CorelDRAW X4 :: Text Fit To Path With Centre Align?
May 24, 2008I want to do the centre akignment of text fiit to path. when i m selecting the text , the alignment is already showing the left aklign as default. it dosent work.
View 6 Replies
ADVERTISEMENT
Illustrator :: Create Centre Path Of Text
May 28, 2013How would you create a path which traces the central path of text. Not an outline path..Or the fill when you create outlines
If you imagine a single line following the middle of text. This would then allow me to place circles on the path to allow me to use for making rhinestone tshirts.
Photoshop :: Align Something To The Centre
Jun 28, 2006Ok I have been trying to figure this out for about half an hour now and its getting me mad because I can't do it.
I have an object on a layer and I want it aligned to the centre of the canvas how the hell can this be achieved I have tried everything surely there must be an option to align it?
Photoshop :: Align Text To Path
May 19, 2004i have line path - bit bended and i want a text-baseline to follow that path, can this be done in photoshop ?
also, what if i have two such line paths -bit different - can i somehow -fit- the text among-between those two.
CorelDRAW X6 :: Align Text To Baseline Grid - Doubles Line Spacing
Mar 23, 2012adding a page baseline grid! I love it, but I have one problem with it. For example I set the baseline grid to 13 pt, i have text with line spacing specified to 13 pt. I right-click the paragraph text box and select "Align to baseline grid". Then the text surely is aligned to the grid, BUT the lines are spaced to every other line, instead of every line.
View 9 Replies View RelatedCorelDRAW Graphics Suite X6 :: Aligning Text Only - Vertical Align Checkboxes Greyed Out?
Mar 28, 2012Windows XP 32bit, English.
This does not occur when aligning objects, nor text with an object.This only occurs (as far as I can tell) when aligning two or more sets of text alone.
When I enter the align and distribute window the vertical align checkboxes are greyed out with "Top" selected.
It is not possible to uncheck or select any other vertical align option. It is possible to "force" the window to deselect it by selecting "top" in the distribute tab, but this does not make the align options selectable again.
You can workaround this by creating a temporary object to align with your text.
CorelDRAW Graphics Suite X6 :: Align And Distribute Doesn't Work For Text / Fonts
Aug 7, 2012Align & Distribute doesn't work for Text / Fonts
View 1 Replies View RelatedCorelDRAW Graphics Suite X6 :: Fitting Text To Path / Where Text Had Already Been Converted To Curves
Nov 20, 2013A client sent me their logo where the name is straight across. They would now like to wrap it around the circle in their logo... They do not know the name of the font, what the font couldn't id it, not much response on their forum...
Is there a way to fit text to path, where the text has already been converted to curves?
CorelDRAW X5 :: How To Remove Arc From Text After Using Fit Text To Path
Jul 30, 2013May I know how to remove the arc as shown in the picture below without touching the text?
View 9 Replies View RelatedCorelDRAW X4 :: Fit Text To Path
Nov 19, 2012I have attached the file I am looking at. I have fitted text to path, but am using corel draw to create 'steps' for a GIF.
So, I am moving the text around the edge of the arch. When the text reaches the end of the arch, I would like it to connect back to the beginning and continue that way, but I don't really want to have to seperate the text and do it manually.
Is there a way to tell the 'curve' that the final and first node are connected without them being physically connected?
CorelDRAW X5 :: Fitting Text To Path?
Oct 14, 2013For more years I can remember, I have been using CorelDraw4 - I use it for designs for t-shirts and various other printing requirements. A lot of this work involves fitting text to path, particularly round the bottom of a circle. I know how to do it in CorelDraw4, how to do it in Corel draw X5 - I can get wording on the top of the circle, but cannot get separate at the bottom of the circle.
View 5 Replies View RelatedCorelDRAW X6 :: Unfit Text From Path?
Oct 24, 2012Is there any way to unfit text from path? Other than deleting the whole thing and resetting the path and the text? Too far into the process to use undo.
View 4 Replies View RelatedCorelDRAW Graphics Suite 12 :: Align Shape And Text Object At Center Of Shape?
Jan 14, 2012I'm creating a logo that consists of the word DIFFERENT in text and a shape, a dot (an ellipse) that I want to appear above the I and be vertically aligned with I.
How can I do this?The problem is that I can't see how to identify the point in the text - the centre of the I - to act as the target. I can't seem to get any of the Snap to Object tools to work.
I feel that I should be able to mark a specific point anywhere on a shape or an object and use those points to align.
I suspect that I could achieve the effect that I want by splitting the text characters up into individual objects, than I can align them more obviously but then I set up some other issues with kerning.
CorelDRAW Graphics Suite X5 :: Text Above And Below Path
Jul 22, 2011how to get text above and below a path. The path is a circle, and I want to achieve 2 words above the circle and 2 words below. I can get the words below, and to read the correct way round etc, or I can get the words above, but I cant achieve both at the same time
View 5 Replies View RelatedCorelDRAW Graphics Suite X4 :: How To Put Text On A Path
Jun 21, 2011URl....I have never used a text box. Somehow when I copied my list of names from another page, I ended up with rows of them. I really really don't want to retype 132 names. I plan to put them on circles. When I try to do fit to path it says its invalid. I deal with text everyday and always know what I am doing. I know how to put text on a path. I just don't know how to do anything with these text boxes. If i break them apart, it first breaks them into individual names, and next into individual letters.
View 1 Replies View RelatedAutoCAD .NET :: Swept Solid - Align To Path
Nov 11, 2013I'm trying to create a swept solid that is aligned to its path but the solid appears in a different position to the path.
View 1 Replies View RelatedAutoCAD Inventor :: Re-centre Dimension Text In IDWs?
Apr 10, 2013I'm aware this has been raised before, see [URL] however this was way back in 2004. Surely there must be a solution by now!
View 1 Replies View RelatedCorelDRAW Graphics Suite X6 :: Upside Down Text Attached To A Path
Nov 7, 2013I am attaching text to a path, but on the bottom of the ellipse, the text is upside down in relation to the text at the top of the ellipse. I am going nuts to try and resolve this. I have CD6 The Official Guide at my side, and no luck.
View 6 Replies View RelatedIllustrator :: Align Text Horizontally And Vertically In Text Box - Text Slightly High Of Center
Jul 9, 2013When you centrally allign text horizontally and vertically in a text box, the text sits slightly high of the centre. Is there any way of setting an action or setting to deal with this rather than adjusting by eye every time?
View 4 Replies View RelatedIllustrator :: How To Align Intersected Rectangles To A Semi Circle Path
Mar 27, 2013how to create in Illustrator something like that pictureabove?
View 7 Replies View RelatedIllustrator :: Why Align Stroke Inside And Outside Path Not Working Correctly
Feb 11, 2013I'm trying to add a stroke that's aligned to the outside of my path. It appears to be offsetting the stroke *and* moving anchor points at the same time. It does the same kind of thing when I align the stroke to the inside. It is fine when i align the stroke to center. The one that is offset to the top-left is the align-inside one.
View 7 Replies View RelatedCorelDRAW Graphics Suite X5 :: Stretching Text Width In Envelope Or On Path
Jun 21, 2011Is there a way to stretch the width of text, once it is in an envelope or on a path? You can adjust the kerning(spacing), but I don't see anywhere that you can adjust the width of the letters.
An example: I have the word MAVERICKS on an arched path in a design. I want to change that design for the RAMS, so where it says MAVERICKS it will now say RAMS. The problem is RAMS is a much shorter word and I need it to stretch to the same width as the previously used MAVERICKS.
Illustrator :: Block Text To Path -> Text Flow Along Resulting Path
Nov 5, 2013I'm trying to create an effect of small text following the outline of very large bold block text (see picture). The idea I had was to first create the 'ME' in very large font as text. Then convert that text to an object / path using "Object -> Flatten Transparency... -> "Convert all text to outline"". Then, select that path and use the "Type along path" tool.
However, when I use that process, the resulting path is a compound path that therefore the Type Along Path tool doesn't work. Any pointers on how to achieve this? The image below I just used the pencil to trace the letters (quick and dirty) but the result is choppy, etc.
GIMP :: Text Along Path Not Placing Text At Beginning Of Path
May 17, 2012I'm trying to place text to a "curvy" path. I took some screen shots to show you want I'm talking about.
I created a simple curvy path 1 point on each end. (I noticed I drew in a node in the middle of the curve as well. But that actually doesn't exist in the path. I created the text a reasonable size and clicked "Text Along Path". As you can see, it never starts at the beginning of the path. Ever. I have sized the font up, and it gets a little closer to the beginning, but obviously the end of the address flies off the path. I've sized down the text and it will start even further to the middle of the path.
GIMP :: Text Along Path And Aligning Center Of Text With Path?
May 23, 2013I have no problem getting my text along a path but I am having trouble getting the text and the path to align so that the center of the text element is centered on the path.
Is this possible or do I have to figure out someway to make my path of a certain length so it ends up that the text fits to it perfectly??
Here is a screenshot of my current problem. You can see that the text and the image below it are centered. I then placed some guide lines to make sure my path was also centered. When I placed that text along the path though, it left justified the text when I want it to be centered instead..
GIMP :: Align Text Not Vertically At Bottom Of Text Box?
Oct 27, 2011is there any possibility in GIMP to align a text not vertically at the bottom of a text box (there are options for left, right, center and fill but that's only the horizontal alignment). The motivation is, that I change a text in an image quite often and it whould "align itself" if it whould always be aligned at the bottom of the textbox.
View 3 Replies View RelatedIllustrator :: CS6 - Center And Vertical Align Text In Text Box?
Feb 20, 2013The Inset Spacing settings within the Area Type Options drop-down are just too cumbersome. Is there an easier way to center text within a text box like we can do in InDesign? Why they left this out of Illustrator CS6.
View 2 Replies View RelatedIllustrator :: Convert Text Path Back Into Line Path In CS 5?
Jan 9, 2013I've tried every permutation of copy and paste; I renamed the path to path. It looks like a path when I add stroke, but it does not behave like one. I can't cut it or join it to any other path. It remembers it's text path status. I'm running OS X 10.7.5.
View 11 Replies View RelatedIllustrator :: Convert Text Path Back To Regular Path?
Mar 20, 2014I accidentally converted a path to a text path. I searched the forum for how to convert it back to a regular path. The answer I found said to select the path and hit Command+C+F. This gives me another text path! I now have at least 6 copies of the path in my files but they are ALL text paths and none are visible with a stroke.
View 5 Replies View RelatedPhotoshop :: How To Vertically Align Text Within A Text Box
Oct 22, 2012I am creating a banner for a website. The banner is say 400 pixels wide by 60 pixels high. I drag the horizontal type tool so that it covers the entire rectangular shape exactly. I can center the text horizontally by selecting Window-->Paragraph and then selecting the center button. However I can't seem to center the text vertically in the banner using some Photoshop option. Once the text is typed then I can move it to what I think is vertically centered but it may not be exact.
The reason I am looking for exactness is I have to create several banners that are the same dimension but the text within will be different. Some of the banners will be one line and others will be two lines. I would prefer to vertically center them exactly.
GIMP :: Text Along Path Function Hovers Too Far Above Path?
Mar 7, 2013Why the "Text along path" feature hovers the text so far above the currently active path? (in my case, the space between the path and the text is about 3 times the height of the currently used font!). I've been told that the letters should lie on top of or at least closer to the path instead. How can I move the text closer to the path?
View 2 Replies View Related