CorelDRAW X6 :: Unfit Text From Path?
Oct 24, 2012Is there any way to unfit text from path? Other than deleting the whole thing and resetting the path and the text? Too far into the process to use undo.
View 4 Replies
ADVERTISEMENT
CorelDRAW Graphics Suite X6 :: Fitting Text To Path / Where Text Had Already Been Converted To Curves
Nov 20, 2013A client sent me their logo where the name is straight across. They would now like to wrap it around the circle in their logo... They do not know the name of the font, what the font couldn't id it, not much response on their forum...
Is there a way to fit text to path, where the text has already been converted to curves?
CorelDRAW X5 :: How To Remove Arc From Text After Using Fit Text To Path
Jul 30, 2013May I know how to remove the arc as shown in the picture below without touching the text?
View 9 Replies View RelatedCorelDRAW X4 :: Fit Text To Path
Nov 19, 2012I have attached the file I am looking at. I have fitted text to path, but am using corel draw to create 'steps' for a GIF.
So, I am moving the text around the edge of the arch. When the text reaches the end of the arch, I would like it to connect back to the beginning and continue that way, but I don't really want to have to seperate the text and do it manually.
Is there a way to tell the 'curve' that the final and first node are connected without them being physically connected?
CorelDRAW X5 :: Fitting Text To Path?
Oct 14, 2013For more years I can remember, I have been using CorelDraw4 - I use it for designs for t-shirts and various other printing requirements. A lot of this work involves fitting text to path, particularly round the bottom of a circle. I know how to do it in CorelDraw4, how to do it in Corel draw X5 - I can get wording on the top of the circle, but cannot get separate at the bottom of the circle.
View 5 Replies View RelatedCorelDRAW X4 :: Text Fit To Path With Centre Align?
May 24, 2008I want to do the centre akignment of text fiit to path. when i m selecting the text , the alignment is already showing the left aklign as default. it dosent work.
View 6 Replies View RelatedCorelDRAW Graphics Suite X5 :: Text Above And Below Path
Jul 22, 2011how to get text above and below a path. The path is a circle, and I want to achieve 2 words above the circle and 2 words below. I can get the words below, and to read the correct way round etc, or I can get the words above, but I cant achieve both at the same time
View 5 Replies View RelatedCorelDRAW Graphics Suite X4 :: How To Put Text On A Path
Jun 21, 2011URl....I have never used a text box. Somehow when I copied my list of names from another page, I ended up with rows of them. I really really don't want to retype 132 names. I plan to put them on circles. When I try to do fit to path it says its invalid. I deal with text everyday and always know what I am doing. I know how to put text on a path. I just don't know how to do anything with these text boxes. If i break them apart, it first breaks them into individual names, and next into individual letters.
View 1 Replies View RelatedCorelDRAW Graphics Suite X6 :: Upside Down Text Attached To A Path
Nov 7, 2013I am attaching text to a path, but on the bottom of the ellipse, the text is upside down in relation to the text at the top of the ellipse. I am going nuts to try and resolve this. I have CD6 The Official Guide at my side, and no luck.
View 6 Replies View RelatedCorelDRAW Graphics Suite X5 :: Stretching Text Width In Envelope Or On Path
Jun 21, 2011Is there a way to stretch the width of text, once it is in an envelope or on a path? You can adjust the kerning(spacing), but I don't see anywhere that you can adjust the width of the letters.
An example: I have the word MAVERICKS on an arched path in a design. I want to change that design for the RAMS, so where it says MAVERICKS it will now say RAMS. The problem is RAMS is a much shorter word and I need it to stretch to the same width as the previously used MAVERICKS.
Illustrator :: Block Text To Path -> Text Flow Along Resulting Path
Nov 5, 2013I'm trying to create an effect of small text following the outline of very large bold block text (see picture). The idea I had was to first create the 'ME' in very large font as text. Then convert that text to an object / path using "Object -> Flatten Transparency... -> "Convert all text to outline"". Then, select that path and use the "Type along path" tool.
However, when I use that process, the resulting path is a compound path that therefore the Type Along Path tool doesn't work. Any pointers on how to achieve this? The image below I just used the pencil to trace the letters (quick and dirty) but the result is choppy, etc.
GIMP :: Text Along Path Not Placing Text At Beginning Of Path
May 17, 2012I'm trying to place text to a "curvy" path. I took some screen shots to show you want I'm talking about.
I created a simple curvy path 1 point on each end. (I noticed I drew in a node in the middle of the curve as well. But that actually doesn't exist in the path. I created the text a reasonable size and clicked "Text Along Path". As you can see, it never starts at the beginning of the path. Ever. I have sized the font up, and it gets a little closer to the beginning, but obviously the end of the address flies off the path. I've sized down the text and it will start even further to the middle of the path.
GIMP :: Text Along Path And Aligning Center Of Text With Path?
May 23, 2013I have no problem getting my text along a path but I am having trouble getting the text and the path to align so that the center of the text element is centered on the path.
Is this possible or do I have to figure out someway to make my path of a certain length so it ends up that the text fits to it perfectly??
Here is a screenshot of my current problem. You can see that the text and the image below it are centered. I then placed some guide lines to make sure my path was also centered. When I placed that text along the path though, it left justified the text when I want it to be centered instead..
Illustrator :: Convert Text Path Back Into Line Path In CS 5?
Jan 9, 2013I've tried every permutation of copy and paste; I renamed the path to path. It looks like a path when I add stroke, but it does not behave like one. I can't cut it or join it to any other path. It remembers it's text path status. I'm running OS X 10.7.5.
View 11 Replies View RelatedIllustrator :: Convert Text Path Back To Regular Path?
Mar 20, 2014I accidentally converted a path to a text path. I searched the forum for how to convert it back to a regular path. The answer I found said to select the path and hit Command+C+F. This gives me another text path! I now have at least 6 copies of the path in my files but they are ALL text paths and none are visible with a stroke.
View 5 Replies View RelatedGIMP :: Text Along Path Function Hovers Too Far Above Path?
Mar 7, 2013Why the "Text along path" feature hovers the text so far above the currently active path? (in my case, the space between the path and the text is about 3 times the height of the currently used font!). I've been told that the letters should lie on top of or at least closer to the path instead. How can I move the text closer to the path?
View 2 Replies View RelatedIllustrator :: Make Text On Path Ends Exactly At End Of Path?
Jul 11, 2013Is there any function or script that auto-adjust tracking so text on a path meets the exact end of the path/bracket?
View 4 Replies View RelatedIllustrator :: Created Text On Curved Path Using Pen Tool And Type On Path Tool
Feb 13, 2014I created text on a curved path using the pen tool and the the type on a path tool. However, there are portions of the text that I want to taper. For example, my text begins horizontally, continues to the right, and gradually curves downward. As the text curves downward I would like it to taper smoothly into a narrower and narrower text.
View 1 Replies View RelatedGIMP :: Text To Path - Unable To Bring Assigned Text Color
Nov 6, 2011I am trying to do text to path and I finally got it to work, but it is not bringing the text color that I assigned. Instead the text becomes a black outline of the real text. I uploaded this to the application I wanted to use it in, and the text was gone.
View 1 Replies View RelatedAutoCAD 2013 :: INCREMENT Text Or Attribute Text Along Path
Feb 25, 2013Recently i came to know about LISP called INCREMENT it is so useful. But i have small problem with that It Increments only in X or Y direction or according to UCS. I am looking for a command which can increment along path. In my drawigns many numbers they are in a order by room wise, i have drawn a path on numbers so number should sort as per path direction..i have tried with ALTEXT LISP but iam not getting it is not corting my numbers along path.]
View 5 Replies View RelatedGIMP :: Text To Path Not Working / Text Cut Off
Jan 29, 2013want some text along a circular path and the result of "text to path" is ALWAYS text is truncated at the 19th character.GIMP 2.8.2 on Ubuntu 12.11
Process1. create a new background
2. make a circular selection
3. issue "select / to path" command
4. issue "select / none" command
5. create my text, 35 characters long on one line6. issue "text / along path" command
The text ALWAYS starts at the 12 o'clock position and is ALWAYS cut off at the 19th character! On the original circle the text cuts off at the 4 o'clock position.If I make the circle larger the text is still cut off at the 19th character but: - It starts at 12 o'clock and is cut off at 2 o'clock
If I make the circle smaller the text is still cut off at the 19th character but: - It starts at 12 o'clock and is cut off at 6 o'clock..All the circles are large enough for all the text to print around their circumference.
GIMP :: When Using Text To Path The Text Is Cut Off
Mar 4, 2013When I try to use Text to path it only transfers 15-16 characters, ignoring the rest of the text. Why does this happen? E.g "I have a problem with gimp" will return "I have a proble".
I have tried several times with different texts and to different paths.
Using Gimp 2.8.2 on Linux.
CorelDRAW / DESIGNER SDK :: How To Wrap Text Inside A Text Field / Paragraph Text Using C#
Feb 1, 2013I have designed a C# application to To Print I Cards Of School. Here I am sending data from my application to a CDR FILE (Already Created ) Which Contains ADDRESS Text Field..Now I Need to Print Address(which contains 60 characters or more) on this Text field .
I Have Used The following c# Code.. To Replace Address text field that contains text 'Address '.....
s.Text.Replace('Address',"Text To be replaced .......")...here s is Active shape...
This Works Fine But How can i WRAP TEXT....of Address field.
CorelDRAW X3 :: Rotate Object To A Path
Feb 16, 2012I would like to know how to rotate an object to a path. I need something like in green color which I am not able to achieve.
View 12 Replies View RelatedCorelDRAW X5 :: Delete Path When Using Blend Tool?
Jul 23, 2011I'm learning to use Coreldraw for artistic metal cutting using a plasma cutter, so the file itself is important and not just what appears on the screen (or what prints out).
I've used the blend tool to draw some circles along a wavy path. I want the circles but I don't want the path. I remove the outline and the path dissappears on the screen but it's still in the file and when I export as a dxf file there is the path cutting right through the circles.
If I use Detach from Path then the circles simple come of my wavy path and end up in a straight line.
Are there any other techniques to give the same result but one where I can keep the circles/objects in their locations while removing the path at file level.
I know of a plugin available for Coreldraw that can take a bunch of dissimilar objects and place them on a path but at this point don't know if it can do what I need and delete the path afterwards.
Or is there any way I can copy the circles without copying the path.
CorelDRAW X5 :: Pattern (Repeat Symbol) Along Path
Aug 1, 2012s there a way to make patterns (repeat symbol) along paths? Something like using Artistic Media > Brush, but I'd like it to repeat symbol. It's possible and simple in illustrator, but in work I have to use Corel Draw.I need to make something like that: [URL] ..... can't use line style, because the pattern is too complex. Those symbols have to be smooth, so Foster's solution isn't that good...
View 10 Replies View RelatedCorelDRAW X6 :: Pattern A Shape On Specific Path
Dec 28, 2013How can i pattern a hole on a specific path?
please look at below picture : [URL] ........
I like to pattern a hole on along of the M shape path.
CorelDRAW Graphics Suite X6 :: How To Close A Path
Mar 31, 2013how do you close a path in x6? i select the two duped lines then go to arrange but no close path option. i did it in x4.
View 2 Replies View RelatedCorelDRAW X6 :: Blending Along A Path For Rhinestone Template
Mar 6, 2013I am trying to create a rhinestone template of my company logo. I have it as a PNG image as well as text because me logo is of the letter "V" in a downloaded font. I have converted the text to an outline. I created two circle shapes with the diameter of 4.3mm, the exact size of my rhinestones.
I use the blend tool on the two circle shapes, select option "New Path", select my logo, and then select option "Blend Along full path" but it doesn't. Its supposed to create an outline of 4.3mm circles all around the letter but it doesn't.
Photoshop :: How To Put Text Along A Path
Mar 15, 2013I have been trying to put text along a path as found in this article
[URL].........
However my tool bar looks like this when my ellipse is selected. The one in the Tutorial show one like this. What am I not doing to enable my option menu to show these tools?