GIMP :: Text Along Path Function Hovers Too Far Above Path?

Mar 7, 2013

Why the "Text along path" feature hovers the text so far above the currently active path? (in my case, the space between the path and the text is about 3 times the height of the currently used font!). I've been told that the letters should lie on top of or at least closer to the path instead. How can I move the text closer to the path?

View 2 Replies


ADVERTISEMENT

GIMP :: Text Along Path Not Placing Text At Beginning Of Path

May 17, 2012

I'm trying to place text to a "curvy" path. I took some screen shots to show you want I'm talking about.

I created a simple curvy path 1 point on each end. (I noticed I drew in a node in the middle of the curve as well. But that actually doesn't exist in the path. I created the text a reasonable size and clicked "Text Along Path". As you can see, it never starts at the beginning of the path. Ever. I have sized the font up, and it gets a little closer to the beginning, but obviously the end of the address flies off the path. I've sized down the text and it will start even further to the middle of the path.

View 7 Replies View Related

GIMP :: Text Along Path And Aligning Center Of Text With Path?

May 23, 2013

I have no problem getting my text along a path but I am having trouble getting the text and the path to align so that the center of the text element is centered on the path.

Is this possible or do I have to figure out someway to make my path of a certain length so it ends up that the text fits to it perfectly??

Here is a screenshot of my current problem. You can see that the text and the image below it are centered. I then placed some guide lines to make sure my path was also centered. When I placed that text along the path though, it left justified the text when I want it to be centered instead..

View 2 Replies View Related

Illustrator :: Block Text To Path -> Text Flow Along Resulting Path

Nov 5, 2013

I'm trying to create an effect of small text following the outline of very large bold block text (see picture).  The idea I had was to first create the 'ME' in very large font as text.  Then convert that text to an object / path using "Object -> Flatten Transparency... -> "Convert all text to outline"".  Then, select that path and use the "Type along path" tool. 

However, when I use that process, the resulting path is a compound path that therefore the Type Along Path tool doesn't work.  Any pointers on how to achieve this?  The image below I just used the pencil to trace the letters (quick and dirty) but the result is choppy, etc.

View 4 Replies View Related

Illustrator :: Convert Text Path Back Into Line Path In CS 5?

Jan 9, 2013

I've tried every permutation of copy and paste; I renamed the path to path. It looks like a path when I add stroke, but it does not behave like one.  I can't cut it or join it to any other path. It remembers it's text path status. I'm running OS X 10.7.5.

View 11 Replies View Related

Illustrator :: Convert Text Path Back To Regular Path?

Mar 20, 2014

I accidentally converted a path to a text path. I searched the forum for how to convert it back to a regular path. The answer I found said to select the path and hit Command+C+F. This gives me another text path! I now have at least 6 copies of the path in my files but they are ALL text paths and none are visible with a stroke.

View 5 Replies View Related

Illustrator :: Make Text On Path Ends Exactly At End Of Path?

Jul 11, 2013

Is there any function or script that auto-adjust tracking so text on a path meets the exact end of the path/bracket?

View 4 Replies View Related

GIMP :: No New Path Created In Path Dialog

Sep 25, 2011

When i creates a new path with Shift+Click by path tool no new path created in path dialog.Why?

View 3 Replies View Related

GIMP :: Text Along Path

Nov 6, 2012

I am a bit skilled in basic gimp use but I am looking to do text along a path in gimp 2.8. I under stand about creating a path making it visible etc but i cant use the add selection tool nor does my text options include the button to text along path i read a post on a video some one mentioned a plugin i tried to find the plugin and could not getting extremely upset . Is there a plugin i need if so where can i dl it and how do i install it .

View 2 Replies View Related

GIMP :: Text Along Path

Jul 14, 2011

I've been struggling to get some text to go along a circular path. I've finally done it, but it's going along the wrong part of the circle - I want it to go along the top and it's part way round - and I can't seem to find a way to move it along. I've tried several times but it does the same thing each time.

Also the text isn't showing in the right font, although it is in the text box. Am I missing something?

View 2 Replies View Related

GIMP :: 2.8 Text Along Path?

May 13, 2012

I just downloaded GIMP 2.8 for Max Snow Leopard. I like a lot of the new features, particularly being able to use the one window feature.

I'm having some challenges with Text along path. I found it under the context menu okay. However, when I use it, only part of the words I'm trying to put on the selected path show up. I was using three words that amount to a total of 20 letters. The last half of the last word is getting cut off. I've tried several different things to no avail.

View 14 Replies View Related

GIMP :: 2.8 - How To Use Text Along A Path

May 25, 2013

Is there documentation on using the 'text along a path' command for gimp 2.8?

The documentation that exists ... [URL] ....shows the path tool in the tool box but I dont have this button. Is this documentaion out of date?

I found somewhere saying that 'text along a path' has been moved to the text context menu but I cant figure out what this context menu is supposed to be.

View 2 Replies View Related

GIMP :: Text Along Path Tool

Mar 8, 2011

Text Along Path tool. I create a path then select the text tool and type some text. I click on the Text along Path button and an outline of my text shows up along my path. That's as far as I can go. How do I make the text stick there? How do I complete this process. I know the solution is simple but I can't figure it out and I don't see it in the GIMP manual.

View 1 Replies View Related

GIMP :: How To Put Text On A Curved Path

May 15, 2012

I'm an occasional Gimp user and am having a problem tryingto create some CD/DVD labels. I want to put text on a curved path but haven't beenable to get a persistent path.

I've followed instructions in the help manual and from the "Beginning GIMP" bookabout creating a path but the path won't display after switching to a differenttool.

These screenshot links show:1) Using brush selected for path

[URL].... Using line selected for path
[URL]...Resulting path (same for both types)
[URL]....

As soon as I select the text tool, the path disappears. Obviously I'm missing somestep that would make the path persistent or I'm misunderstanding how paths work.Shouldn't the path remain visible?

The Gimp version is 2.6.12 on a KDE desktop under openSuSE 12.1 & 12.2.

View 3 Replies View Related

GIMP :: Editing Text Along A Path?

Nov 18, 2012

I have been using it to create graphics for the pin-back buttons I make. I have been using the Photoshop 1" button template located on this page:[URL]

The template has the words "perimeter text" that follows the inside of a path on the template. In the video demo on the same page in which the user used photoshop to demonstrate, she just hovers over the text with the mouse after selecting the text tool and is able to click on it and just change the exsisting text. I have not found this to be the case using Gimp. Is there a way I can easily edit this text, or do I have to create my own text along the path? If I have to create my own text along the path, how do I make it so the text follws in inside edge of the path?

View 1 Replies View Related

GIMP :: Place Text Along A Path?

Jan 9, 2014

I am trying to place my text along a path. I have followed the guides but gimp only places half the text along the path. I don't know what I am doing wrong. I have selected the path, text is on dynamic. It's a curve path but the text only goes up one side and it it not the full text. I have change size of text font everything I can think off.

111.tiff (Size: 281.24 KB / Downloads: 14)

View 4 Replies View Related

GIMP :: Colour Of Text On A Path?

Mar 21, 2012

I finally managed to create some text along a curved path. That took a while. Now how do I A) fill it with some colour (it looks like it's just outlined text right now), and B) make it actually part of the image (exporting the image to jpeg, it doesn't seem to show up )

View 3 Replies View Related

GIMP :: How To Remove Text From Path

Apr 1, 2013

I created some text, and then immediately clicked text along path. it created some weird little pink pixely shape. if i keep clicking it it makes more. And i can't get rid of it.

It's above every layer, and it's not actually on a layer. If i hide, or even remove, every single layer it is still there. How can i delete these weird shapes that i erroneously made with the text along path tool?

[URL] it's that weird spot about mid screen, and the text in the bottom left. i just can't figure out how to remove that stuff

View 3 Replies View Related

GIMP :: How To Make Text Along Path

Oct 1, 2013

I've been using gimp occasionally here and there but never anything complicated. Now I want to make a text string appear along a path. I thought it would be easy, but after googling some how-to's I found a source of infinite frustration.

The thing is that the paths of string letters are almost never the way I want them to be. Although I tried a rather time consuming workaround for my task, it really bugs me that I was not able to use a built in feature.

Troubleshooting info: tried both gimp 2.8.2 and latest i could get 2.8.6 for windows, running win 7 x64

steps:
1. select path tool and create some path
2. select text tool and add some text
3. select the path created earlier from the Paths tab
4. Layer -> Text along path

and this is what I get (made the original path (red) and string's path (blue) visible):

View 3 Replies View Related

GIMP :: Text Missing Along Path?

Nov 20, 2012

I am trying to create a little logo, I write some text. When I put the text along a path, however long, the end of the text is missing. From my initial enquiry, the bigger the space I add in between letters, the more letters are missing at the end. However at times even without spacing the text is not complete. I have checked my layers, they are all to the image size, and I took a huge canevas to make sure!

space my letters in my text and yet have them all appeared along my path or at least get the full text on my path...

View 1 Replies View Related

GIMP :: Text To Path - Unable To Bring Assigned Text Color

Nov 6, 2011

I am trying to do text to path and I finally got it to work, but it is not bringing the text color that I assigned. Instead the text becomes a black outline of the real text. I uploaded this to the application I wanted to use it in, and the text was gone.

View 1 Replies View Related

GIMP :: Text Spacing When Running On Path

Oct 22, 2011

How would I get text letters to run along a path evenly spaced when the path begins at a fixed point in the middle of the screen?

I've read about:
1) Starting later letters on later frames
2) Incorporating subsequent delay times in the layer names
3) Manipulating the From and To points in the path setup.

I just could not seem to modify the instruction from the "FOLLOW" tut to my situation. See attachments. The jumbled up letters on the first attachment are circled in red.

t1dAttached File(s) Text Space 1.JPG (63.71K)
Number of downloads: 19 Test Space 3.JPG (68.21K)
Number of downloads: 20

View 14 Replies View Related

GIMP :: Text Along Path But With Straight Letters

Aug 3, 2013

So how can I accomplish something like the 'Reckless' text in the picture of the hat below using Gimp?

I already know how to 'text along path' but then the letters are skewed.

View 9 Replies View Related

GIMP :: How To Save With The Text Along Path In View

Mar 17, 2013

Whenever I save my image I lose my text along path. It doesn't matter whether I save as xcf or export, the text path disappears. How do I save with the text along path in view? I'm using 2.8.

View 1 Replies View Related

GIMP :: Missing Text Along Path Button

Aug 21, 2013

Today I found out that my Gimp 2.8 haven´t a "text along path" button in the text tool dialog. I must make it via the context menu of the text layer. Why is missing that button there?

View 3 Replies View Related

GIMP :: Moving Text After Adding Along A Path

Nov 16, 2012

I'm creating text along a path and then stroking the outline and adding a gradient fill - this is all fine. The problem comes when I want to move it, as once the text is added along the path, it often doesn't follow the path until the end so I'd like to centre it on the page, or maybe move it vertically a bit to fit around other stuff as I add to the image.

View 3 Replies View Related

GIMP :: Text Along Path Not Working Properly

Jun 20, 2012

Yesterday I installed the newest GIMP 2.8 version for map making. I want to make a great map of USA/Mexico.Everything works fine except the most important thing for me, which is wrapping the text along the path.

The text is usually distorted and away from the path.This is how I do it:

Tools -> Paths -> make the path on map by right clicking
left click on just made path -> Tools -> Text
right click on text -> click on Text Along Path

View 4 Replies View Related

GIMP :: How To Curve Text Via Creating Path

May 30, 2013

I have been working on a project in which I need to curve text. I know how to curve the text via creating a path, path to text, etc. This issue that I am having is that the bottom of the text is distorted. By distorted, I mean the bottom of the text becomes thin and it looks bad.

Here is an example of the issue that I am dealing with (if it shows up).

View 2 Replies View Related

GIMP :: Text Along Path Option Is Missing

Feb 7, 2013

I have recently installed Gimp 2.8.2, then reinstalled 2.8.4 because the Text Along Path option was missing from the Text Editor options. I was using this tool just fine in an older version so I knew the in's and out's of it then.

As you can see from the attachment, I believe I have all the necessary items in place. In other words, I have a path, which shows in the path dialog. I have text that was created after the path. In the picture, the Text Editor is currently selected while the path is showing in the dialog but the Text Along Path option is missing.

View 1 Replies View Related

GIMP :: Couldn't Find Text Along Path Button

Jun 14, 2013

after I created a path , added text, I couldn't find the "text along path" button (which is supposed to be at the bottom (text)tool option), so how can I make it appear?

View 2 Replies View Related

GIMP :: Text To Path While Keeping Letters Vertical

Feb 4, 2014

In the example, the red text is along the path (dotted red line). Normally the letters would slant too, but is there a way to keep them vertically oriented while doing text-to-path?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved