Photoshop :: Images All Corrupted On Screen In CS4
Apr 5, 2009
I just installed CS4 and when I open any image it either has a weird screen over it or a bunch of triangles, some black and some from the image. Doesn't matter what type of image. I tried removing cs4, turning off virus protection and reinstalling but same problem. CS3 and Lightroom 2 work fine. Images look OK in Bridge. Running Windows Vista 32 bit, 3MB RAM, Intell Core Duo 2 CPU, ATI Radeon Graphics HD 2600 XT Processor and I did look for the latest driver update in the graphics processor. Doesn't matter at what size I view the image--it just changes the type of corruption I see.
I am trying to use Video Studio Pro X2 to create a DVD on my new Windows 7 PC. I have produced the project file (95 minutes) and am now ready to burn the disk. I have used the software before on my old PC (Windows XP) with no problems. From the "Share" menu I selected Create Disk and DVD.
I am trying to amend the Project Settings in order that the project file (lasting 95 minutes) fits nicely on a 4.7Gb Disk. I have set-up a Disk Template (which should hopefully produce a file about the right size) and want to select that template for my project. The problem I am having is that when I select Create Disk, the Project Settings button is not displayed, so I cannot select the template I have set-up. The Project Settings button should sit just to the right of the Settings and Options button on the bottom left of the screen, just under the main panel (according to page 146 in the manual), but on my screen (see image attached) all I can see is the Settings and Options button, and then a half-obscurred "Next" button (which should sit on the right of the page, but on my page it is on the left, partly hidden by the Settings and Options button). There is also no "Close" or "Change Display aspect ratio" buttons visible too, which are shown in the manual, but don't appear on my screen.
This is the first time I have used VS Pro X2 on my new Windows 7 PC - it worked fine on my old XP machine and I have never had this problem before. I am now using Windows 7 (64 bit version). I have tried doing a "Repair" to Pro X2 using Control Panel, but this has made no difference...I am still getting this corrupted page without the very button I need to change template. Any way I can create a file that is about the right size to fit on a 4.7Gb blank Disk.
Since the last update I am having images corrupted (truncated) by lightroom, when I open some files in CS5 i get the message about the file being truncated and then only half the image come up. Â If I export the file again from LR it works so it's not the usual card malfunction or import errors, my hard drive is in fully working order and tested with drive sentinal.
Since I switched to Mavericks... premeire Pro CC has been corrupting my still images. I have imported them a dozen different ways to no avail. I have clean wiped my computer... ditched the CC suite and redownloaded it. Nothing works to correct the issue. I even bought a solid state HD and upgraded my graphics card.  What is happening is half of the pictures information is lost. Each picture has a slightly different corruption but I can see the image fine if I scrub through my timeline. Its only when I hit play or pause over the clip that I see the corruption.Â
Early 2009 Mac Pro Processor 2 x 2.26 GHz Quad-Core Intel Xeon Memory 16 GB 1066 MHz DDR3 ECC Graphics AMD Radeon HD 7950 3072 MB
I use Adobe Master Collection CS6, but when i open Photoshop, i don't find the option to have 2 or more images on the same screen on the same time ? Â I never had problems before, and still use Photoshop Extended CS4 with the option into the menu bar !
sometimes when I try and load an image it won't actually appear int he workspace. I can see it in the Navigator thumbnail and it's got a check next to the filename in the Window dropdown, but I cannot see it anywhere nor can I seem to be able to make it appear. Am I missing something or is there a shortcut key to force the image to the center of the screen/workspace? I have the latest Nvidia drivers installed and I've even downgraded to PS running in 32-bit mode, with no better luck. I finally disabled OpenGL which seems to fix the issue. Â I'm on a MacBook Pro, 2.66 Ghz Core i7, 10.7.3, 8 GB of RAM
As you will see from my attached image all of my open images are now sitting outside of the screen. To get them to appear on the screen again I have to hold down the PS logo at the bottom of my screen, which then brings them up as per the image, then click to select an image. This then brings it onto the main screen. But I have to do this with each image individually. How to bring them all up at once? Or how to turn off this feature completely?
When opening an image in Photoshop CS6, in order to make the best use of the available screen area for viewing my photos, I have to either press the 'Fit Screen' option, at the top, or double-click the Hand Tool. Why doesn't the image fully fit in the available screen area automatically, when first opening? Is there a reason for images to open by default with empty space surrounding it, or is it an oversight by Adobe, in how the application works?
I'm a longtime user of PSP 8 and just downloaded the trial version of PSP X5, thinking to buy it. With PSP 8, if I wanted to edit two images on the screen at the same time, I loaded them both into the program and then used the minimize button at the upper right hand of each image to switch them out of full-screen mode and put them next to each other. PSP X5 no longer has the minimize buttons attached to the images. I can tab back and forth from one image to the other, but I can't figure out how to put them both on the screen simultaneously. Is this feature still present somewhere in PSP X5? How do I access it?
I'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4)Â you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
After screen capturing an image, when viewed in the PSPro X workspace, a thin white border shows on the right side and at the bottom.This shows what ever is captured, it wont clone brush or crop out.I have to apply a border to disguise it.
I'm a bit of a Newbie to Paint.net. Is there any way to have multiple images open at the same time on ythe screen -- and to be able to select parts from one image and paste them in another -- that sort of thing?
Illustrator CS6, Windows 7 Â I'm placing screen captures (screen images from software) in my artwork files to add callouts and create illustrations for a user manual. Â The machine I'm capturing on has a screen resolution set at 1920 x 1080 (required for software). I'm using Snagit and capturing the screens, saving files, then placing in Illustrator. I've been using images minimum 300 dpi and never upsizing in Illustrator. Still I think my results could be better. Â In the past I've used .jpg as my export filetype for placing into Illustrator. But, recent reads of postings in this community lead me to believe my practice might be flawed. Â Question: What is considered best practice for placing images from screen capture (or any source) in Illustrator? What file type from capture will get me the clearest and most adaptable results? Â My Illustrator file color mode is CMYK and my other art and callouts supporting the screen cap are working great. Â I'm creating the artwork for import to Framemaker and creating a PDF for online and print.
I make an image 15.8 x 29.8 and when it prints out on my canon 8300 it is only 15.5 x 29.5 actual size measured on the canvas. the image is designed to wrap over the edge of stretchers 15 x29. the pics are 3 tenths inch short!
another pic is 15.5 x 29.25 instead of 15.5 x 29.5 so it is 1/4 inch short the long direction.don't recall having this problem before so why are the images not the same size in print that they are on the screen?
(I use Macromedia Freehand MX), I just recently download the trial illustrator, and my question is to know how to open points in Illustrator images for screen printing in freehand using the Halftone in Illustrator I've tried but is not the same as the finish is different and of very poor quality here is a sample as freehand and illustrator as stated in:
Look at the difference of points:
As you can see in Illustrator can only do that from the menu: Effects / Pixelate / Color Halftone... , not sharp as seen in the picture above and therefore the image does not get to see very well, while in freehand if you can manipulate the points from large fine to a point, points also can be made round, linear or ellipse and therefore may work better for screenprints and other designs that open nesecitan points at home. What I'm interested to know if there is another way to work so that the image is sharp with the open items as well as in freehand.
working on a file, a sketch saved it and opened it many many times with no problems 3 days ago i looked for it but i cant seem to find it on my computer at all.i used a file recovery program just to get it back on my computer.but its now corrupted (could not complete request beacues its not a valid photoshop dcoument) .   tryed many ways to fix it its not working. im ready to try anything just tell me !i don't care if i cant edit or open the file on photoshop all i want is to be able to view it i just want to see it again! thats it.
While working on my Mac on a PBS file (just over 3GBs) it crashed while saving. Now when I open the file, it's a mesh of colors on the screen and only 1 layer and is now only 1.5GB. The file is stored on a WD Myworldbook and I have looked for a way to restore previous files but doesn't seem to be an option. There was no backup file made.
I have had a problem with CS4 crashing. It does not happen at the same point of operation but it does it often. I thought I had resolved this problem recently when I discovered corrupted RAM I have replaced it. Here is the latest crash report.
Process:Â Â Â Â Adobe Photoshop CS4 [49249]Path:Â Â Â Â Â Â Â /Applications/Adobe Photoshop CS4/Adobe Photoshop CS4.app/Contents/MacOS/Adobe Photoshop CS4Identifier:Â com.adobe.PhotoshopVersion:Â Â Â Â 11.0.2 (11.0.2x20100519 [20100519.r.592 2010/05/19:02:00:00 cutoff; r branch]) (11.0.2)Code Type:Â Â X86 (Native)Parent Process:Â launchd [172] Date/Time:Â Â 2012-10-05 10:01:36.856 -0500OS Version:Â Mac OS X 10.6.8 (10K549)Report Version:Â 6 Â [code]....
I`ve just installed Inventor student and I can`t use it at all since I can not see anything in the main screen! I`ve installed, reinstalled and nothing
I`ve attached two screen shots - hovering over the main screen I get the options and data showing like the correct thing is happening - just nothing visible!
I ran into this issue when saving black and white pictures from Raw file. Camera RAw 7.3 opens normally just like always and lets me save picture in color.It lets me save picture in BW, but the JPEG tha comes out is corrupted file that looks like this (see below):
When i try to open that corrupted JPEG in Photoshop 6 I get an error message saying:"The embedded ICC profile cannot be used because ICC profile is invalid. Ignoring the profile. " Â what is causing JPEG to be saved incorrectly?
I recently transferred all my work from a work computer to my mac at home. i am unable to access my work computer until October as we are having a 'break'. However, I have a deadline for September 15th and I need all my files.Some older files open perfectly fine but I fear there was a problem in downloading-perhaps due to my haste to leave and enjoy the beautiful weather! I tried downloading a Remo Repair software but unfortunately this was unable to launch. Â Basic notes:
Created on Windows computer cs5
Trying to open on Mac cs5
Sd card used to transfer-couldn't eject, this may be the problem
I had spent my artwork for many days with so many effort and time, and it has been corrupted after a computer crash (not PSD crash). I am using Windows 7. Â -What happened after: 1 black layer (around 59 MB) -What happened before: Had multiple saves, 15+ layers (so why it is not back to the latest save?) Â I tried: Previews in PSD, Bridge, using recovery programs (none worked), hex editor, searched for temp./restore previous version files (none) how to recover this file.
My computer crashed today while photoshop CS5.1 was saving/writing to a psd file. When I started my computer back up, and tried to open the file again, It only displayed 1 layer shown as a corrupted image (As Shown Below - the Red Image). When I click on the file in the "Open" window (The Gray Image Below), the psd shows up correctly in the Preview window but doesnt show correctly when opened.
I have lost all of my layers, by the way I have worked on this psd for weeks and I need some way to recover it. I have tried "corrupted psd recovery programs", they did not work. I have tried forums - I found no answer. I have tried locating the .tmp file but it is no where to be found.
Does photoshop have a cache or a history? maybe for previously saved versions of psd files? Or does Windows 7, 32 Bit have a file recovery method? I have tried a windows 7 recovery method but it only recovers files from previous restore points that may be weeks old. This is very important that I do my best to fix this psd file or at least recover some layers, I have put in too much time and effort.
Running CS6 Basic on W7-64bit. I'm not a frequent user of CS6, mostly Photoshop Elements does all I need, but I've been reworking the CS5 Classroom in a Book exercises to refresh my CS6 knowledge. Â I've reached the exercise (page 139) where multiple images of a model are merged using File> Automate> Merge to HDR Pro... but getting a weird result in CS6 64-bit. I've tried (resetting preferences, ensuring images are displayed in tabs) but neither has worked. My graphics drivers are up to date as are all Windows updates. Â If I run the same images through Merge to HDR Pro in the 32-bit version of CS6 its perfect.
I'm getting all of my menus corrupted after using CS6 for a couple of hours. See below. . This is happening for all of my windows (Navigator, preferences, etc.) I have to close the program and re-open to fix.  Running Windows7 64-bit. 12 GB RAM with an ATI FirePro V8700 card with 1 GB on it as well. I have all of the latest drivers for the card (installed yesterday). This should be blazingly fast, and it's chugging along like my CS3 used to with 4 GB RAM. Are these issues with speed and the corruption of the menu items related?Â
Lately I've been finding that I've been having lots of corrupted image files -- many of my jpgs and even my psd's have strange bands of colour/image shifts that are permanent, and many of my tif files are now 'unparseable'.  Here is an example of this kind of corruption. Notice the bands of shifted colour and even shifted pixels:  What can be causing this? I'm worried because this is destroying my library of images. I have everything backed up to DVD which is good because I just checked and those files are fine -- so it is some sort of corruption, not software-related.
