GIMP :: No New Path Created In Path Dialog
Sep 25, 2011When i creates a new path with Shift+Click by path tool no new path created in path dialog.Why?
View 3 RepliesWhen i creates a new path with Shift+Click by path tool no new path created in path dialog.Why?
View 3 RepliesIs there any way to export coordinates of a point created using the paths tool? I'm trying to determine the distance of each of the points in the attached picture from the blue mid line.
View 2 Replies View RelatedUsing a Mac I have created a path round an object and wish to reduce the opacity of the background but do not know how to do it?
View 5 Replies View RelatedI created text on a curved path using the pen tool and the the type on a path tool. However, there are portions of the text that I want to taper. For example, my text begins horizontally, continues to the right, and gradually curves downward. As the text curves downward I would like it to taper smoothly into a narrower and narrower text.
View 1 Replies View RelatedWhy the "Text along path" feature hovers the text so far above the currently active path? (in my case, the space between the path and the text is about 3 times the height of the currently used font!). I've been told that the letters should lie on top of or at least closer to the path instead. How can I move the text closer to the path?
View 2 Replies View RelatedI'm trying to place text to a "curvy" path. I took some screen shots to show you want I'm talking about.
I created a simple curvy path 1 point on each end. (I noticed I drew in a node in the middle of the curve as well. But that actually doesn't exist in the path. I created the text a reasonable size and clicked "Text Along Path". As you can see, it never starts at the beginning of the path. Ever. I have sized the font up, and it gets a little closer to the beginning, but obviously the end of the address flies off the path. I've sized down the text and it will start even further to the middle of the path.
I have no problem getting my text along a path but I am having trouble getting the text and the path to align so that the center of the text element is centered on the path.
Is this possible or do I have to figure out someway to make my path of a certain length so it ends up that the text fits to it perfectly??
Here is a screenshot of my current problem. You can see that the text and the image below it are centered. I then placed some guide lines to make sure my path was also centered. When I placed that text along the path though, it left justified the text when I want it to be centered instead..
I have created a path and typed text into it. Along the path is a little circle with an x in it. This little x appears to be hiding my text and i can not move it. How do I get my text to show up?
View 8 Replies View RelatedI am using old Photoshop 7 because honestly, it has always filled every minor need of mine. Normally, I'm not doing much more than creating simple display placards, but this new project has me stumped. I am creating a simple layout for a device that will be silkscreened. The screen will be exposed using what I am creating in PS7, printed on a transparency.
The problem I am running into is with the text dithering. I found a tutorial that explained selecting the layer, then using Layer>Type>Create Work Path to generate a path around all of the text on the layer. I am now attempting to fill this path with solid black. When I select the path in the palette, the dot to fill the path is grayed out. I found an app note that stated when text is active, this is not an option. I tried disabling the text layer, but it didn't work.
I have created a path with the pen tool (the brown part), and now I want to extrude it, but it extrudes the whole containing block (See image below)
Now I have tried everything, from grouping to compound paths etc, but nothing works.
How do I extrude my path?
I'm working on a graphic in which I wish to have some text around a circle. I know, I know, use "Text to Path" ... except that will not work in this case because the text I want to have go around the circle is not from a font, but drawn by me (my other other project; find a program for creating font files that I can afford to make a proper font so "Text to Path" would work).
So, I have a selection (and a path from that selection) that is basically the outline of the text I want to manipulate. I have another selection for the circle the text is supposed to go around. What is the (probably obvious) thing that I'm missing to get the text selection path to be drawn on the circle?
I am trying to get a dialog box that i can select a path from. Im using it to make a script writer in vba. I have tried a few different ways. Ive tried using the "microsoft common dialog box" it says i dont have a license to do it.. or something... the other way is to add a reference through tools, and with like "textbox5.text" something that made no sense...
View 2 Replies View RelatedI've created a motion path animation. In preview everything works well, I then go to create a AVI/WMV file and it builds the video without any problem. When you view the video it always stops in the same place (about 6 seconds in) but the video keeps running for the full duration of 30seconds.
I've tried this several times with different settings but always the same outcome.
Object - Path - Join dialog box asking if smooth or corner path is not showing up in CS5. How to get it bac/activate it?
View 5 Replies View RelatedI want to open a "Save File Dialog " with some default path.Like when user run that script I want to open a "Save As" dialog box with default path "/Volumes/<shared name>/<folder name>/.. ."I am using File.SaveDialog(prompt, filter);
but it doesn't open to the location by default that I want to open.
When creating a work path on a new layer, the path is a grayish black color is there a way to create that path to be a different color, yellow for instance? Using CS6, I don't see it in preferences anywhere
View 7 Replies View RelatedI have many drawings that were created with the xref's as full path and I need them to be relative path. I would just go in and reatch them as relative path but the drawings are complete and there are different layers frozen in each one.
View 4 Replies View RelatedIs there a way to change an xref from saved "full path" to "relative path"?
View 1 Replies View RelatedI have found a way to convert FULL to RELATIVE using XRP2004.lsp but not the other way round. Main reason I want to do this is to change the Relative to Full, move the drawing and then revert them back to Relative.
View 3 Replies View RelatedI have some negative space I created(black area, see first image) that I want to fill with type, not just a simple fill.
Basically I want to create the negative space from a bunch of small minus signs(-) that need to line up as they go across. If I type on each path one at a time as the text doesn't line up that way. This needs to be one continuous path. (see second image)
Unfortunately if I add them together, it creates a compound path, which you cannot type on, unless I am mistaken? So I need them to be a path, not a compound object.
In illustrator, is there a way to reduce anchors points in a segment path without altering the path?
Is there a better and more efficient way to reduce anchors points than using the pen-minus tool?
I'm trying to stroke my work path with a brush I tailored myself. now, when I create a workpath from my text layer and switch to my top layer to try and choose 'stroke path' the option is shaded out.
View 10 Replies View RelatedActually, I have more than 6 years experience on Catia V5 customization and vb and vb.net catia API's. What I am trying to do know is converting some applications or programs running on catia to the inventor.
The first program deal with the inventor API relating to the SweepFeatures class. So my first problem is about to find the right way to use the sketch3D for the creation of the path which is the input of the sweep method.
(oInvPartFeats.SweepFeatures.AddUsingPath(oInvProfile, oInvProfPath3D, kNewBodyOperation).
I know That is possible to create a path by using the CreatePath method when the input is SketchLines or any guide curve in the 2D Plan. Also, I tried to generate path by using the ProfilePath3D method of the sketch3D class but No way, the AddUsingPath method of the SweepFeatures Class doesn't accept it as path Input.
So I cannot imagine that is limitation of inventor because it was possible to do it by using the seep function of the model tab in the ipart document. How to create the path object as an input of the AddUsingPath method of the SweepFeatures class.
I have a bunch of material libraries that need to be re-pathed as I have moved my textures, the Bitmap/Photometric paths editor has a tickbox that says "include material library" which leads me to believe that it will list, for re-pathing, all materials in my library.
However, it doesn't seem to do anything for me even though the library i need to re-path is loaded into my Material/map browser.
I am attaching a File as a xRef. At the time of Attachment, I select attach as attachment, and No Path in Path.
Now if I try to fetch detail of this file using MdiActiveDocument.Database and BlockTableRecord, I gets only file name not the path. However, In AutoCAD we can see the file path under "Found At". Can we read / fetch this using C#.
In case of Full Path or relative Path, I gets full path in btr.PathName
Here is my code and I am using AutoCAD 2013
Database db = acadApp.DocumentManager.MdiActiveDocument.Database;
using (Transaction Trans = db.TransactionManager.StartTransaction()) {
BlockTable BlkTbl = (BlockTable)Trans.GetObject(db.BlockTableId, OpenMode.ForRead,false,true);
db.ResolveXrefs(false, false);
[Code] ...........
I've tried every permutation of copy and paste; I renamed the path to path. It looks like a path when I add stroke, but it does not behave like one. I can't cut it or join it to any other path. It remembers it's text path status. I'm running OS X 10.7.5.
View 11 Replies View RelatedI accidentally converted a path to a text path. I searched the forum for how to convert it back to a regular path. The answer I found said to select the path and hit Command+C+F. This gives me another text path! I now have at least 6 copies of the path in my files but they are ALL text paths and none are visible with a stroke.
View 5 Replies View RelatedI'm trying about 8 hours to convert a Photoshop shape in to a working path in order to put a brush border around it. I don't understand why the "stroke path with brush" is grayed out and not usable directly on the shape path itself.
"Load path from selection" is not an option because it deforms my path.
I want to be able to transpose the perspective of the existing image to my new 3D prism shape.Why can't I create a path.. and then drag nodes on that path.. and warp the pixels at the same time???
It shouldn't apply to just 3d.. because I should be able to draw a rigid path around anything and warp / stretch the image from those points.
I've got two paths. They don't intersect, exactly, a straight path ends at a curved path, but I need the end of the straight path to be curved, to make it look like the two meet perfectly. The two gray paths (a single path, then path->offset for the second) are the outside of a shield shape. The two black lines (paths) just surround text, but currently they overlap the gray paths.
View 2 Replies View RelatedIs there any function or script that auto-adjust tracking so text on a path meets the exact end of the path/bracket?
View 4 Replies View Related