AutoCAD Civil 3D :: Xref Has Multiple References - Not Detached

Apr 8, 2013

I know the difference between attach and overlay for reference files. 

The problem here is that the xref IS attacehd as an overlay and I am still not able to detach it.

I am working on WisDOT transportation plans.  For those that are not familiar with these projects, certain reference files must plot black in some plan sections, but grey in others.  When we submit the plans to the utility companies, all utilities must be black. but are grey in everyother submittal.  I changed the xref level attributes to plot black with the intensions of detaching the xref and reattaching to revert back to the orignial grey level attributes.  Is there anyway that changing the level attributes is somehow not letting the xref be detached?

Intel Core i5-2500K CPU @ 3.30 GHz
8.00 GB
64-bit

View 1 Replies


ADVERTISEMENT

AutoCAD 2010 :: 2012 Xref Has Multiple References / Not Detached

Oct 31, 2012

I'm in AutoCAD 2012. This xref won't go away. I've done the obvious fixes but can't get rid of it.

View 4 Replies View Related

AutoCAD Architecture :: XREF - Multiple References

Mar 5, 2013

ACA2011.I've got a construct that for some reason has 2 xrefs listed within it that I can't detach. It says that it is unresolved and when I try to detach it it says "c_Floor Plan - First" has multiple references, Not detached." This is one of two xrefs in the drawing doing this...how is it possible to have an xref of the same name in the drawing? I can't figure out how to detach it. It was causing problems in the view to which it was referenced, and I solved it by creating a bogus, blank construct called "test" and changed the path of the xref in the construct to this drawing...but I still can't detach it.

View 2 Replies View Related

AutoCAD Civil 3D :: Creating Multiple Data References?

Feb 9, 2013

Is it possible to create more than one data reference at a time?

I have approximately 30 alignments with over 100 profiles in my profile design drawing. The interface to create the data shortcuts allows me to do so by selecting multiple alignments and profiles. This works well and is efficient. To create the data references I have to create the reference for each alignment and profile one at time. I estimate this will take at least 30 minutes.

I am using Civil 3D 2012.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600

View 1 Replies View Related

AutoCAD Civil 3D :: Data Shortcut File Names With Multiple DS References?

Nov 26, 2012

I have a data shortcut file where i keep my EG surface that now has File Name.dwg [DS] [DS] [DS] [DS]. What's the deal? Has this managed to morph itself into something it's not. It used to have only one, had two for awhile, and now 4 references to the DS (Datashort cut project folder).

Have I done something wrong here to get these wonky file names, would be nice to see just 1 reference being made to my DS Project folder.

View 2 Replies View Related

AutoCAD Inventor :: IFeature With Multiple References - Placement

Jan 21, 2013

Im just starting to look at I features to design, but even though my sketch is fully constrained when I place the iFeature with multiple references i can still move it using the arrows. How i could place them more accurately.

View 2 Replies View Related

AutoCAD Civil 3D :: References Not Updating

Aug 15, 2013

I have a recurring problem that I can't seem to figure out.  I have my existing grade TIN surface as a data shortcut into my roadway design file, but it sometimes will not update when opening the drawing.  The surface profile will not display until the surface is manually synced.  Any labels that are associated with that surface (or other object) will just display the ??? because it can't seem to connect to the data.  After a manual sync it seems to come back.

View 9 Replies View Related

AutoCAD Civil 3D :: Sorting Data References

Dec 3, 2012

How do you sort data references?

[URL].....

Civil 3D 2012 (64)
Windows 7 Pro (64) SP1, 16 GB
AMD Radeon HD 6900

View 8 Replies View Related

AutoCAD Civil 3D :: Broken Data References?

Jul 8, 2013

Possible to open a drawing that was created with AutoCad Civil3D 2011 and create all of your Civil objects and data references if it is a bad idea to then open it at a later date in AutoCad Civil as Autocad 2011. Does this effect any of the data in the drawing. It has been recommended here that we do this for making minor line/text edits as some folks have slower computers that cant handle the civil side of the program.

why we are constantly facing corrupt drawing files that lose references.

View 4 Replies View Related

AutoCAD Civil 3D :: Crashing Due To Data References

Jul 8, 2013

A co-worked has made a mention of "Reference Alignments not found in Reference Drawing" error message popping up multiple times this morning and said he thinks it is a trendd in many drawings that have been worked on. In my experience this message pops up if you move the location of the reference drawing, or change the name of the alignment without synchronizing.

The issue is it has been said that this is fatal erroring the drawings.

I have not worked on the project myself and am just relaying what i heard-

I know this is a very vague question, we have 2011 Civil 3d

View 1 Replies View Related

AutoCAD Civil 3D :: Searching For Textstyle References In Styles?

Jun 18, 2012

C3D 2013.Is there a way to search the C3D styles for references to textstyles?

IOW - I know there are references to a certain textstyle in this drawing, how to find it/them without manually inspecting each style?

View 8 Replies View Related

AutoCAD Civil 3D :: Labeling Profiles From Data References

Nov 17, 2013

We recently started using Civil3d 2013. We made a huge jump from LDD 2008. We have profiles designed and data short cuts are created. We have existing and proposed. 

Now i've created a reference and brought them into another drawing. First I tried to set up the color and linetype for each profile. When I do this. Both the existing and proposed become the same color and linetype.I do not see how to select the existing from the proposed and set the color and linetype.

Next I select the proposed profile and right click and select Edit Labels. I start to create the PVI labels. When I do this the PVI's for the existing profile get labeled. I want the proposed profile labeled. Not the existing.

View 3 Replies View Related

AutoCAD Civil 3D :: All Autodesk Files And References Were Removed?

Aug 21, 2012

After using Autodesk recommendations for a clean install, remove programs, remove files and remove registry edits I can not delete the file

C:Program FIlesCommon FIlesAutodesk Sharedacsigncore16.dll

How this file is still in use if all Autodesk files and references were removed?

View 4 Replies View Related

AutoCAD Civil 3D :: Data References Cause Program To Freeze

Apr 5, 2012

We just discovered data at our office, and I am pretty stoked about them 90% of the time. We do have one problem with them though. We are doing a small road, with 10 or so alignments and a few pipe networks of 40 pipes and structures. 1 surface, and that is about it. I made a cross sections sheet with our design file xrefed and data references to everything in it. Now it won't open. I can copy it to my local hard drive, run a recover, and then open it, save it back, add in all the data references and redo labels, but I can't open it from there.

Is there some way to have it open without syncing?

View 5 Replies View Related

AutoCAD Civil 3D :: 2012 - Find References To JPG Files In Drawings

Dec 30, 2013

URL....I have a jpg file that I needed to apply some transparency to and saved it as a png file. I now want to delete the jpg file but it's being referenced in several drawings, but I don't know which ones. Is there a way to reverse the function of Reference Manager, ie find all the drawing files that reference my jpg file?

View 2 Replies View Related

AutoCAD Civil 3D :: File Contains External References Function Fails

Jun 27, 2013

I'm trying to adjust the properties of some block objects in Mspace. When the file contains external references the function fails, when it has none it works perfectly.

Dim modelSpace As BlockTableRecord = DirectCast(M_trans.GetObject(SymbolUtilityServices.GetBlockModelSpaceId(db), OpenMode.ForRead), BlockTableRecord)
                For Each id As ObjectId In modelSpace
                    Dim ent As Autodesk.AutoCAD.DatabaseServices.Entity = DirectCast(M_trans.GetObject(id, OpenMode.ForWrite), Autodesk.AutoCAD.DatabaseServices.Entity)
                    ent.Color = Color.FromColorIndex(ColorMethod.ByLayer, 256)
                  
Using the above to get all objectid's and filter through them then using:

  If TypeOf ent Is BlockReference Then
                            Dim br As BlockReference = DirectCast(ent, BlockReference)
                            Dim btr As BlockTableRecord = DirectCast(M_trans.GetObject(br.BlockTableRecord, OpenMode.ForRead), BlockTableRecord)
                            If Not btr.IsFromExternalReference Then

View 6 Replies View Related

AutoCAD Civil 3D :: Errors From Mixing Data And External References

Aug 20, 2013

Here is the background.  

A "MODEL" drawing exists that contains only the surface model.  The surface model is data referenced into a "LABEL" drawing that contains the surface style (contours), contour labels, and spot elevations.  This "LABEL" drawing is xref-ed into a "SHEET" drawing that contains the title block and some other xrefs containing the proposed layout, ex cond, etc..

When I open the "LABELS" drawing, the data reference works.  My problem is that when I open the "SHEET" drawing, the contour labels and spot elevations cannot find the referenced surface and just contain a string of 20 or so characters.

I already have a workaround.  If I open the "SHEET" drawing, then open the "LABELS" drawing and save it, I can reload the "LABELS" drawing within the "SHEET" drawing and the problem is solved.

HOWEVER, I have a bunch of sheets that I want to publish, and publish does not work when you have to open the file and re-reference everything.  Is there anyway to get this reference working correctly so that I do not have to open multiple drawings to get my data correct?

FYI, I have already tried resetting my data shortcuts project folder, validating data shortcuts, etc. in the "LABELS" and "SHEET" drawings.

Civil 3D 2012, SP 2.1

View 2 Replies View Related

AutoCAD Civil 3D :: Drawing Has Disassociated Surface And Alignment Data References

Aug 28, 2013

I am working on roadway project where I am using Pipe Networks to layout the drainage infrastructure.  I have set my working dwg up so that I am data referencing the existing surface and proposed alignment.  I have set my pipe network up so that it is also referencing this surface and alignment.  Everything was working fine.  Labels were pulling the correct information from my surface elevations, and stations were being referenced as well, until I got a message that recommended that I recover my drawing. 

I ran recover and my surface and alignment data shortcut disappeared. My pipe network now shows questions marks where there were once stationing and it appears that the surface and alignment have completely disassociated themselves from my drawing, however they appear in the prospector, but cannot be refreshed.  Again the data shortcut symbol is no longer next to my surface and alignment, but there is a symbol telling me that those objects are being referenced by another object in my drawing (my pipe network).   I have tried refreshing, resetting the working folder, all to no avail. 

View 1 Replies View Related

AutoCAD Civil 3D :: Opening File Gets Stuck At 50% Synchronizing References For 5+ Minutes

May 11, 2012

I have a file that looks like it is going to open nice and fast and then it gets stuck at 50% synchronizing references. It literally takes over 5 minutes for the file to come completely up and ready to work on.

In the file I have an existing ground surface data reference and two corridors (with alignments, profiles and profiles views) that are basic access roads roughly 1200' long each with a very basic assembly. I also have a pipe network data referenced that is just a bunch of pipes that represent existing utilities crossing the access road so I can show them in cross sections. The final thing I have in here are 50' cross sections for each of these access roads.

 why does it take me 5+ minutes to get into this file?

View 4 Replies View Related

AutoCAD 2010 :: Multiple Masks Of A Single Xref

May 23, 2013

I can't mask more than 1 area of an xref. 

If I mask one area in model space, then I try to mask another, clicking no delete of previous boundary, it still won't let me do it.  I need to mask many small pieces of an xref in the model space. 

View 6 Replies View Related

AutoCAD 2013 :: Multiple Xref Layers - How To Turn Off At Once

Sep 18, 2013

I made an autocad file. with many xref files. there are layers. and the layers are all the same, only the name for the layer its the name of the xref link . but how can i turn it off at once.

View 9 Replies View Related

AutoCAD 2013 :: Tracking A Block Or Xref In Multiple Drawings?

Jan 29, 2013

I am trying to come up with a way to track a block or xref in multiple drawings. I have multiple drawings that have the same block in them and I was hoping that there was a way I could find out what drawings have the block without having to open up every single drawing.

View 2 Replies View Related

AutoCAD 2013 :: Leaders Lost Vertices And Detached From Mtext

Jun 27, 2012

While working in a drawing, I noticed that my leaders looked a little odd.  They had ALL lost their verticies and upon further investigation I realized that the mtext is no longer attached to the leader (i.e. when you select text and grab the grip and move, the leader, text end, does not follow).  Start a new leader command, and all is well with the new leader and text but the old leaders remain disconnected. 

This is a new file originated in 2013.  Audit was 0.  Restarted AutoCad, checked a bak file and auto-save, no changes to mleader settings or attachments. I do no recall executing any out of the ordinary commands or changing settings. 

View 2 Replies View Related

AutoCAD Architecture :: Xrefs Detached When Files Are Moved To Dropbox

Mar 26, 2012

Our office recently moved all of our project files to the dropbox. Now when I open files with xrefs I have to attach them back into the file. However, this doesn't happen for my coworker. She can see all the xrefs. How could I solve this? The file names or directory has not changed.

View 2 Replies View Related

AutoCAD Civil 3D :: Manhole Label Inv References Adjacent Null Instead Of Next Manhole

Jul 24, 2013

I have a sanitary run manhole to manhole with null structures in between for lats.  Each null is named "wye(lot#)" which I really do not need labeled anywhere but grants me the illusion of order and control.  When I label the manhole (style uses text for each component) it references the inverts as from adjacent structure the nearest of which is the null.  I need it to reference the upstream manhole as the from structure. BMP?

Another issue is the text for each component.  There are times when I need to have the manhole label show "INV 8" IN 209.50 Int Drop (MH110)" or "INV 8" IN 208.75 w/ Slide (MH 108)".  But as you know if I add to one I add to all.  I found a post that discussed editing the xml to do this but my code either looked different than the example or I was looking at it cross eyed.  I think if I could add an invert type column to the structure properties pipes tab the text for each component could add it to the label.Is there a better way people have been handling this?

View 3 Replies View Related

3ds Max Modeling :: Normals Are All Messed Up On Detached Object

Apr 19, 2013

I think I started noticing this problem in 2013, but not sure. It's definitely happening in 2014 still.Basically I import an obj file. It looks fine, but there are a few parts grouped together. I grab them by selecting element, and detach. Boom! Now the normals are all messed up on the detached object.

and the same thing happens often when attaching other objects. Sometimes the normals just get flipped completely around even.

View 1 Replies View Related

AutoCAD Civil 3D :: How To Make Multiple Settings For Page Setup In Multiple Layout

Apr 4, 2012

Looking for step by step for multiple page setup setting in multiple layout, i use autocad civil 3d 2012.

View 1 Replies View Related

AutoCAD Civil 3D :: Sample Multiple Surfaces For Multiple Alignments

May 18, 2012

I need to figure out a way to sample multiple surfaces for multiple alignments.

Example 1: I am creating cross sections for a river dredge showing the pre-dredge bathymetry, design dredge elevation, and post-dredge bathymetry results. I have 100's of alignments that I need to sample 3 surfaces and display in profile view. Due to the clients requirements for display, using the cross section tools don't work for me, so I have resorted to using a seperate alignment for each cross section.

Example 2: Working in a subdivision with many utility alignments it would save quite a bit of time to be able to choose a group of alignments and sample multiple surfaces in just a few clicks. 

View 3 Replies View Related

Paint Shop Pro :: Tool Options Palette Becomes Detached?

Dec 23, 2011

The Tool Options Palette which normally resides in one of the bars along the top of the screen in the Edit Mode becomes detached. Basically undocked and positions itself somewhere else.I can drag and move it around but I cannot reattach it. It appears like a separate tool bar or palette in that it has its own status or title line across the top with the X to close at the right edge.

It responds normally as to all of the tools on it which correspond to the specific tool selected. The palette floats on top of the screen so finding a place to put it where it will not intrude on the image or other pallets or tool bars is a challenge. When the palette becomes detached like this, the line where it had resided above the work area no longer exists.

I don't recall conducting any particular task or operation which caused this to happen. I just noticed that it was no longer in its place and was now floating in a spot on the right side of the screen.

View 3 Replies View Related

GIMP :: Cannot Dock Windows - Tool Option Detached

Oct 19, 2013

I have a problem docking the windows. The tool options window somehow detached itself and I just can't figure out how to dock it again.

There are a couple of very light colored lines which are used for docking. I don't see any lines on the "Tool Options" window or any other window for that matter.

Ubuntu 13.10
GIMP 2.8

View 1 Replies View Related

AutoCAD Civil 3D :: Attempting To Xref PDF

Jan 11, 2012

I am trying to attach pdfs to my drawing.  I am receiving the following message "acdwfmarkupcore.arx cannot find a procedure that it needs."  I am also receiving a message that says the pdf (file) is corrupt.  I have opened the file and it appears fine.  I have even tried re-saving the original document under a different name. 

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved