AutoCAD Civil 3D :: Xref Label Alignments
Apr 29, 2013
I am currently trying to xref a Civil 3d files into auto cad 2d. So far on the model space it works fine however when i try to put it into paper space the labels on the profiles just seems to go crazy. See the attached picture. (First picture where the label are not displaying correctly in paper space and second drawing in model space of the same drawing which shows the labels correctly).
I believe its the annotation that civil 3d uses to generate these text labels but i am unaware of how this can be solved.
View 5 Replies
ADVERTISEMENT
Jul 26, 2012
I am looking to create a alignment label style within 2013 that allows me to create a label that looks somewhat like the following:
alignment 1
sta=xx+xx
alignment 2
sta=xx+xx
The label would be used at the intersection of 2 separate alignments.
View 5 Replies
View Related
Jun 12, 2013
Basically I have a centerline alignment for a roadway and another alignment for a retaining wall. They both have the same bearings and a common horizontal bend point, though the wall tapers off in another direction at the end. The issue I'm having is at the common horizontal bend point, when I label my retaining wall bend point and reference the centerline I get a different centerline station than what I should be getting. It appears that when Civil3D calculates the reference station, it uses the line segment after the bend point instead of the line segment before.
Is this dependent on a C3D setting and is it possible to change this?
View 4 Replies
View Related
Sep 19, 2013
I have binded an alignment drawing into another drawing. I am still able to use the alignments for calculations however they do not show up in toolspace. What is the reason for this? Can i export the alignments and import them without having issues now?
View 5 Replies
View Related
Sep 13, 2013
I have an xref...I can see the labels in model space but when I go to paperspace, I can not longer see them.
View 9 Replies
View Related
Mar 14, 2012
I have a block tha I use in a point label style. All of the block entities are on layer 0. The label style is also set to layer 0 so that it get on the same layer as the point. I've tried setting the block color in the label at by layer and by block. When a drawing that contains this label style is XREF'ed into another drawing, the block in the label always takes on the color of the current layer.
C3D 2011, Version 3
edit: I attached an example. The top figure is the point with the block in the label and the bottom is just the block itself.
View 3 Replies
View Related
Mar 4, 2013
Is there any reason to have aligments in a site instead of jsut under the general alignments?
View 3 Replies
View Related
Jun 8, 2012
How do I project the Proposed Road Level information from Road_1 at the intersection of Road_2 (Alignment_GA.jpg) onto the Start of the Profile for Road_2 (Alignment_Profile.jpg) to give me my tie in start point?
How do I obtain the exact change of the intersection Point? How can i extend Road_2 onto the horizontal curve of Road_1 so i know they exactly intersect?
View 1 Replies
View Related
Feb 12, 2013
I have a more than 10 number of alignments of road network in MX Road. I imported these alignments into Civil 3D. The problem is I am not able to edit these alignments.
View 4 Replies
View Related
Feb 25, 2013
I have more than 100 alignments of a road network in Civil 3d. I want to assign separate layer for each alignment. Is there any easy way to do this?
I changed the layers for a few alignments and exported them to Autocad 2007 format, but the centrelines were in single layer only.
CIVIL 3d 2011
DELL PRECISION T3500
View 9 Replies
View Related
Oct 31, 2013
I have two alignments that are not parallel that make up one corridor. Each alignment has a separate profile running along it. At stations where I have a template drop in my section editor, it is not representing what is really happening because it just is perpendicular to one alignment. Is there a way to develop a secondary alignment that will have my section editor show what will be parallel to both alignments.
View 1 Replies
View Related
Oct 11, 2013
How to join 2 alignments which are continuing a same road? Is it even possible ?
I have tried to explode them into polylines > join the polylines and then reconstruct the alignment again but it crashes on everything longer than 15 miles
View 5 Replies
View Related
May 8, 2012
The label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
View 1 Replies
View Related
Sep 6, 2012
C3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
View 1 Replies
View Related
Jan 3, 2013
Is there a way to "Edit Label Text" in a Parcel area label? Similar to the way you can edit it in other styles.
View 9 Replies
View Related
Feb 28, 2013
I am using Civil 3d 2012. What I have is a surface along railroad tracks. Each set of tracks has a different alignment because they aren't parallel. I have a baseline alignment with my stationing set on that. What I want to do is have one profile view showing the multiple track alignments based on the baseline alignment. I can't use the offset alignment because they aren't parallel.
View 1 Replies
View Related
Aug 10, 2012
I'm trying to create two offset alignments (one on each side of my centerline alignment). For some reason I can only create an offset alignment on the left side of my CL alignment, but not the right side.
View 7 Replies
View Related
Feb 20, 2013
I would like show all alignments in a combobox. I want do a application in C#.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
View 8 Replies
View Related
Apr 12, 2013
I created an alignment from the arcs at my intersections. When I go to the geometry editor under grid view it only shows the first curve.Does c3d support discontinuous alignments? When building edge of pavements at intersections is the workflow to make a new alignment for each intersection?
View 3 Replies
View Related
Sep 26, 2013
I cant get this one. I have created an alignment in a drawing and created a shortcut. When I data shortcut that alignment into drawing "A", its all good. Alignment starts at station 10+00. When I do the same data shortcut into drawing "B" the alignment is starting at station 0+83.33. Why?
View 5 Replies
View Related
Oct 28, 2013
I need to put a reverse curve on an alignment. I have tried using two free curve fillets,(between two entities, radius). the first curve was fine, but it would not allow the second curve. I also tried using a floating curve ( from entity radius through point) first, but it did not work.
View 2 Replies
View Related
May 1, 2012
Loving Pressure Pipes so far, taking us a bit to get them setup to work the way we want.
Using Pressure Pipes to design two water mains, the first main is a straight run, and the second one starts off of a Tee that I added to the first. This part seems to be working fine, now when I go back and use the Create Alignment from Pressure Network to create the alignment for the first main everything seems fine, but the second one is where I am running into my problem. When creating it, if I don’t select the Tee that I used as the starting point the two alignments don’t intersect, however if I do select it something crazy happens, my start point for my second alignment snaps to 0,0 instead of the Tee. I have tried a couple of different times with both Tees and Crosses. I get a little bit of a different result with Crosses, if the cross is the start Point of the alignment it behaves the same as a Tee, snapping to 0,0, however if the alignment goes through the Cross it is created correctly.
View 3 Replies
View Related
Oct 31, 2013
We have a main line (1 Alignment) and some junctions on that main line (other Alignments), and out GOAL is to create GL (General Layout) sheets, showing Shading, Setting out and Dimensions..ETC.So every VFG (View Frame Group) i can generate cut sheets from it, the Question is
1- How can i "connect" all the VFGs you see in the image attached into one VFG so that i would create them together ?
2- OR should i make separate VFGs like you see i did already , and then create cut sheets for each VFG ?
3- Or am i the only one facing this Problem ?
View 9 Replies
View Related
Apr 11, 2012
Any way to label the slope stationing rather than horizontal stationing? This is common when doing long pipeline projects (40 miles) or more in very steep terrain. I am doing one now that is only 1 mile and the 2D verses 3D length is a difference of 100'. 40 miles that would mean it would be off 4000'. The client uses this stationing as a guide to know how much pipe they need. If you would do that horizontally that would be way off the mark.
I am using Civil 3D 2010? Maybe its included in 2012 or could that possibly be an option for future releases since it is a 3D software.
View 9 Replies
View Related
Jul 26, 2013
Is it possible to export a list of Alignment and/or Shortcuts (Drefs) from a drawing?
View 2 Replies
View Related
Nov 12, 2012
What is the benefit to numbering alignments?
Example: Street CL (1), etc.
When I have a street centerline alignment, I am failing to see any benefit. If I have a change, I want the change, not any old stuff. If I have a need to different alignments for differing purposes, I'd rather give each my own unique name. If I make a change, and I want that change easily reflected into a profile or corridor, wouldn't it be more efficient to let the name remain constant?
Do you allow the program to do this?
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
View 4 Replies
View Related
Aug 8, 2013
I'm trying to label my Profile label stations as raw stations, 20~20 meters, and I'm not being able to adapt the format to STATION 0, STATION 2, without any plus zeros or +, or -, or commas, or anything, as following in the image.
Is there a easy way to do it?
View 2 Replies
View Related
Jun 18, 2012
At our office We use alignments to designate the pipeline. At our pi.'s or points of intersection We have the autocrat _wipeout circle. It works fine in c3d 2011, but for some reason when We take them into c3d 2012 the wipeout circle goes under the red line instead of above. We have checked through the properties and can not find a display order. Otherwise We are currently inserting a wipeout circle and having to place on At every intersection.
View 2 Replies
View Related
May 2, 2013
I need to include the data definition for 120 elements . I'll insert it at a word report.
Civil 3D (2013)
View 2 Replies
View Related
Mar 18, 2013
I have a problem of getting exact numbers on my civil 3D. I have a line of 900 feet. I create a line of hundred feet. But when I create and alignment, I get 108+00 and length of 10800 feet.
View 3 Replies
View Related
Oct 29, 2013
We have a HUGE number of data referenced surfaces and alignments that need to be moved to a different group of folders. Is there a simple way to do this without breaking the references (each surface/alignment) is referenced into multiple drawings.
The project was divided up into a bunch of little mini projects so now we have 500150_A, 500150_B etc (around 90 of them). Each one has a dwg file with a surface and at least one alignment and that drawing is data referenced to all the other sheets within that mini project. Each project has _Shortcuts, drawings etc.
The powers-that-be have decided to 1) change the project number (from 500150 to 500152) and 2) to bring all these mini projects together into ONE project.
We've confirmed that each surface/alignment has a unique name which means that there shouldn't be a conflict in that regard.
View 2 Replies
View Related
