AutoCad :: How To Create 3D Stairs

Oct 18, 2011

I'm trying to create some 3d stairs using autocad 2009 and cannot make it.

Would it be possible to guide me through the steps to accomplish this.

View 6 Replies


ADVERTISEMENT

AutoCAD Architecture :: Create Concrete Construction Under The Stairs?

Jun 21, 2011

I wonder how do you create a concrete construction under the stairs?

The way ACA creates stairs looks like just a top layer (tiles or wood panels), but I want to put those tiles on a concrete construction.

View 2 Replies View Related

AutoCAD Architecture :: How To Create Curved Semi-circle Stairs

Jun 16, 2011

how to create curved semi-circle stairs like the attached image?

View 9 Replies View Related

Revit :: How To Create Railings Along Stairs

Nov 8, 2012

I have a stair that along one side of the sloping part is a window. I have 2 railings along this stair, 1 is a chair rail, the other is a wainscot panel. Obviously the chair rail and wainscot cannot be built to cover the window.
 
How can the railings be "cut" around the window?
 
I know how to start/stop the chair rail, but the wainscot needs to continue under the window (keeping in mind that the window is horizontal and the wainscot is sloping with the stair.)

View 3 Replies View Related

Revit :: How To Create Flight Of Stairs By Component

Mar 4, 2013

I'm trying to create a flight of stairs by component (Revit 2013). When I view them in 3D I notice that one of the walls from Level 1 that should be "cut" where the stair run intersects the wall @ top of wall, does not cut and instead goes through the staircase up to level 2. How to get this wall to be "cut" following the rise of the stairs? I've remade the stairs dozens of times and it still does not automatically cut the wall. 

View 2 Replies View Related

AutoCAD Dynamic Blocks :: Stairs And Dblocks

Feb 28, 2012

So, In this drawing, I have 2 blocks. Stair, and stair section. The one I'm working on is stair section.

What I have is the base of a block that will automatically add steps to the desired height, at a 7" rise and 8" run. I have the array function working correctly. It is inserting correctly, etc. 

What I'd like to do is to be able to stretch the frame by typing in the final height of the stairs, and have the length and treads adjust as needed. I'm sure that there is something in the xy parameter actions that I can use for this, I just don't know what it is. 

View 4 Replies View Related

AutoCAD Inventor :: Example Of ILogic In Creating Stairs

Jan 1, 2013

Any good example of ILogic in creating stairs? We generate many different widths, lengths and heights? Been trying to utilize iLogic to make all the different types more easy to create from the start. Have set angle of stringers and certain widths of treads but cannot figure out my rules on the number of treads needed per the length of my always changing stringer lengths. Stumped on how to take a certain length (parameter) and divide it up equally. Top tread flush with top of horizontal stringer and with bottom tread having a minimum and or maximum height the from floor.

View 3 Replies View Related

AutoCAD Architecture :: Add A Break Line For Stairs?

Mar 9, 2012

How do you add a break line for stairs? In windows it is under 'express tools' but I can't find it in the mac version.

View 1 Replies View Related

AutoCad :: Drawing Set Of Winder Stairs In Plan View

Nov 23, 2013

I need drawing a set of winder stairs in plan view. I am using autocad 2008.

View 9 Replies View Related

AutoCad 3D :: Spiral Stairs Hand Rail Heavy Model

May 13, 2012

NO, I don't have any problem with making a helical hand rail along the circumference of a spiral stairway (or helical stair stringer)!

My only problem is that the method which gives the best visual results (viz. extrude or sweep circle or region along spline) will give a "HEAVY" solid model that HINDERS the performance of AUTOCAD.

Therefore I mostly use the extrusion along a 3D-polyline that gives a a lighter model but less nice visual results (especially when using flatshot for 2D model "representation").

Can I set some system parameters that increase the performance when extrude or sweep along a spline ?

Standard I use a lot of blocks to increase the 3D perfomance of AUTOCAD, this however is not possible when a visual continuous hand rail is preferred.

View 9 Replies View Related

AutoCad :: How To Draw Cross Section Of Timber Winder Stairs As Strings Change Angle

Jun 1, 2012

Just learning 2D CAD and trying to draw a cross section of a timber winder stairs as the strings change angle (I think) at the winder section. Looking at 3nr winding steps.

Setting out a standard stairs is okay, so I have the floor to floor height.

View 4 Replies View Related

Photoshop :: Designing An Image For Stairs

Oct 15, 2005

We have a set of stairs at home that are currently painted white. My wife would like for me to design an image that could be seen clearly from the top of the stairs (such as a tree coming from the basement, etc...) while having another image on the back of the stairs which would be seen from the bottom of the stairs.

Problem : How can I dsign such an image as a one point, I will see both images (when I am at the bottom of the stairs) ? Any ideas ?

View 4 Replies View Related

Revit :: Monolithic Stairs - Get Rid Of Line At Top?

Aug 25, 2011

My stairs go from Level 1 to 2 and join a concrete floor at level 2.
 
The stairs are monolithic.
 
The problem I have is that at the top of the stairs the end riser can be seen and so it appears as an extra tread when viewed in plan.
 
See attached file, the red cross marks the lines which I need to remove.
 
I cannot join the stairs to the slab.
 
How can I remove these lines - is there something better than a masking region? can I set something in the family?

View 2 Replies View Related

Revit :: Stairs Below Level - How To Add A Cut Line

Apr 9, 2012

I noticed that Revit likes to show the entire stair going down.  This works for me in a lot of cases but I have a project that the second floor is showing the stair all the way down to the first floor, and there is another stair going from the second floor to the third that I really need to see.
 
Plan regions don't seem to allow me to add a break line below the second floor and see the stair from the second to the third floor. The floors are on and the view is set to hidden.
 
The attached png shows the up stairs in blue that I would like to see and the Down stairs I would like to cut at the landing.

View 3 Replies View Related

Revit :: Unable To Get Stairs To Cut Half Way Down

Jun 14, 2012

I can't seem to get the stairs to cut say half way down. The normal view range for the view doesn't cut it, and neither does a plan region. Going up is great, I don't see why cutting it down is so difficult...?

View 5 Replies View Related

Revit :: Joining Flights Of Stairs

Nov 6, 2013

I have the following flights of stairs running down one side of my building:

Landing, 6R with 170mm height, Landing, 3R with 190 height, Landing, 7R with 182 height.
 
I've modeled this as 3 separate flights of stairs because of the 3 different riser heights.  The top landing is a floor slab, as is the bottom landing.  I've modeled intermediate landings as either the top or bottom tread of a flight.  How do I deal with the junctions of these stairs? The monolithic concrete will not join.  The materials of both components are set to <By Category>. 

View 2 Replies View Related

Revit :: Stairs Won't Extend Up To Second Floor?

Feb 11, 2013

My stairs won't extend up to second floor. I am using Revit 13 and have created many stairs in past with other models. I have tried stair by sketch and stair by component but they keep stopping about 2 feet short of the floor drawing a standard U shape.

View 2 Replies View Related

Revit :: Base Of Stairs Visible Through Floor

Jan 12, 2013

See attachment.
 
I can't figure out why the bas is visible through the floor :s while the middle  part is not. The part where you can see the color of the stairs is cut out of the floor.

View 7 Replies View Related

Revit :: Removing Riser While Creating Stairs?

Nov 29, 2012

I have been trying to create a stair case but i can not get the top of the stairs to line up correctly. When i do gent one platform to line up the riser sticks up above it.

View 4 Replies View Related

Revit :: Assign New Railing To Be Hosted By Existing Stairs

Dec 22, 2011

How do you assign an exisiting stairs to be the host of a new set of railing?

View 1 Replies View Related

Revit :: How To Change Text Font In Stairs Family

Jan 23, 2013

we are using a custom font throughout the whole project, I need to use the same font within the stairs family , how do I change the "DN" in stairs to the other font?

View 5 Replies View Related

Revit :: Control Height Of Camera For Walkthrough To Go Up Stairs

Nov 11, 2012

I am trying to control the height of the camera for a walkthrough so that I can go up stairs.  I know that I can activate the "Mini Tour Building Wheel" and can do it that way but it is very clunky to use and I don't always get the right angles.  Is there a simple way to control each key frame's heights like you normally would a camera (eye and target elevations)? 

View 1 Replies View Related

Revit :: Monolithic Stairs - Joining To Walls And Slabs

Mar 17, 2009

What is a good way to finish up the monolithic stairs?

- How can I join the top tread to the upper floor slab? (red circle in attached sketch)
- And is there a way to join the CIP monolithic stairs to the CIP walls? (blue circles)

View 9 Replies View Related

Revit :: Sloped Floors - Join With Horizontal And Put Stairs

Mar 22, 2013

I have a situation of one sloped floor connecting two horizontal floors. They build together a continuous surface.
 
I need to join them and have the layers be continuous along the structure. If they were roofs, no problem, I could use the "roof by extrusion" command.
 
Should I do that? If I try to use floors.....
 
When I model them as three separate floors, and then Join them, it doesn't work. meaning that the layers within the floor don't match (well, they can't, in fact! I have to move the floor behind!)
  
If I model one single floor and then add split lines, and move them... it does work. BUT..... I have a stairs on top of it! the stairs have a different slope than the floor, and i need to build a variable layer that fills the void between the floor and the stairs.
 
So my hypothesis was: I put a sloped floor through the slope arrow... and then adjust one variable layer to do the inflill...
 
My dream would be to join then floor and stairs.... The material is the same

View 2 Replies View Related

Revit :: Stairs Not Snapping To Required Level For Theatre

Jun 11, 2012

I have some stairs which I want to be on a certain level however they are not going onto that level. I have made each row of them into a group as they are for a theatre.

View 6 Replies View Related

Revit :: Different Dimensions And Location In Plan And Section Views For Stairs?

Aug 18, 2011

Why am I getting different dimensions and locations in plan and section views for stairs?

View 4 Replies View Related

AutoCad 2D :: Use Path Array Feature On 2013 To Array Stairs

Sep 19, 2012

I'm trying to use the PATH array feature on 2013 to array stairs, and I can't get the array to be 100% accurate. It seems like CAD rounds the decimal to the nearest 3/4" which could be causing the problem.

I set my run to 10.5" and rise to 7.25", array along the angle of the stringer, and there's always a small overlap on the stairs. The "distance between" should be 1'-209/256" and CAD rounds it to 1'-3/4" which is where I believe the error is. Is there any way to fix this or array this correctly? Otherwise...back to the COPY method I suppose.

View 4 Replies View Related

Photoshop :: Lasso Tool Pixelates Like Stairs When Making Diagonal Line

Nov 4, 2008

my lasso tool pixelates like stairs when making a diagonal line! - has anyone experianced the same thing or know how to sort this problem?

View 2 Replies View Related

AutoCAD Inventor :: How To Create ILogic Rule To Create Custom IProperties

Sep 30, 2013

I'm trying to figure out how to create an  iLogic rule that would create a Custom iProperties and put in what version of Inventor the file was last updated with.

View 8 Replies View Related

AutoCad 2D :: Create Arrow Head On Create 3D Leader

Feb 20, 2013

When I "move a dimension with Leader" is there a way to create an arrowhead on the create3d leader. After I create a Linear Dimension I select it and hover over the blue box in the dimension text and select 'Move with Leader" and the leader does not have an arrowhead. Is there an easy way to do this? Autocad 2012.

View 4 Replies View Related

CorelDRAW X5 :: Create Object With A Size / Create Other Objects With Other Sizes

Sep 19, 2011

Let's say, for example, that i create an object with a size, then i create other objects with other sizes. 

When I try to see the size of the first object created it says that has the same size like the other objects which have other sizes (it's even obvius cause they r bigger on my screen:D).With all the other versions of Corel i didn't had those problems, but X5 does that.

View 11 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved