I wonder how do you create a concrete construction under the stairs?
The way ACA creates stairs looks like just a top layer (tiles or wood panels), but I want to put those tiles on a concrete construction.
how to create curved semi-circle stairs like the attached image?
View 9 Replies View RelatedHow do you add a break line for stairs? In windows it is under 'express tools' but I can't find it in the mac version.
View 1 Replies View RelatedI would like to know if there is a way to produce a report, or an Excel or text file in order to list and sort all the construction files by the levels or divisions they are in (i.e. to retrieve information from the corresponding project navigator xml files).
View 1 Replies View RelatedI'm trying to create some 3d stairs using autocad 2009 and cannot make it.
Would it be possible to guide me through the steps to accomplish this.
I would like to create a label that can be copied on a construction drawing that will label various materials. The last time I did this I drew a circle, put text inside, and attached a leader. Every time I wanted to label another instance of a material I had to copy all three things which was too repetitive. I think there is a way to create a dynamic block where all of these things are one block that can be selected and moved with one click but the leader is still adjustable.
View 1 Replies View RelatedI would like to create a construction geometry that would behave as the Polyline Bulge. In other worlds I would like to create a Construction Arc that would have a Bulge. Upon examination, I was not able to locate any of the Construction Geometry that has a bulge.
The purpose of this is to determine the Bulge location (direction) of the polyline I am creating.
I would like to stay away from creating a database geometry, if possible.
I have a stair that along one side of the sloping part is a window. I have 2 railings along this stair, 1 is a chair rail, the other is a wainscot panel. Obviously the chair rail and wainscot cannot be built to cover the window.
How can the railings be "cut" around the window?
I know how to start/stop the chair rail, but the wainscot needs to continue under the window (keeping in mind that the window is horizontal and the wainscot is sloping with the stair.)
I'm trying to create a flight of stairs by component (Revit 2013). When I view them in 3D I notice that one of the walls from Level 1 that should be "cut" where the stair run intersects the wall @ top of wall, does not cut and instead goes through the staircase up to level 2. How to get this wall to be "cut" following the rise of the stairs? I've remade the stairs dozens of times and it still does not automatically cut the wall.
View 2 Replies View RelatedWhat's the best way to create tilt up concrete panels? In the screen grab bellow, I used an extrusion, gave it concrete material, and left a 10mm gap between each panel to create that illusion.
Can this be done as a wall, if so how do I add those gaps/voids?
I am looking to create an irregular concrete slab, with barrel vaulted ceilings on a small radial section of a circular slab, and a a parabolically curved upper section to the slab, and a large punched hole in the middle of the slab. To this point, I have been able to achieve this using multiple components and masses, but I was wondering if there was a way to make a single object with a single solid material that may be able to achieve the same effect. I have attached a section for ease of explanation.
View 8 Replies View RelatedI want to create a animation like this with a very Engineering Drawing theme to it: URL....I have also attached two images (stills) from the animation.
The question is, how do I create the "construction" lines (i.e. the blue marker lines) that go beyond the models? Is this something I should consider doing in post?
My current approach is to use planes with textures of the "construction" lines and linked to 3D models. The lines would also look like marker pen/pencil lines.
An alternative could be to use lots of lines and make then render-able but then they would look too perfect and not pencil graphite or marker lines.
I am looking for a way to create a master list of construction notes then use blocks attributes with fields to link to that master list. That way if the master list changed the note bubbles would change as well.
Sheet sets are being used with this project but I can't think of a way to make it work with the existing sheet set technology.
Everything is on one layout/sheet.
Currently there are a total of 3 viewports in an L formation. The fourth viewport, will go in the upper right. But first, I have to get these aligned.
I think the viewports themselves are fine enough. The problems arise because the model is in Model space so, construction line (as far as I can tell) didn't want to snap to a line, (on the model,) in Paper space.(vertical or horizontal) So, I can only see the construction line, in one viewport at a time. Which means, the construction line is not visible in the viewport immediately to the left. So, I can't extend the construction line across both viewports, to to snap them to the construction line.
I'm trying to create an adaptive family (a concrete bleacher/bench) that mitres to its adjoining instances when placed in a project (see attached images).
The family is not acting as I intend it to when loaded into the project (bottom right image). I've created six adaptive points which are intended to correspond to refeence points in the project.
I think the problem has to do with the faces of the extrusion, they don't seem to be able to align to an angled reference plane. How the extrusion can expand/contract in a linear fashion and have ends that mitre adaptively?
So, In this drawing, I have 2 blocks. Stair, and stair section. The one I'm working on is stair section.
What I have is the base of a block that will automatically add steps to the desired height, at a 7" rise and 8" run. I have the array function working correctly. It is inserting correctly, etc.
What I'd like to do is to be able to stretch the frame by typing in the final height of the stairs, and have the length and treads adjust as needed. I'm sure that there is something in the xy parameter actions that I can use for this, I just don't know what it is.
Any good example of ILogic in creating stairs? We generate many different widths, lengths and heights? Been trying to utilize iLogic to make all the different types more easy to create from the start. Have set angle of stringers and certain widths of treads but cannot figure out my rules on the number of treads needed per the length of my always changing stringer lengths. Stumped on how to take a certain length (parameter) and divide it up equally. Top tread flush with top of horizontal stringer and with bottom tread having a minimum and or maximum height the from floor.
View 3 Replies View RelatedWhat is the concrete specification that need included in the drawing?
Send me the template if can..
I have been trying to draw a precast concrete tank and have run into a problem. The tank walls are not constant thickness. At the bottom they are 3.5" thick and taper to 3" thick at the top. Also, the top dimensions of the tank are longer and wider than the bottom dimensions of the tank. My solution has been to draw the outside bottom as a rectangle and offset the rectangle by 3.5". Then repeat this for the top dimensions, set the top two rectangles at the correct elevation and loft them. Then, I press-pull the center out of the tank. This results in a quasi-correct representation of the outside tank but the wall thickness does not taper correctly and the walls are hollow.
View 9 Replies View RelatedI am working on some detail drawings. To save time, I simply modify the previous drawings. However, when i need to adjust the height of, for example, a window, by stretching or pulling, none can have the hatched area lengthened or reduced. In ''quick properties", the associative is not applicable if i change it from N-->Y. I'm wondering if i am doing any step wrong.
View 3 Replies View RelatedI was having trouble importing the surface of my canoe into SAP 2000.
Attached is my canoe surface,
I read that SAP 2000 accepts autocad surfaces, so this should work
I need drawing a set of winder stairs in plan view. I am using autocad 2008.
View 9 Replies View RelatedI have been asked to do volume calculations using Civil 3D for some concrete piles for a oil/survey company. I have done volume calculations for site and land development projects but nothing to do with concrete piles before. It also appears I am the only person with any Civil 3D back ground in the office. I did mention my experience with Civil 3D was limited but I was trying to expand it by looking for Civil 3D jobs and working through the 2012 Mastering AutoCAD Civil 3D book.
I am assuming doing volume calculations for concrete piles is quite different from doing volume calculations for grading plans. The company has been primary using AutoCAD Maps and doesn't have much set up for AutoCAD Civil 3D yet.
I'd like to hatch a parcel with the concrete pattern but it shows broken. I know I could relocate the origin for a polygon hatch but is there a fix for using in a parcel?
Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
Note: Its all Resistentialism, so keep calm and carry on
64 Bit Win7 OS
i have a historic residence i am working on and was wanting to sharpen my modelling skills a bit, but i have a fancy concrete baluster and i do not know how to model it. i would imagine create a profile as a pline and then array it around a center point, but does this make it a 3d model of just 2d items rotated around a 3d point.
View 4 Replies View RelatedHow can I create watermarks in a 3d pdf? Is there a way to do this in AutoCAD before I convert it to a 3d pdf?
View 2 Replies View RelatedNO, I don't have any problem with making a helical hand rail along the circumference of a spiral stairway (or helical stair stringer)!
My only problem is that the method which gives the best visual results (viz. extrude or sweep circle or region along spline) will give a "HEAVY" solid model that HINDERS the performance of AUTOCAD.
Therefore I mostly use the extrusion along a 3D-polyline that gives a a lighter model but less nice visual results (especially when using flatshot for 2D model "representation").
Can I set some system parameters that increase the performance when extrude or sweep along a spline ?
Standard I use a lot of blocks to increase the 3D perfomance of AUTOCAD, this however is not possible when a visual continuous hand rail is preferred.
Just a question about pressure pipe networks in 2013. Is there concrete pressure pipes in the part family, including concrete bends?
View 2 Replies View RelatedHow to create a tag and add it to my tool palettes for future use?
I am using AutoCAD Architecture 2012, and I want to be able to tag the bottom elevation of slabs in my drawings. I found I can create a tag by using the DEFINETAG command and I created text in there that is set to display the bottom elevation of slabs. I'm stuck as to where to go from here. I can't actually "tag" anything with this, and I don't know how to add it to my tool palettes.
I am using Autocad 2013 , and i have download many more hatch pattern from web , But i haven't know how to apply this hatch pattern in autocad 2013 .
View 1 Replies View RelatedI've been having an issue with autocad architecture 2013. For some reason it won't let me create a wall. I can click it but it doesn't want to actually create anything. It just gives me the selection tool. I downloaded the service pack and still doesn't work.
View 3 Replies View Related
