I am having a problem when attempting to measure the volume of a solid in Autocad Civil 3d 2013. It returns an error: "One or more diagonal terms are not positive." I have run a check from solidedit and it returns as a valid solid.
View 3 RepliesI am facing a problem here: I need to create an explanation of a 3D model (means there is x, y, and z coordinate) in 2D terms.
The base shape is something like this: [URL] ........
What I want to show is the part where the lines are joint. There is a lot of angle involved, the standard polygon angle and the dihedral angle.
What I want to show is the dihedral angle, around the joint but no lines are actually parallel to any of the axis. Therefore, how to explain properly this part to layman (contractor, client, etc).
I tried researching using the keyword "3D CAD drawing", and "3D Detail Drawing" but nothing comes to fruition.
I have PS 8 (in spanish) and although I live in Mexico, most tutorials on the web, are in english. I would like to know where I can get a translation for some of the menu terms for translation from english to spanish. The one Im trying to figure out now, is one of the options for a high pass filter is "hard light" not sure whats the corresponding name on my PS in spanish.
View 2 Replies View RelatedI'm about to buy a new inkjet printer. I currently have an epson R1900 which I have liked, but I have been abusing this printer for years and it just stops working I'm thinking about the epson 3880 or R2000? but I wonder what some of you might recommend.
I'm a graphic and web designer. Would 3880 have more efficient way to print - in terms of ink usage?
So i can create a photo strip in Lightroom and i have (just adding 2x2.5" cells and dragging pictures over) but after trying to add an additional picture it changes all the cells to the new picture. After researching it seems that Lightroom wont let you add/print different pictures on the same sheet. So i have two questions:
1. Can you not add mutiple pictures in terms of a photo strip and print out in Lightroom 4?
2. What adobe software (or even apple aperture) can you create a custome photo strip and add text for the event at the bottom and print? Preferrably something that is simple for like when my Canon 7D takes pictures and you can drag and drop into the cells, determine # of prints and print, on the spot. I am starting a photo booth company where person #2 will manually move pics on my Macbook Pro (if need be) to the photo strip template and determine # of prints (not automated).
I've not seen it mentioned anywhere so I must ask. When in 3D modelling, is it possible to set AutoCAD to constrain drawing and movement in only the positive Z axis? I'd like to draw obviously in the XY plane but also only in positive Z (above ground?). I don't think i'll ever need to draw anything in the negative Z plane, which by my understanding would be actually underground (correct??). If it is at all possible to constrain in the positive Z plane, would there be a way to temporarily over ride this for the times I may need to Press Pull a hole out of a solid?
I have this strange knack of drawing in Top view in a left viewport (model space) then extruding in the right SW viewport then sometimes when I try ti move objects the end up underground (negative Z plane).
I'm getting the following error:
ERROR 517 : Error in reading TR-20 project data.
but when I compare my raingage input to the one in samples it appers to be correct. Is there someplace else I need to be checking?
I have a macro to create DXF files for all sheet metal parts in an assembly. What I now want to add is 2 functions :-
Move the DXF output to be in the 1st (positive) quadrant so that the left most entity is touches with the Y axis and the bottom most entity touches with the X axis,Add iProperties like Part Number, Material, Thickness and Qty as text to the DXF file.
Any takers?
***********************
HP Z420 Workstation, Windows 7 x64, 64 GB Ram
Intel Xeon E5-1620 @ 3.60 GHz, ATI FirePro V7800 2 GB
3*Dell 2007Fp monitors, SpacePilot
Inventor 2013 PDS Premium & Service Pack 2 with Update 3
Vault Workgroup 2013 with Update 2
I have in the past needed to create filters that had both a positive AND a negative in the parameters.
One of my most common examples: Layers in a specific XRef with names that do not contain specific string.
I tried XRefName|*[~anno]* and it gave me ALL the layers from the XRef (including the ones with anno in the name).
I also tried XRefName|*~anno* and it didn't list ANY layers.
It it possible to do this? I've read throught the docs on using wildcards in the filter properties but don't see anything.
I want to create a positive form of the inside of a differential housing.
My idea was to put two planes on the edges of the housing. Then using the Sculpt Tool to create a New Solid of the inside of the housing.
With the Derive Tool i could seperate the two Solid Forms from each other.BUT... When I want to create a New Solid with the Sculpt Tool I get the error ' Create Sculpt feature failed'.
I've tried to Derive the part to a Sureface model, but that didn't work.
I'm want to reproduce a differential housing. Therefor I need a part which is identical to the inside of the housing. In other words, I need a positive part inside of the housing.
I've tried to do this with Derived parts by placing the differential housing in a large block. But then I get a block where lining of the housing is missing. So i can't do anything with this derived part.
I have attempt to upload the file, but it is too large. Even when i try to compress it.
I am trying to dimension a line that is not parallel to either they x or y axis. When i try to dimension the line it will only let me dimension the vertical or horizontal component and not the diagonal length. I have included a picture of what I am referring to.
View 5 Replies View RelatedI am trying to dimension a line that is not parallel to either they x or y axis. When i try to demsion the line it will only let me dimension the vertical or horizonal component and not the diagonal length. I have included a picture of what I am reffering to.
View 2 Replies View RelatedHow can I take a scan of a negative and convert it to a positive image with cs5?
View 2 Replies View Related[URL] ......
I'm trying to place the blue circle at the bottom of the drawing so its radius is 15mm from the mid point of the diagonal line on the right. I've been experimenting with snap points and the from command, but I can't seem to get it just right. I suspect I mess up with the coordinates from the offset point since it's on a diagonal line.
I am photographing 2 1/4 negatives with a CANON 50D and macro lens. Then in Photoshop CS3 I was looking for the filter to convert the negative film file into a positive file so I can work on it with Adobe and then print in on my Canon printer.. I have tried to sample the orange base color and take that out and then invert and then increased the contrast curve.
View 1 Replies View RelatedI want to produce three positive transparency (C M Y) "films" that I can lay on top of each other over a white light for demonstration purposes (to simulate the behaviour of a slide film). Obviously each film has to be printed in its own colour (Y, M, C).
View 1 Replies View RelatedI quickly created a roof and changed the view display to "sketchy". When I show the roof in top view diagonal lines are shown on the sloped surfaces. How do I get rid of them?
View 1 Replies View RelatedWonder if can Can Image stretch from left or right or top or bottom side instead of diagonal ?
Reason is picture or tiff not correct length to the object of build.
I did scale to right length on "X" but the "Y" is off so how ?
I know that in Photoshop have stretch all side whatever I want but not in autocad 2011
I am fairly new to autocad - sometimes when I draw a rectangle little grey squares appear with red and black diagonal lines in?
What are these and how do I toggle them off and on?
I have a screenshot
I have scanned a negative. Where is the option to create a positive image from the negative image?
View 1 Replies View RelatedI have just scanned a color negative into photoshop and lo and behold it comes up on screen as a color negative. How do i now convert it to a positive so that I can work with it.?
View 11 Replies View RelatedPhotoshop CS6. Win 7 32 bit. Sophos Anti virus is reporting that WIASupport.8LI contains malware Troj/Zbot-DHN and quarantines it. This has just started to happen today.
View 4 Replies View RelatedI have Premiere elements 10 I need to know how to change a negative to positive image
View 1 Replies View RelatedI can't find a way to turn a negative image into a positive one. !
View 3 Replies View RelatedI have created a column graph with a large amount of data. I would like to apply two different colors to the positive and negative columns. Whenever I click on a column and go to object>graph> the column section is unavailable. I checked to see if the graph had become ungrouped, even though I never selected it. If I select the graph as a whole it does not say ungrouped. When I select a column the ungroup tab is greyed out. Does that mean my columns are ungrouped?
View 6 Replies View RelatedA plotting issue that has never been addressed perplexes me! When working in a paperspace layout and trying to plot or print by window or display, I get a partial print or nothing at all. Typically, I will get a partial print showing the drawing above a diagonal line. This has plagued me through many versions of Autocad.
View 4 Replies View RelatedI am a newbe with pro4. How do I change a scanned negative image to a positive image? swap black for white and vis versa?
View 10 Replies View RelatedI need a plugin that can invert positive and negative space with transparency.
Example: I have a filled square in the middle of a transparent image. I use the plugin, and the square is now transparent, where as the originally transparent space is now filled.
Visual example:
Of course, I need this to do more complex shapes. Also notice the blur is accounted for.
I can scan and preview an b/w negative but it will not show up on the work screen after being scaned. I can scan a b/w neg and then reverse it to a positive for printing !!!!!!
View 2 Replies View RelatedWhen scanning negitives, is it possible to change it to a positive image?
View 2 Replies View Related