I am trying to attach pdfs to my drawing. I am receiving the following message "acdwfmarkupcore.arx cannot find a procedure that it needs." I am also receiving a message that says the pdf (file) is corrupt. I have opened the file and it appears fine. I have even tried re-saving the original document under a different name.
View 5 RepliesMy program crashes when attempting to edit a pipe network. specifically when trying to draw a pipe the program crashes the instant I select the second point to place the pipe.
View 3 Replies View Relatedi type in xr and the box shows up but when i go to attach a dwg or image the box usually shows up so i can browse through and find the dwg i want to xref but the box doesn't show up all it says at the bottom in the command line is ATTACH
If i use the command classicxref then everything is fine i can attach anything i want. i checked the filedia and it is set to (1)
I am xrefing a DGN file into my DWG file in Civil 3d 2012. When I go into Layer Manager I cannot see any of the DGN's Levele/Layers? Tell me this isn't so? Am I missing something here, how is one suppose to control Layers in the DGN when it is XREF'd into a DWG?
View 4 Replies View RelatedWhen i change a linetype in an xref file and then reload the file, The linetype does not change in the file i am referencing the drawing in, leaving me to manually change the linetypes within the drawing.
View 1 Replies View RelatedI am having problems bringing in an xref dwg in a viewport. The scale for my stationing labels are huge and I cant remember how to fix it.
View 8 Replies View RelatedDrawing contains Xrefs which are either unloaded or unresolved and do not show up in the base drawing.
I am unable to reload but can detach some of them.
When I try to Xref a new file it does not function. Makes no differerence whether its an attachment or an overlay.
Can I somehow xref a surface into a drawing and use it to create profiles, sections, gradings etc?
View 2 Replies View RelatedEvery time I attach an XREF file, the xref drawing is shaded and is very difficult to see. Having looked through a good deal of the COMMANDS & properties trying to make Xref's more visible, without binding them into my original drawing.
View 5 Replies View RelatedI have an xref...I can see the labels in model space but when I go to paperspace, I can not longer see them.
View 9 Replies View RelatedI am getting a lot of grief xrefing a C3D file into an AutoCAD drawing. A bit of background...
Fairly large development project with 270 new familiy houses. The sanitary sewer (SS) network was created using AutoCAD only. All layout drawings and xrefs were created using AutoCAD using AutoCAD templates. Then, here I am, putting the entire SS network in C3D, with its fancy labels and relevant long sections. Now I am supposed to display this C3D network in all the layout plans and get rid of the old 2D SS xref. Well, the blody thing doesn't work! If I try to xref the original C3D file, it will only display the labels. All pipes and structures and long section do not display. Yes, I checked all layers are turned on.
I tried using data shortcuts instead, bringing first the relevant part liist and styles. No luck. Again neither a single pipe nor structure is diplayed, although the prospector in the toolspace shows the network is referenced in the drawing. I am not sure if this matters, but the C3D source drawing contains a second pipe network referenced using data shortcuts which, by the way, doesn't display either when xrefing. I tried xrefing the C3D file using my C3D template and it works fine. So I guess that, somehow, the AutoCAD template used to creat the drawings is preventing some C3D objects to be displayed when xrefed.
I know I could recreate all our layout plans using my C3D template. Unfortunately, that would be a long process since we have quite a few and they're all heavily xrefed, with many layer properties overriden.
C3D 2011V2. Windows XP 64b
I'm writing a .NET app to get corridor feature line information from an XREF'd dwg file to use in the active document. I'm having quite a bit of trouble reading the civil objects from the XREF.
[URL]........
This works, but still doesn't work for civil objects. Take a look at the snippet below.
if (xdb != null) { // Start a transaction in our loaded database // to get at the layer name Transaction tr2 = xdb.TransactionManager.StartTransaction(); using (tr2) { // Open the layer table LayerTable lt2 = (LayerTable)tr2.GetObject( xdb.LayerTableId, OpenMode.ForRead );
In order to get a Corridor ID collection I need a reference to a CivilDocument object. So how do I get a CivilDocument object when it isn't the active document? Is there any way to get it from a Document or Database object?
I created a pipe network in civil3D and now I want to insert it as an xref in an autocad file. The problem is that when I do so, I lose some properties, such as the hatches in the directional arrows of the pipes and the background mask property of the structure labels.
View 2 Replies View Related I'm trying to get a handle on what should and should not be expected to work as far as labeling XREF'd entities goes. I'm using 2011.
I have recently had bearing notes associated with an XREF'd line disappear, and I can't pinpoint the cause.
I had edited a couple of lines in said XREF'd drawing, but NOT the one that was associated with the C3D notes. There are two C3D drawings that XREF this drawing and that have line labels applied to the same, unchanged, line. Yet, all of those labels were gone (in both drawings) when I opened them this morning.
So, should labeling an XREF'd entity work? Are labels predictably lost when a labeled line undergoes a known set of modifications (Sinc relayed his experiences here: [URL] .....
What if the XREF'd drawing is simply saved, with no changes made to a labeled line? Should that be okay?
If labeling XREF's is known to be unpredictable, it sort of puts us back to manual text labels and manual curve tables. Is that really what people are having to do?
I am having a issue when I open a drawing with a profile or a surface xreferenced into it, the profile drawing or the surface drawing needs to be reloaded every time in order for it to appear. This becomes very cumbersome when we try to publish a set and have numerous plan and profile sheets and then the profile doesn’t appear. We have six identical machines in our office with Civil 3D 2013 on them and out of the six two of them have this happen on a regular basis. If I were to go over to the other four machines, there are no issues when we open the drawing or publishing. Is there a setting in AutoCAD that we are overlooking?
View 2 Replies View RelatedI have x'ref a dwg. file in my current drawing. And when i print preview with the correct ctb style... The x'ref lines are not showing up?
I am having troubles showing the green, cyan and yellow color. when i print preview it doesnt show nothing. The true color is on RGB.
I am trying to use georectified cad file as a xref. The problem I am having is that the file doesn't place in the correct place. My file that I am working in is the same coordinate system. Is there a better way to do this? I've also tried copying and pasting, that doesn't work either.
View 6 Replies View RelatedI xrefed my surface to my sheet file and everything except the contours show, I evan tried a data shortcut to no avail. I checked vp layers and thawed /on all layers but no contours..
View 9 Replies View RelatedWhen i am making e-transmittal i am getting the message warning Xref broken reference , what are the causes for this.
View 4 Replies View RelatedI am looking for a way to make it so that I cannot select an xref. I want it to sit neatly in the background and leave me alone when I'm trying to select things in the current drawing.
I am trying to design roadways on a steep hillside and the contours are very close together such that whe I zoom out to the view the whole project, there is no space on the screen where there aren't several contours within my pickbox. I need the contours on so that I can layout around the topography, but in order to select the centerline of my road without clicking on the contours, I have to zoom in really tight and then select and zoom way out again to manipulate the other lines. It would really speed things up if the xref contours could not be selected at all.
I am currently trying to xref a Civil 3d files into auto cad 2d. So far on the model space it works fine however when i try to put it into paper space the labels on the profiles just seems to go crazy. See the attached picture. (First picture where the label are not displaying correctly in paper space and second drawing in model space of the same drawing which shows the labels correctly).
I believe its the annotation that civil 3d uses to generate these text labels but i am unaware of how this can be solved.
Existing surface profiles not showing in xref. Constantly have to reload xref for profile to show. Even on opening drawing, reloading xref is required.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
It is a question about xrefing Civil 3D profile style.
The Civil 3D file has a profile view showing 4 profiles, and 4 different profile styles are used for the purpose of comparison. When xrefing this file, the profiles are not shown the way they are defined in the profile style. It seems their appearances are controlled by layer properties. I just wonder if it is possible to transfer profile style through XREF?
Is there a way to toggle visibility of a corridor in a drawing where the model has been Xref'd into? The problem I am having is that we have one Model drawing that has a corridor.This Model is xref'd into multiple drawings. Not all drawings should show the corridor.
The only way I have found so far is to go into model and toggle the corridor on and off depending on which drawing I want to print or view. It creates problems when you want to run a Publish of multiple drawings because you always have to goof with the Model file. This seems a bit of a step back from being able to toggle visibility of objects in a drawing file with an xref atached and leaving it that way and ready to be printed at any time.
It appears that once I bring in an xref from another firm, I cannot not get it to display properly on screen. It was working on a previous drawing and now it doesn't. I know this explaination isn't very clear so I have attached two files that are print screens of my model space and my paperspace.
View 3 Replies View RelatedIs there a way to set up a layer filter to strip off the xref name?
I have standard layers in all my drawings. I want to use a filter to setup the type of drawing.. i.e erosion control.
However, from project to project the xref file name changes so filters don't work with the new name...
Anyway, if there is a way to hide the xref filename from the prefix of the layer.. if so, a standard layer filter would grab all the layers with the same name.
Civil 3D 2012 SP2
Win 7, 64 bit
I’m having a user profile issue on one computer. I have a user, using windows 7 and AutoCAD Civil 3D 2014 on his work station. When using Civil 3D he has two issues: one, he cannot import Dgn’s. I’ve tried everything it just won’t work. Second, he cannot xref or insert PDF’s into a drawing. Now the reason why I say this is a profile issue is because if I log on to his computer (or anyone else log’s on his computer), I can do all those things in Civil 3D, import DGN’s & insert/xref PDF’s. If this user log’s on my computer, he can do all those things in Civil 3D. Import DGN’s & insert/xref PDF’s. Something with his profile on his computer is corrupt and I’m trying to fix it without deleting and creating another user profile.
View 5 Replies View RelatedI have an alignment label that uses "dot blank" in the dragged state. In the drawings that the alignment is xreffed into, the leader converts to "closed filled".Why? How do i fix it?
C3D 2008
I have a feature line style where everything is set to ByBlock in the style editor. This way I can create feature lines and put them on different layers using one style while still plotting based on the layers the objects are on.
My problem is that I'm using style based plot styles. This is fine when I plot from the same drawing, but when I xref the file into a new drawing, everything takes on the properties of the layer the xref is on. So if I originally have bold lines and fine lines, once xrefed, everything becomes the same lineweight. Colors and line types work fine, just plot styles seem to act this way.
I do not recall this being the case in 2011. Is there something I'm doing different, or do I have to start creating new feature line styles for every lineweight we use? Is there a way to set ByBlock to only work to one depth?
Civil 3D 2013
Windows 7 64-bit
Xeon W3550 3.07 GHz
Nvidia Quadro 4000
12.0 GB RAM
We have our pipe networks living in a master file that is XREF'd to our sheet files. Now, the pipe and structure objects are all the layer C-PNET. The style for the pipes is comprised of the layers C-STRM-PIPE (for pipe walls) and C-STRM-PIPE-PATT (for the center line that is the width of the pipe). When I go into the XREF I cannot freeze OR change the color of the layers comprising the pipe style even though they are all set to ByLayer in the style dialog. The only way to freeze the network is to freeze the layer the pipe network is on C-PNET. However, this presents other problems with our file setup and we dont want to universally freeze C-PNET.
why we cant freeze the portions of the pipe network that are defined in the style as being on C-STRM-PIPE, and C-STRM-PIPE-PATT? If so, how do we remedy this?
Any way to force the checkbox in my attached pic to "Prompt to select nested objects"?
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760