Text Along Path tool. I create a path then select the text tool and type some text. I click on the Text along Path button and an outline of my text shows up along my path. That's as far as I can go. How do I make the text stick there? How do I complete this process. I know the solution is simple but I can't figure it out and I don't see it in the GIMP manual.
View 1 RepliesI use the path tool to create the shape of the text line I want to curve. I enter the text I want with the font, colour, etc, and select text along path. The text goes where I want it, but no matter what I have tried, the text colour along the path (my curved text) is always red and it doesnot look like the font in my text area. I can change the font / colour of the original text which works great, but the text along the path doesn't seem to change.
View 5 Replies View RelatedI created text on a curved path using the pen tool and the the type on a path tool. However, there are portions of the text that I want to taper. For example, my text begins horizontally, continues to the right, and gradually curves downward. As the text curves downward I would like it to taper smoothly into a narrower and narrower text.
View 1 Replies View RelatedI'm trying to place text to a "curvy" path. I took some screen shots to show you want I'm talking about.
I created a simple curvy path 1 point on each end. (I noticed I drew in a node in the middle of the curve as well. But that actually doesn't exist in the path. I created the text a reasonable size and clicked "Text Along Path". As you can see, it never starts at the beginning of the path. Ever. I have sized the font up, and it gets a little closer to the beginning, but obviously the end of the address flies off the path. I've sized down the text and it will start even further to the middle of the path.
I have no problem getting my text along a path but I am having trouble getting the text and the path to align so that the center of the text element is centered on the path.
Is this possible or do I have to figure out someway to make my path of a certain length so it ends up that the text fits to it perfectly??
Here is a screenshot of my current problem. You can see that the text and the image below it are centered. I then placed some guide lines to make sure my path was also centered. When I placed that text along the path though, it left justified the text when I want it to be centered instead..
Why the "Text along path" feature hovers the text so far above the currently active path? (in my case, the space between the path and the text is about 3 times the height of the currently used font!). I've been told that the letters should lie on top of or at least closer to the path instead. How can I move the text closer to the path?
View 2 Replies View RelatedI had actually just used it to render something, and went to create a new path to continue my picture. However, the path tool decided it doesn't like to curve anymore so when I click on the line it simply moves the object. I didn't change any settings between finishing my first path and starting the second. It is still in design mode.
I've also wanted to ask if it is possible to link two anchors together when one of the anchors in question is in a complete path. Like, say I have three lines and anchors forming a triangle, shouldn't I be able to link a new anchor to one of the existing ones? Because I sure as heck can't.
I am trying to do text to path and I finally got it to work, but it is not bringing the text color that I assigned. Instead the text becomes a black outline of the real text. I uploaded this to the application I wanted to use it in, and the text was gone.
View 1 Replies View RelatedSimply press 'b' for the bezier select tool, and click where you want a line to begin, and click again where you want the line to end. Now, you can move the line around until you get it perfect by clicking on the dot on either end and dragging it with the mouse. Isn't that neat! You can even click on the middle of the line and bend it! Try it! You can draw any shape with it.
If you make a mess, just press ctrl + z and undo your last changes. The GIMP remembers a very long list of changes, so you can go backwards step by step.
When you are happy with your line, or lines. just click 'Edit' --> 'Stroke path'. A box will open to allow you top choose settings for exactly how you want your line stroked. You can just leave it the way it is, or you can make GIMP do almost anything with your line. GIMP will remember your previous settings too, and offer you the same settings for the next line. When the box mentioned above pops up, I choose my desired settings and hit the "Stroke" button, absolutely nothing happens. No matter how thick I tell it to make the line, no line ever appears.
The pencil tool normally doesn't do antialiasing. However, when I stroke along a path with the pencil tool, the result is antialiased anyway. How can I fix this?
View 1 Replies View RelatedI want to draw a filled shape and edit it later during further design.
I used Path Tool to draw my shape with points. Then I used Selection from Path to create a closed shape, as I can fill it with solid color or patterns.
But how can I edit the shape after it has been filled with color? After using Selection from Path, the shape is independent of the controlling points of Bezier Curve.
In general, how can I draw a closed shape, which is filled with solid color or patterns, but still editable by moving controlling points of Bezier Curve on the border? In other words, when I move the points, the inner color/pattern should be extended.
For instance, when I go to paintbrush tool.
View 3 Replies View RelatedI've been having this problem changing the Paint Tool in the Stroke Path Dialog .
I'm using GIMP v2.6.11
First I stroke a path using the Paintbrush as the paint tool. Then I change the Paintbrush to Airbrush and try to stroke the same path and it seems like it's still using the Paintbrush (or even worse, it does nothing at all). Sometimes I reopen the stroke path dialog and it seems to have reverted back to the last paint tool I used (Paintbrush) and my Airbrush selection seems to have been completely ignored.
Currently if I want to stroke with different paint tools I have to do the following. Stroke with Paintbrush, stoke with Pencil and then undo (for some reason changing from the pencil tool doesn't have the problem), then stroke with Airbrush. I always have to do this intermediary step of stroking and undoing with a pencil to get the new paint tool to register.
How to close the selected area using the Path Tool? I expected, after clicking in the initial node the area would appear as selected, but no..
2.4.8
The nodes on my path tool seem awfully big. They get in the way of seeing what i'm editing. I've noticed on some tutorials the nodes are quite small. Is there a way to change their size?
View 1 Replies View RelatedIs there any way to export coordinates of a point created using the paths tool? I'm trying to determine the distance of each of the points in the attached picture from the blue mid line.
View 2 Replies View RelatedI created a path with the type tool, selected the path in the Paths panel, I started typing on the path and the type followed the path, though I chose edit > free transform path and scaled it, though the text did not move with the new path and now it is no longer on the path?
1. Why did the text not stay on the path as I transformed it?
2. How do you hide the path so you do not have to see it? I want it there only as a guide for my text to flow across.
way to make parallel shapes using the Path Tool similar to Photoshop?
I haven't used Photoshop in a while, but I remember that you could hold CTRL (on PC) and click with the Pen Tool and it would straighten up your shape for you once the paths are connected and would like to do similar in GIMP but can't find out how.
want some text along a circular path and the result of "text to path" is ALWAYS text is truncated at the 19th character.GIMP 2.8.2 on Ubuntu 12.11
Process1. create a new background
2. make a circular selection
3. issue "select / to path" command
4. issue "select / none" command
5. create my text, 35 characters long on one line6. issue "text / along path" command
The text ALWAYS starts at the 12 o'clock position and is ALWAYS cut off at the 19th character! On the original circle the text cuts off at the 4 o'clock position.If I make the circle larger the text is still cut off at the 19th character but: - It starts at 12 o'clock and is cut off at 2 o'clock
If I make the circle smaller the text is still cut off at the 19th character but: - It starts at 12 o'clock and is cut off at 6 o'clock..All the circles are large enough for all the text to print around their circumference.
I am a bit skilled in basic gimp use but I am looking to do text along a path in gimp 2.8. I under stand about creating a path making it visible etc but i cant use the add selection tool nor does my text options include the button to text along path i read a post on a video some one mentioned a plugin i tried to find the plugin and could not getting extremely upset . Is there a plugin i need if so where can i dl it and how do i install it .
View 2 Replies View RelatedI've been struggling to get some text to go along a circular path. I've finally done it, but it's going along the wrong part of the circle - I want it to go along the top and it's part way round - and I can't seem to find a way to move it along. I've tried several times but it does the same thing each time.
Also the text isn't showing in the right font, although it is in the text box. Am I missing something?
I just downloaded GIMP 2.8 for Max Snow Leopard. I like a lot of the new features, particularly being able to use the one window feature.
I'm having some challenges with Text along path. I found it under the context menu okay. However, when I use it, only part of the words I'm trying to put on the selected path show up. I was using three words that amount to a total of 20 letters. The last half of the last word is getting cut off. I've tried several different things to no avail.
Is there documentation on using the 'text along a path' command for gimp 2.8?
The documentation that exists ... [URL] ....shows the path tool in the tool box but I dont have this button. Is this documentaion out of date?
I found somewhere saying that 'text along a path' has been moved to the text context menu but I cant figure out what this context menu is supposed to be.
How to make something like this logo: [URL]... (also attached below in case link d/n work)
I tried using the line selection tool to create a stroke path in the shape of the design I wanted, but I can't get it to emulate this brush (it always just fades to opaque instead of tapering to a point).
I'm an occasional Gimp user and am having a problem tryingto create some CD/DVD labels. I want to put text on a curved path but haven't beenable to get a persistent path.
I've followed instructions in the help manual and from the "Beginning GIMP" bookabout creating a path but the path won't display after switching to a differenttool.
These screenshot links show:1) Using brush selected for path
[URL].... Using line selected for path
[URL]...Resulting path (same for both types)
[URL]....
As soon as I select the text tool, the path disappears. Obviously I'm missing somestep that would make the path persistent or I'm misunderstanding how paths work.Shouldn't the path remain visible?
The Gimp version is 2.6.12 on a KDE desktop under openSuSE 12.1 & 12.2.
I have been using it to create graphics for the pin-back buttons I make. I have been using the Photoshop 1" button template located on this page:[URL]
The template has the words "perimeter text" that follows the inside of a path on the template. In the video demo on the same page in which the user used photoshop to demonstrate, she just hovers over the text with the mouse after selecting the text tool and is able to click on it and just change the exsisting text. I have not found this to be the case using Gimp. Is there a way I can easily edit this text, or do I have to create my own text along the path? If I have to create my own text along the path, how do I make it so the text follws in inside edge of the path?
I am trying to place my text along a path. I have followed the guides but gimp only places half the text along the path. I don't know what I am doing wrong. I have selected the path, text is on dynamic. It's a curve path but the text only goes up one side and it it not the full text. I have change size of text font everything I can think off.
111.tiff (Size: 281.24 KB / Downloads: 14)
I finally managed to create some text along a curved path. That took a while. Now how do I A) fill it with some colour (it looks like it's just outlined text right now), and B) make it actually part of the image (exporting the image to jpeg, it doesn't seem to show up )
View 3 Replies View RelatedI created some text, and then immediately clicked text along path. it created some weird little pink pixely shape. if i keep clicking it it makes more. And i can't get rid of it.
It's above every layer, and it's not actually on a layer. If i hide, or even remove, every single layer it is still there. How can i delete these weird shapes that i erroneously made with the text along path tool?
[URL] it's that weird spot about mid screen, and the text in the bottom left. i just can't figure out how to remove that stuff
I've been using gimp occasionally here and there but never anything complicated. Now I want to make a text string appear along a path. I thought it would be easy, but after googling some how-to's I found a source of infinite frustration.
The thing is that the paths of string letters are almost never the way I want them to be. Although I tried a rather time consuming workaround for my task, it really bugs me that I was not able to use a built in feature.
Troubleshooting info: tried both gimp 2.8.2 and latest i could get 2.8.6 for windows, running win 7 x64
steps:
1. select path tool and create some path
2. select text tool and add some text
3. select the path created earlier from the Paths tab
4. Layer -> Text along path
and this is what I get (made the original path (red) and string's path (blue) visible):
I am trying to create a little logo, I write some text. When I put the text along a path, however long, the end of the text is missing. From my initial enquiry, the bigger the space I add in between letters, the more letters are missing at the end. However at times even without spacing the text is not complete. I have checked my layers, they are all to the image size, and I took a huge canevas to make sure!
space my letters in my text and yet have them all appeared along my path or at least get the full text on my path...