Drawing contains Xrefs which are either unloaded or unresolved and do not show up in the base drawing.
I am unable to reload but can detach some of them.
When I try to Xref a new file it does not function. Makes no differerence whether its an attachment or an overlay.
How do you convert a read only dwg to a fully functional dwg? I had to force quit AutoCAD when I got the rainbow spinning wheel (on Mac) and now when I reopen, it says it is currently in use and would I like to open the read only version. Meanwhile, I can't save any changes in this version! Am I royally screwed? Is there a way to convert back to normal?
View 3 Replies View RelatedInventor Suite 2011.
In optimizing a new assembly I'll often have several iterations where I take an assembly to a point and would like to keep that design intact, yet would like to move on from there with new design features based off that existing design.
Currently this is the way I archive these fully functional design iteration steps that may be created just a few weeks apart.
Open assembly - save as "LinkageDesign-7.iam"
Open each part individually - save as next part # sequence...
In the new assembly then RMB click on each part and replace with new part # sequence that I just saved.
Parts keep all their contraints and are ready for me to start adjusting, all the while having the other version still intact so I can compare directly 2nd iteration with 7th iteration.
A way to do this with fewer clicks? As the larger the assembly the larger the task at completing this.
I just had my HD drive replaced on my Mac Book Pro ( Using Mt Lion OS) which forced me to reinstall all my programs. I reloaded CS4 without problem getting a message that installation was successful.
However I am having problems with the tool bars. When I click on the one of the default tool in the box it works fine, however if I try to open that tool for more options by clicking on the little black triangle nothings happens either in Photoshop or Illustrator(the two programs I use most) the box won't open up.
Since I installed Mac 10.5.8 my PS 7 will not function, and an error message pops up that says it cannot be used. I purchased PSE 10 to update Photoshop and it says there is not enough memory to install it. I figured if I uninstalled PS 7 that should free up enough memory, but don't know the correct way to do it.
View 1 Replies View RelatedThe clone and healing tools just stopped working on CS3, Windows XP. I check the obvious like correct layer selected, blend mode, ...
The paint tool works fine.
I am trying to attach pdfs to my drawing. I am receiving the following message "acdwfmarkupcore.arx cannot find a procedure that it needs." I am also receiving a message that says the pdf (file) is corrupt. I have opened the file and it appears fine. I have even tried re-saving the original document under a different name.
View 5 Replies View Relatedi type in xr and the box shows up but when i go to attach a dwg or image the box usually shows up so i can browse through and find the dwg i want to xref but the box doesn't show up all it says at the bottom in the command line is ATTACH
If i use the command classicxref then everything is fine i can attach anything i want. i checked the filedia and it is set to (1)
I am xrefing a DGN file into my DWG file in Civil 3d 2012. When I go into Layer Manager I cannot see any of the DGN's Levele/Layers? Tell me this isn't so? Am I missing something here, how is one suppose to control Layers in the DGN when it is XREF'd into a DWG?
View 4 Replies View RelatedWhen i change a linetype in an xref file and then reload the file, The linetype does not change in the file i am referencing the drawing in, leaving me to manually change the linetypes within the drawing.
View 1 Replies View RelatedI am having problems bringing in an xref dwg in a viewport. The scale for my stationing labels are huge and I cant remember how to fix it.
View 8 Replies View RelatedMy InDesign CS6 cannot function hardly at all when I try to edit this one 10 page document. It has a lot of graphics, but still, what should I do? Do you think the file is corrupt? My InDesign works well with all other documents. I have seen this before with some 4 pg documents that have a lot of pictures. Should I be making them as books rather than documents? I've never used the book setting before.
View 2 Replies View RelatedCan I somehow xref a surface into a drawing and use it to create profiles, sections, gradings etc?
View 2 Replies View RelatedEvery time I attach an XREF file, the xref drawing is shaded and is very difficult to see. Having looked through a good deal of the COMMANDS & properties trying to make Xref's more visible, without binding them into my original drawing.
View 5 Replies View RelatedI have an xref...I can see the labels in model space but when I go to paperspace, I can not longer see them.
View 9 Replies View RelatedI am getting a lot of grief xrefing a C3D file into an AutoCAD drawing. A bit of background...
Fairly large development project with 270 new familiy houses. The sanitary sewer (SS) network was created using AutoCAD only. All layout drawings and xrefs were created using AutoCAD using AutoCAD templates. Then, here I am, putting the entire SS network in C3D, with its fancy labels and relevant long sections. Now I am supposed to display this C3D network in all the layout plans and get rid of the old 2D SS xref. Well, the blody thing doesn't work! If I try to xref the original C3D file, it will only display the labels. All pipes and structures and long section do not display. Yes, I checked all layers are turned on.
I tried using data shortcuts instead, bringing first the relevant part liist and styles. No luck. Again neither a single pipe nor structure is diplayed, although the prospector in the toolspace shows the network is referenced in the drawing. I am not sure if this matters, but the C3D source drawing contains a second pipe network referenced using data shortcuts which, by the way, doesn't display either when xrefing. I tried xrefing the C3D file using my C3D template and it works fine. So I guess that, somehow, the AutoCAD template used to creat the drawings is preventing some C3D objects to be displayed when xrefed.
I know I could recreate all our layout plans using my C3D template. Unfortunately, that would be a long process since we have quite a few and they're all heavily xrefed, with many layer properties overriden.
C3D 2011V2. Windows XP 64b
I'm writing a .NET app to get corridor feature line information from an XREF'd dwg file to use in the active document. I'm having quite a bit of trouble reading the civil objects from the XREF.
[URL]........
This works, but still doesn't work for civil objects. Take a look at the snippet below.
if (xdb != null) { // Start a transaction in our loaded database // to get at the layer name Transaction tr2 = xdb.TransactionManager.StartTransaction(); using (tr2) { // Open the layer table LayerTable lt2 = (LayerTable)tr2.GetObject( xdb.LayerTableId, OpenMode.ForRead );
In order to get a Corridor ID collection I need a reference to a CivilDocument object. So how do I get a CivilDocument object when it isn't the active document? Is there any way to get it from a Document or Database object?
I created a pipe network in civil3D and now I want to insert it as an xref in an autocad file. The problem is that when I do so, I lose some properties, such as the hatches in the directional arrows of the pipes and the background mask property of the structure labels.
View 2 Replies View Related I'm trying to get a handle on what should and should not be expected to work as far as labeling XREF'd entities goes. I'm using 2011.
I have recently had bearing notes associated with an XREF'd line disappear, and I can't pinpoint the cause.
I had edited a couple of lines in said XREF'd drawing, but NOT the one that was associated with the C3D notes. There are two C3D drawings that XREF this drawing and that have line labels applied to the same, unchanged, line. Yet, all of those labels were gone (in both drawings) when I opened them this morning.
So, should labeling an XREF'd entity work? Are labels predictably lost when a labeled line undergoes a known set of modifications (Sinc relayed his experiences here: [URL] .....
What if the XREF'd drawing is simply saved, with no changes made to a labeled line? Should that be okay?
If labeling XREF's is known to be unpredictable, it sort of puts us back to manual text labels and manual curve tables. Is that really what people are having to do?
I am having a issue when I open a drawing with a profile or a surface xreferenced into it, the profile drawing or the surface drawing needs to be reloaded every time in order for it to appear. This becomes very cumbersome when we try to publish a set and have numerous plan and profile sheets and then the profile doesn’t appear. We have six identical machines in our office with Civil 3D 2013 on them and out of the six two of them have this happen on a regular basis. If I were to go over to the other four machines, there are no issues when we open the drawing or publishing. Is there a setting in AutoCAD that we are overlooking?
View 2 Replies View RelatedI have x'ref a dwg. file in my current drawing. And when i print preview with the correct ctb style... The x'ref lines are not showing up?
I am having troubles showing the green, cyan and yellow color. when i print preview it doesnt show nothing. The true color is on RGB.
I am trying to use georectified cad file as a xref. The problem I am having is that the file doesn't place in the correct place. My file that I am working in is the same coordinate system. Is there a better way to do this? I've also tried copying and pasting, that doesn't work either.
View 6 Replies View RelatedI xrefed my surface to my sheet file and everything except the contours show, I evan tried a data shortcut to no avail. I checked vp layers and thawed /on all layers but no contours..
View 9 Replies View RelatedWhen i am making e-transmittal i am getting the message warning Xref broken reference , what are the causes for this.
View 4 Replies View RelatedI am looking for a way to make it so that I cannot select an xref. I want it to sit neatly in the background and leave me alone when I'm trying to select things in the current drawing.
I am trying to design roadways on a steep hillside and the contours are very close together such that whe I zoom out to the view the whole project, there is no space on the screen where there aren't several contours within my pickbox. I need the contours on so that I can layout around the topography, but in order to select the centerline of my road without clicking on the contours, I have to zoom in really tight and then select and zoom way out again to manipulate the other lines. It would really speed things up if the xref contours could not be selected at all.
I am currently trying to xref a Civil 3d files into auto cad 2d. So far on the model space it works fine however when i try to put it into paper space the labels on the profiles just seems to go crazy. See the attached picture. (First picture where the label are not displaying correctly in paper space and second drawing in model space of the same drawing which shows the labels correctly).
I believe its the annotation that civil 3d uses to generate these text labels but i am unaware of how this can be solved.
In a new Illustrator file, I select "Object...Graph...Graph Type" and make sure I have pie graph selected. Then I draw the circle I want to be a pie graph, make sure it's selected and choose "Object...Graph...Data" which opens the graph data entry "spreadsheet" but the text box and buttons on the top are greyed out and there are no visible cells. If I move the pointer around inside the window, it does become the "row/column" resize pointer as if there are cells present but disabled.
View 1 Replies View RelatedI am having an issue with Premiere 6.0 that I can't seem to solve. Some audio clips are showing up in red in the timeline and they just don't work at all. Here is how this went down.
I had to format my computer due to Windows related troubles and so I reinstalled the OS, installed all of my Adobe software and dropped the files back into their original locations. When I fired up premiere and opened the project, everything was looking fine and dandy until certain clips showed up in red and just didn't work.The only clips that were affected were audio tracks from AVI files that I separated from the video. They are not missing , premiere knows where they are and if I drag one into the timeline it will work just fine.
Existing surface profiles not showing in xref. Constantly have to reload xref for profile to show. Even on opening drawing, reloading xref is required.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
It is a question about xrefing Civil 3D profile style.
The Civil 3D file has a profile view showing 4 profiles, and 4 different profile styles are used for the purpose of comparison. When xrefing this file, the profiles are not shown the way they are defined in the profile style. It seems their appearances are controlled by layer properties. I just wonder if it is possible to transfer profile style through XREF?
Is there a way to toggle visibility of a corridor in a drawing where the model has been Xref'd into? The problem I am having is that we have one Model drawing that has a corridor.This Model is xref'd into multiple drawings. Not all drawings should show the corridor.
The only way I have found so far is to go into model and toggle the corridor on and off depending on which drawing I want to print or view. It creates problems when you want to run a Publish of multiple drawings because you always have to goof with the Model file. This seems a bit of a step back from being able to toggle visibility of objects in a drawing file with an xref atached and leaving it that way and ready to be printed at any time.