I'm using AutoCAD 2010 and I tried creating an annotative dimension but it won't show up in my viewport unless ANNOALLVISIBLE is set to 1. Both my annotative and viewport scale are set to 1/8"=1'-0".
View 4 RepliesAutocad LT 2007. I pasted an ole object into model space and when I create a viewport in my tab I see the outline of the ole object but the actual image does not show up.
View 9 Replies View RelatedAnnotative text does not show up in viewport even if the correct annotative scale is assigned
View 1 Replies View RelatedI have successfully created one drawing using annotative dims and text - I have set my text to 1:1 scale, height = 30 in paperspace (although I don't get what this refers to when it automatically says it's 30 in modelspace too) and my viewport is 1:20 scale. It's all good, the dims and text look great, which is what I want at the end of the day, however I got there.
But, when I want to set up another detail at 1:40 scale, I can't for the life of me figure out how to make the same dim and text style appear the same size as it was for the 1:20 detail.
If you change a view port scale of a view port that contains a bunch of annotative blocks.
How do you change the active annotative scale of all those blocks without individually picking the blocks.
So all the blocks appear the proper size in the viewport.
This is issue arises when i have been working on a drawing for a while with multiple xref/data shortcuts. The model space text is all the correct size yet once I enter a layout the annotative text relating to 3D elements such as Alignments/Profile Station/Elevation Labels shrink to 1/25 their size. Other annotative objects such as Mtext and Multileaders are not effected. Attached are before and after pictures.
View 4 Replies View RelatedHaving some trouble with some annotative hatches. Notably ones with patterns in them? I am testing them out in multiple viewports of various scales and for the most part they work great. But every so often in a particular viewport they either disappear altogether or shrink to a smaller size and bring my AutoCAD to a dead crawl?
View 2 Replies View RelatedThere are obvious reasons to limit the number of annotative scales while your drafting. I don't know that I'm aware of what file errors/issues can come about from using annotative scales. I've read where you should clean up the scales in your drawing but I'm not sure why?
View 2 Replies View Relatedwhy a standard block, created by autodesk (a dynamic arrow with gradiated hatch to be exact), shows in model space but not in the viewport.
It's not on a frozen layer or non print layer.
i am using:
Autocad LT 2009
Win 7 Pro 64bit, Dell Precision M6500
I have a drawing with several layouts, and in one particular layout only, I want the text to be smaller than the annotation scale would dictate (the viewport is 1"=300', but I want the text to display at 1"=50' annotation scale).
I tried selecting the viewport and changing the "annotation scale" property to 1"=50', then the "standard scale" property to 1"=300'.
Strangely, this seems to work for a bunch of MText objects I have in the drawing, but it won't work for an alignment station label group or for a particular linetype...for some reason, those two things insist on having their annotation scale equal to the viewport scale.
I tried messing around with the alignment station label group's style but couldn't figure anything out. As far as the line/linetype, I'm completely at a loss why that one wouldn't change.
I am trying to create a Mtext object with an annotative TextStyle. I make the textstyle current (which I don't know if is exactly the same as changing the TextStyleId of the mtext object) and create the MText. The problem which I encounter is that the newly crated MText Object has textheight as the textstyle's paper space text height, instead of scaling the text height by the annotative scale, as when you create the Mtext using Autocad menu.
View 7 Replies View RelatedI have a master drawing with multiple xrefed building sketches. Looking at the model space on the "master" I can see all the room identities. However, if I go to the sheets that I have created and look at the view ports. The room identities are not there. The layer is called A-Room-Iden and it is on and not frozen...
View 3 Replies View RelatedI have a viewport that is not showing the hatch pattern. In one layout tab, the hatch shows. In another tab, the hatch does not. The layer is not frozen or off, on the sheet or in the viewport.
Other items and hatch patterns on that same layer show up. The display is set to 2D wireframe. I even cut - paste a viewport from the working layout tab to the non-working layout tab and the pattern disappears.
I have a piece of my 3D model (it's a square tube with rounded corners) that I'm trying to display in a viewport in 2D but there are too many surface lines on the corners. Is there a way to display the rounded corners as sharp edges and the hidden lines of the object?
View 9 Replies View RelatedI've got a drawing that contains an XREF. I've got a field reading the viewport object's Custom scale>Use scale name. However, whenever the drawing is loaded up all of the XREF's scales get imported. Since they contain the same scales, the field changes to read the XREF scale instead of the one it was set to. They are the same scale, but the field reads the XREF one first. Here is a screenshot showing what I'm talking about. Notice that the viewport's properties never show the scale as 1:20_XREF, but the field does.
I've been having to click "show all scales", do a SCALELISTEDIT, remove the XREFs, then do a UPDATEFIELD. I have to do this every time the drawing is open. It stays that way until C3D is closed. This becomes a problem when I go to PUBLISH a sheet set. If I haven't opened all the sheets in the sheet set and changed the scale list then they all get the wrong scale list shown.
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
For some reason my line type is not showing up properly in my viewport. In model space my lines are dotted, but when I go to viewport they show up continuous??
View 6 Replies View RelatedWhy a layer state assigned to a viewport can only restrict the layers showing? I want my viewport to show the proper layers all the time, even when those layers are not visible in model space.
C3D 2012 SP2.1
WIndows 7 SP1 64 bit
24GB RAM
Dual quad core xeon 3.2ghz cpu's
Triple Monitors
I am running Autocad arch 2011 (as Autocad 2011) and a co worker is using Autocad electrical 2012 and when he works in a drawing of mine the every annotative scale that is used in the file is attached to every annotative object. Which means I have to go through every object and delete scales that should be be there....all my annotative objects appear in every view port because every annotative object has every scale..
View 2 Replies View RelatedI've switched lately to 3ds max 2013... the problem is when i'm working i can't tell if the direction of normal of the faces cause both side of the face is looking the same... i guess the back face was a lil darker back in 2011 and before...
just wondering if this is the normal behaviour for 3ds max 2013
I'm using core 17 2.8 GHz, 16 G of ram and Geforce GT 540
i just upgraded to max 2012 and the default setup on mine is showing up very bright for some reason. like the ambient setting is at 50 but its set to solid black in both the material and the environment panel. i went through my normal routine of checking the exposure control and nothing.
View 2 Replies View RelatedHow do I make annotative tags, callouts, and blocks non-annotative. AutoCad will not let me change them in the properties tab.
View 1 Replies View RelatedI have a co-worker who needs to create a block where the attributes scale with the anno scale, but the block container does not. He's creating a tree block and wants the canopy and trunk attributes to scale without scaling the tree symbol.
Making an attribute annotative and applying the scales to the attributes doesn't seem to work if the block itself isn't annotative.
Are we missing something, or is this just not possible?
Is there any trick that bring in an annotative block into a drawing at the annotative scale you are working in, not the scale the block was created in?
View 2 Replies View RelatedI am sculpting a bust and want to use Projection Stamp image to paint the diffuse map. However, the image is not showing in the viewport.
My model has 6 levels with 6+ million polygons. At none of the levels the image shows in viewport.
I'm using Nvidia GTX 560 Ti, 1G
Windows 7 Pro 64bits.
cpu i7 860, 2.8 ghz
16 GB rams.
However, when I start with the mudbox standard base head mesh, then choosing Stencil image, the image shows in the viewport. But not with my 6+ million bust and the image is On it's not hidden.
Is there anyway I can optimize Mudbox to display the image in viewport?
I probably changed a setting in Maya 2010 and did not know the bigger implications. How to reset maya's viewport settings back to a normal state?? If I have to re-do any of my two plug-ins, that is ok. Last time I messed with maya it was version 5.
I have many, many models done in 3DS, Max and Blender that I am trying to convert over to Maya (my day job's 3D IDE).
I can view any maya (mb, ma) files with no problem. But today, I am having issues viewing results of simple 3DS imports in any viewport of maya.
The attatchments are of the same file (.3DS) being imported to blender3D and of Maya.
A problem I do not have in CS5 - painting/stamping/blurring etc on a 3D model is showing up in unwanted, unseen areas of the model. I have tried narrowing the falloff, selecting paintable areas. Is there a setting I'm missing that fixes that in CS6?
View 2 Replies View RelatedI have multiple viewports on a layout.
I want to be able to edit the object through the viewport, but NOT change the object in ALL the other viewports as well. In other words, I want to INDIVIDUALLY/EXCLUSIVELY edit the object of each viewport (i.e. in my A, B, C, D, E, windows in the image) without affecting the rest of the others.
Is this possible? If not, is there a workaround?
When i'm working in maya 2011, my mesh is not showing the 3 smooth in the viewport. What's the reason behind.
View 1 Replies View RelatedI'm having an issue with viewports in a drawing not displaying the color of the objects in model space. All of the objects are set to display bylayer, and all of the viewport overrides in the drawing are off. Still, the objects will only display as either white or grey through the viewport, even though the colors show up fine in model space. I've also tried making a new viewport and it also displays everything as either white or gray, so I'm thinking it might be some kind of system variable that I don't know about.
View 2 Replies View RelatedI am working on piping plan. I have four differents pipes on same layer. I would like to change color of one pipe in active viewport and keep the layer color unchanged in same Viewport. I would like to keep the layer color unchanged for model space or other viewports.
Is there any way to change the property of an object in active viewport?
I currently have a viewport - it is an a1 rectangle in size, lets call it VP1. I would like to create a smaller viewport inside of this, lets say VP2.
When I draw a circle, and use the tool 'Convert Object To Viewport' everything works great - but now VP2 has all of the objects from VP1 showing through the background too. How can I resolve this?
I have been looking for something in the properties, much like text, which will 'background mask' to the viewport - but I am struggling to find any thing.