDF), but this seems nuts. What I really don't understand is why the RGB images and grayscale images would export so radically different when they look identical in PhotoShop and in Corel Draw.
View 11 Replies
View Related
Jan 14, 2013
OK, I'm creating a tradeshow graphic for a client. I designed the whole thing in Illlustrator CS6. But for the proof, I used a low res image of the sky (before we purchased it). Everyone was happy. It was a low-res RGB image imported into Illustrator, then the whole thing was exported as a pdf.
Â
Once they approved it, I purchased the high res image. RGB. Same image... just high res. I popped it into the Illustrator file and exported it in exactly the same way. But now, the image looks much more purple. The low res pdf showed it as much brighter, lighter blue.
Â
My client prefers the lighter blue. When I look at the two images in Photoshop, they look the same (in terms of color). should I be worred? Why is there such a color difference?
View 4 Replies
View Related
Nov 15, 2013
I'm having trouble saving my image as a jpeg.i get an image in photshop to where i really like it and then i go to save it and it ruins it. The jpeg doesnt even look like what the image did before i edited it in photoshop.
i'm in color mode sRGB and i try to save it as a value of 10 and progressive.
View 2 Replies
View Related
Dec 31, 2013
I have started to capture only RAW images from my Sony NEX 7 camera. However, I wish to be able to send JPEG images to my friends ( prior to RAW editing ). How do I convert/copy my RAW images to JPEGs using PSE 11?
View 2 Replies
View Related
Feb 11, 2014
I am now unable to import any Raw or jpegs images into Lightroom. I have un-installed Lightroom 4 and then re-installed Lightroom 5 and still no luck. When I hit import I get a message that says "Unble to import a file to the requested location"
View 1 Replies
View Related
Sep 15, 2012
When I save my .PSD files as .JPEGS the colour of the images change drastically.
View 1 Replies
View Related
Mar 17, 2007
i did all my images, layout and text with photoshop... so i started slicing the images into jpegs and text blocks... now my problem is when i select no image in the slice tool and it ask to enter the text it messes up the whole page.. and it puts a white background on it... how do i get rid of the white background? (the text is over color) and also how do i prevent it from pushing all the other stuff over and messing that up?
View 1 Replies
View Related
Feb 27, 2014
I want to batch convert the above. I know i can convert one image at a time. If not can one recommend a batch conversion program which is safe to use and free from viri and malware.
View 2 Replies
View Related
Jun 29, 2004
i am trying to do is add multiple images/pictures/jpegs to a single file/document of photoshop...
I don't want to use the cut/paste thing...how do i simply add multiple images to a document i already have open?
View 1 Replies
View Related
Apr 8, 2014
In an HDV project in CS5 Premirer Pro, I am importing images from a source file into the project window and then onto the timeline. These are separate jpg images, each one with a different filename albeit the first three letters of the filename are the same. When the images are imported, although the filenames are as they appear in the source folder, the actual images are all identical - usually to the first image in the group. It makes no difference whether I import the images separately or as a group - the same problem persists. I have tried clearing the media cache and re-starting the computer. No use.
View 1 Replies
View Related
Mar 3, 2014
After going back to some Premiere Pro projects which contain a lot of graphics (PNG files) they don't display as the images, they display as text, which is the first font avalible in my font selection with the word 'LOGO' I don't know why this happens and other than re importing all the PNG's again i don't know how to correct this.
Â
Admittedly the file locations have changed but when opening the project I am prompted to locate media, which i do, the media is then found with no problems. The media is also present at the correct points on the time line, but it's the same logo problem.
Â
[URL]
View 3 Replies
View Related
