AutoCad :: Lost Construction Icons?
Jan 11, 2014I lost a toolbar containing several very useful construction icons. The buttons created red horizontal, vertical, cross hairs and other useful options with the click of a button.
View 1 Replies
ADVERTISEMENT
Photoshop Elements :: Lost Icons At Top Of Page On 10?
Nov 1, 2012I have experienced this issue on previous versions of elements. I have elements 10 and when I started it yesterday all the familiar icons on the tool bar were missing. I don’t remember doing anything that would turn them off but I cannot find how to restore them. How would I restore the tool bar at the top of my page?
View 6 Replies View RelatedAutoCad :: Can't Extend Construction Line Across Both Viewports To Snap Them To Construction Line
Dec 24, 2011Everything is on one layout/sheet.
Currently there are a total of 3 viewports in an L formation. The fourth viewport, will go in the upper right. But first, I have to get these aligned.
I think the viewports themselves are fine enough. The problems arise because the model is in Model space so, construction line (as far as I can tell) didn't want to snap to a line, (on the model,) in Paper space.(vertical or horizontal) So, I can only see the construction line, in one viewport at a time. Which means, the construction line is not visible in the viewport immediately to the left. So, I can't extend the construction line across both viewports, to to snap them to the construction line.
AutoCad :: Lost Toolbar With Copy To Clipboard And Paste From Clipboard Icons
Nov 8, 2012I somehow lost the toolbar with the "copy to the clipboard" and "paste from the clipboard" icons.. which tool bar i need to turn back on?
View 2 Replies View RelatedPhotoshop :: PSD Files Do Not Have CS6 Icons But Generic Icons From Windows
Apr 23, 2013I've installed my new windows CS6, all my .psd files have the 'generic icons' windows give to files they don't recognize. Everything else has normal icons (i.e. Illustrator files) but the Photoshop files are blank. This is true whether I'm on any type of viewer format, i.e. details, thumbnails.
View 2 Replies View RelatedAutoCad :: True North Construction
Apr 12, 2012I am making use of some of the building models created using CAD. Since the models are added to virtual earth, I would like to get clarified for few of my doubts,
1) say, when the buildings of true representation on ground is made, whether any reference axis with respect to ground is considered to build the model?
2) How the scaling is made for the same model with respect to ground?
AutoCad 2D :: Construction Line Conundrum
Mar 29, 2011I have this problem with construction lines - maybe it's a misunderstanding of how they're supposed to work on my part. (And I know they're kind of old school and I should use some direct input probably for some things, but I like 'em )
If I click out in blank space, they seem to always act fine - that is, they'll rotate to any degree based on a next point or go ortho if that's turned on.
But, if I click first on a snap (any type, mid, end, etc), then move my mouse somewhere else to pick a second point, SOMETIMES the xline slides along along with my cursor, staying aligned to one of the two ortho directions. It does NOT stay fixed at the first point picked and additionally, will not go to any other angle (regardless of where the second point is). Sometimes it works okay when I start from a snap.
Ortho, Polar, etc all have no effect on this behavior.
AutoCAD Inventor :: Dome With Fins Construction
Nov 22, 2011How better to represent this shape - its a dome, which the height is a parameter (elispe), and the fins coming off the top of the dome are supposed to be angled (thicker at the bottom then the top), and the height of the fins needs to increase as they move towards the center.
I created a dome with a repeating pattern of fins but having trouble getting the varying thickness of each fin along with the varying height - the whole part I'm wanting it to be a thin wall shell that can be cast in aluminum and then cleaned up with cnc -
AutoCAD Inventor :: Construction Lines On The Drawing
Dec 13, 2011How to create some construction lines on the Inventor drawing? I have been used construction lines on the AutoCAD drawing; it is very convenient tools to use in the daily basic.
View 7 Replies View RelatedAutoCAD Inventor :: Import 2D DWG As Construction Geometry?
Dec 17, 2011Currently I save all my 2D DWGs as IGES files and then import the files into Inventor. That converts all the geometry to Construction Wires in an IPT, which means MUCH improved performance (you don't have to wait for Inventor to convert every single entity in the DWG to a Sketch entity). I then start a new Sketch and Project those lines that I need from the Construction Wires.
Is there a way to do this directly (convert to Construction Wires) with a DWG, without having to save as an IGES file first?
AutoCAD LT :: Construction Line Does Not Snap To An Intersection?
Oct 9, 2013When trying to place a construction line through an intersection the line offsets depending on where the cursor is placed. When the on screen prompt ask to specify through point. It defaults to 0 and I enter in 45'. It comes back invalid. believe this is a snap setting somewhere but I cant seem to find it.
View 2 Replies View RelatedAutoCAD Architecture :: Reports About Construction Files
Sep 5, 2012I would like to know if there is a way to produce a report, or an Excel or text file in order to list and sort all the construction files by the levels or divisions they are in (i.e. to retrieve information from the corresponding project navigator xml files).
View 1 Replies View RelatedAutoCAD Architecture :: Create Concrete Construction Under The Stairs?
Jun 21, 2011I wonder how do you create a concrete construction under the stairs?
The way ACA creates stairs looks like just a top layer (tiles or wood panels), but I want to put those tiles on a concrete construction.
AutoCAD Civil 3D :: Invert Direction And Construction North
Apr 20, 2012How to get my invert labels to reference construction north rather than actual (surveyed) north?
C3D 2012, SP1
Win7-64 bit
AutoCAD Dynamic Blocks :: How To Create A Construction Label
Jan 21, 2012I would like to create a label that can be copied on a construction drawing that will label various materials. The last time I did this I drew a circle, put text inside, and attached a leader. Every time I wanted to label another instance of a material I had to copy all three things which was too repetitive. I think there is a way to create a dynamic block where all of these things are one block that can be selected and moved with one click but the leader is still adjustable.
View 1 Replies View RelatedAutoCAD Map 3D :: Creating Primary Viewport Construction Plan
Jun 7, 2011I have a massive problem with my autocad map 3d's linetype scale..Problem is caused from creating an primary viewport "construction plan", then creating a second viewport "detail plan" and zooming in on the detail plan viewport.
My line type in the detail plan turns into ------ LV ----- as apart from the normal size of -----LV-----.I've tried everything form psltscale, lt scale, msltscale (i think), audit, recover, basically everything i could.
NOTE: This problem is only on my pc, and none of the other pc's in the office do this. I use classic autocad and have customised my buttons etc.
AutoCAD Inventor :: Stop Selecting Construction Geometry First?
Nov 11, 2013Is there any way to give selection priority to real geometry instead of construction geometry? Every time I go to dimension or constrain IV wants to to pick the construction geometry first. I would like very much to change that.
Inventor Professional 2014
Windows 7, x64
Dual-core i7, 8GB RAM
NVIDIA Quadro FX 880M
HP Elitebook 8540w
AutoCAD 2010 :: Objects Attaching To Construction Points?
May 16, 2013I need to bust a floor plan up into 4 quadrants. Just so I don’t do anything to the original, typically I will copy the plan from one starting coordinate to my “construction document”, or working construction lines. Once I’ve made the copy, I typically use the construction line as a “Quadrant Marker” for match-lines, etc., etc., etc… My problem is that I cannot remove the construction lines from the new copy that I’ve made. Not only that, if I move the copy, or delete the copy, the construction lines now seem to be a part of the “new drawing”. The “Grip” is also listed as a “Constraint”.
“This Does Not Happen With AutoCAD2008, or Earlier Versions” so What is Wrong, or so Different with AutoCAD2011, or Later?
AutoCad 3D :: Construction Lines Showing On Solid Model
Feb 24, 2013How I can get rid of the construction lines that show on a solid model so all l am left with is just solid colour.
View 6 Replies View RelatedAutoCAD Civil 3D :: Label Two Station On One Alignment In Construction Note?
Apr 11, 2013Looking for a way to label two station on one alignment in a construction note.
Civil 3D 2013 (SP1)
Dell T3500
Win 7 Pro X64
Intel Xeon 3.2 GHz
24 GB ram
NVIDIA Quadro 4000
AutoCAD Inventor :: Exporting Sketch / Leaving Construction Lines
Nov 4, 2012I would like to export sketches, but leave off the construction lines as they all show up the same in my CAM program. Is there a way to not export the construction lines? Possibly using the "Post Process" options of the Export Options. I am using 2013.
View 1 Replies View RelatedAutoCAD Inventor :: How To View / Use Hole Centers Or Construction Lines
Dec 1, 2011i've got this snowboard rack that i need to layout/markup with some #8 machine screw holes (with countersink for tapered wood screw head) - two on the end of each stretcher to fasten them to the uprights - 8 in total. I also want to layout 8 more holes on the stretchers themselves. I've got some center holes marked in the sketches..but they're not visible when i activate the hole feature so i can properly place the holes?
why i can't extrude the 4 spacers i've got sketched on the back of the stretchers into a solid . . . . i can only cut?
AutoCAD Inventor :: Hide Part Sketch Construction Lines?
May 16, 2011Is there any way to hide construction lines in Part & Assembly sketches in the same way you can in a Drawing sketch?
I know you can change the line colour to the background colour but this makes the lines invisible in sketch as well.
Not being able to hide the construction is making some layouts pretty pointless since relevant detail is obscured by the construction lines. Grounding the geommetry and deleting the construcion lines isn't an option since the sketches are part of the design development and not fixed.
AutoCAD Inventor :: How To Have Construction Lines Already Drawn When Starting New Sketch
Aug 24, 2012I'm wanting to have vertical and horizontal construction lines already created whenever I start a sketch so that I can set symmetric constraints to the part I'm drawing up. At the moment, I have to draw both lines every time and constrain them to the center point. It would be much easier if it was already there when I started so I can start on the sketch right away. Is there a way to do this? I've included a photo of what I'd like to do.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professional 64-bit
AutoCAD .NET :: Create Construction Geometry That Would Behave As Polyline Bulge
Sep 9, 2013I would like to create a construction geometry that would behave as the Polyline Bulge. In other worlds I would like to create a Construction Arc that would have a Bulge. Upon examination, I was not able to locate any of the Construction Geometry that has a bulge.
The purpose of this is to determine the Bulge location (direction) of the polyline I am creating.
I would like to stay away from creating a database geometry, if possible.
AutoCAD Inventor :: Suppressing Extrusions With Ilogic Based On Construction Line?
Aug 7, 2012I am trying to suppress features or Extrusions if the extrusions are outside of the Raduis of a contruction circle Called the OTL. I have added a model to look at. So lets say I have holes enougth for a 40" dia but I want only hole today for a 20" dia how do i suppress the holes on that radius. Sketch 10 is where the OTL contruction line is and its a radius so its always moving as I go from center out.
View 9 Replies View RelatedAutoCAD 2010 :: Copying Site Level Survey Onto Construction Drawing
Mar 1, 2013I have conducted a level survey on site and once I have loaded it in to aurtocad I need to copy them on to a drawing so can tell where abouts the level are in relation to the site. When I have done this I copy with base point and paste with coordinates but it comes up tiny compared to the drawing.
View 9 Replies View RelatedAutoCAD Inventor :: Importing Solidworks 2011 STEP With Only Construction Group Wires
Jan 10, 2013import this Solidworks 2011.STEP. Can turn this .STEP into a usable inventor part?
I'm using Inventor PRO 2012 64-bit.
AutoCAD Visual LISP / AutoLISP :: Create A Master List Of Construction Notes Then Use Blocks Attributes With Fields
Nov 16, 2012I am looking for a way to create a master list of construction notes then use blocks attributes with fields to link to that master list. That way if the master list changed the note bubbles would change as well.
Sheet sets are being used with this project but I can't think of a way to make it work with the existing sheet set technology.
3ds Max Animation :: How To Rig Construction Crane
Feb 24, 2012How to rig a construction crane? I will be animating the erection of it and then using it to lift forms and other objects into place for various construction projects. I want to be able to have a rig with the capabilities of this video... [URL] ...
View 1 Replies View RelatedPhotoshop :: Construction Paper Effect
Nov 28, 2008how to achieve a construction paper-type effect?
how this sort of a texture was achieved?