We've carried out a company upgrade of AutoCad to 2014. Since then a fair few PC's display an odd behavior of rapidly flashing bottom toolbars when more than one drawing is open at a time. One PC resolved this by upgrading their video driver.
View 1 RepliesI've tried to figure out the pattern of how the command works for inputting partial customization menu toolbar names but I'm unsuccessful.
You should be able to show and hide partial customization menu toolbars with the -toolbar command because it can hide all toolbars including my partial customization menu toolbars currently shown. I've tried the toolbar menu alias (defined in the CUI command) and the name (refer to this link to the same image embedded below) and none work.
The one with the two "YY"'s on it, side to side arrows and zoom?Can I hide the whole toolbar to make the preview bigger?
View 2 Replies View Relatedfilmstrip appears on bottom but the compare option, before and after and slide to enlarge grid view are all missing.
View 6 Replies View RelatedHaving issues with 2013, somehow switching to bottom view. Open a drawing and everything looks normal except when I look at the viewcube and I am looking up from the bottom.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
How can I get the upper toolbar back?
View 1 Replies View RelatedWe export our renders to be used in a GUI and for some reason the bottom of our renders since last week (to be fair we only have one user who exports - so only one user has this problem) have a solid black line on the bottom. Now this wouldn't be a horrible problem except we have to set a transparency color in our control software and since the background is not uniform it is VERY obvious when in our final software package. We also have to maintain a constant resolution or the control systems (what we use the renders in) will distort and be way off.
Here is a sample: [URL]....
This happens in both 2013 and 2012. Perhaps there are some lightning/render settings I can try changing on this users machine?
I feel as though there is a shortcut for this problem. In this simple 3D model, I need to "cut" out the excess volume from the bottom of my 3D model. The thickness at all walls needs to be 1mm. Is there a simple solution to "vaccum" the extra space out from the bottom? The top shows the compartments.. but the problem is the excess space underneath.
View 3 Replies View RelatedRunning 2014 plain Jane. I have the ribbon turned off. Sometimes (a lot) when I double click a block to edit it my Block Editor Toolbar does not come on. And it is not listed in the acad list of tool bars.
View 9 Replies View RelatedSometimes on my "Draw" toolbars, all of my icons disappear! Passing the cursor over it, than they reappear! Made same thing in ACAD 2012.
My video card is a NVIDIA Quadro 600 with the latest driver installed.
Win 7 64
16gb RAM
Xeon 3.07
Toolbar macros I've been using for several versions now are not working in LT 2013?
Here an example of one of the macros:
^C^C_select;_auto;\_copy;_p;;@;@;_move;_p;;\_rotate;_p;;@;\_redraw:
I have installed AutoCAD 2013 student on my Laptop (Win7 32Bit) and want to work now.
But I have the problem that my Menubar always freezes / becomes instabil.
-> When I open ACAD, the menu bar is by default on "Home", when I click on the tab "Insert", the tools of "insert" aren't visible, there are still the tools from "Home" shown (Line, Polyline, Circle etc.)
But when I click on these wrong shown tools, the tools of "Insert" become active. (Only the 'surface' doesn't react)
Well, I see always the Home-tools. All the other tools aren't displayed to me, but they work (if u know where they are, you can guess and click and hope you hit the right one )
I am using LR 4.3 with Photoshop CS5. I have found that after editing a picture in photoshop (transfer from CR2 to .TIFF file) it correctly transfers back into LR as an updated .TIFF file with all edits from PS. However, on further editing of the picture in LR the image is refreshed after EACH edit (ie. file reloads into LR taking a few seconds). If I am trying to apply an edit as the refresh starts then that edit gets lost i.e. NOT applied. The refresh happends after ANY change to the file. It is very frustrating as it wastes time and makes editing slow (have to keep waiting for a refresh). It does not appear to happen in that way when editing CR2 files.
I have only noticed this feature since installing V4.3 although it may have been happening in previous versions.
I am using W7, i5 2.5 Ghz processor and 8 GB ram with dual screens.
I just switched from Autocad 2007 to 2013. how to display the object snap toolbar? the one with center snap, mid-point snap, etc options?
View 3 Replies View RelatedI made my first installation of Autocad 2013 on this computer. Unfortunately the quick access toolbar appears whitened as you can see in the attached picture.
View 8 Replies View RelatedI'm trying to add a script to toolbar button from the server. The macro I'using is
^C^CSCRIPT;"//server/path1/subpath1/HVAC-DUCTS.SCR";
The message I take from autocad is "CANT FIND FILE"
How do I reload a custom toolbar after uninstalling-reinstalling AutoCAD 2013?
View 2 Replies View RelatedPhotoshop CS4 v11.0.2 winXP pro sp3
If one uses e.g. canvas size and chooses a smaller canvas, normally a panel appears 'the new canvas size is smaller, some clipping will occur, proceed or cancel. Likewise if you print something and its wider than the pagesize, you see a message panel appear, the image is larger..some clipping will occur, proceed/cancel.
These panels have ceased showing, but unless one clicks proceed or cancel on them, photoshop cannot progress,...not responding results. Trouble is you dont know if they have shown up but are hiding. Tried moving the image but it leaves a white space behind and the panel is not behind anyway, or under the main photoshop window.
If you launch e.g. word and print something, then minimise, often the panel then shows itself, from then on its ok ! Until one closes Photoshop then its back to its freezing ways next time after launch until refreshed with Msoft word printing, though that doesnt always resolve it.
It also freezes up when closing images using the X top right of image. I had thought I had spoted a trend to fall over on jpg images but not so I think now.
Tried for a full reinstall, no joy. updated video driver ATI radeon HD3450, the ATI driver wouldnt go on, couldnt find a suitable driver it said !... but the one from the Dell website did, turns out to be the same ! 1/12/2008 8.561.0.0 though ATI have a more recent one Feb 2010.
We also run Sophos antivirus.
Why does the layer control toolbar always state the Xref layers by default. Is there a workaround, or a setting so the layers of the current drawing are displayed by default?
View 2 Replies View RelatedIs there a way to create a blank toolbar to add custom buttons to?
View 1 Replies View RelatedI made a toolbar button with the macros @, and tried also @ pause.
I need this in order to shorten the procedure for relative coordinate input, but, after pressing the button the last point is entered and i cannot continue entering values like in the manual input at the command like, like: @5,5
Even if i use the "@ pause " sequence it doesn't work.
How to wait for user input?
I have a series of sheets, each with two viewports to show two plan views of a long road alignment. I arranged them to read bottom to top, as it goes up stationing, as we do with cross section sheets, but have been told by an outside reviewer that the sheets are confusing and should read top down.
How would you arrange them?
I need to start doing shaped glass drawings for our new glass supplier who insists everything is viewed from outside. Unfortunately all our drawings are viewed from inside and I don't want my team to be responsible for copying and flipping glass details in case they forget to flip one day.
I can obviously mirror the viewport view by clicking View/Views/Bottom but this is also mirroring any text dimensions, even though my Mirrtext preference is set to 0.
Is there a way to set a dimension style where the text is automatically back to front so it will then appear the right way round in that particular viewport. How to get round this problem without duplicating parts that can then get missed at a later date and not amended?
This needs to work in both AutoCAD 2014 and AutoCAD LT 2014 as we run a mixture in our office.
On some computers I have a problem. The down arrow at the right of the quick access toolbar doesn't show. I checked that my interface is not lock too. So to customize the quick access toolbar I have to use the CUI.
I don't know if it's related, but my customize toolbar (from my partial menu) have to be displayed manually each time I start AutoCAD but not my custom tab in the ribbon.
Our office recently upgraded from AutoCAD 2005 to the new version AutoCAD Architecture 2013. I’m having difficulty finding the layer override toolbar for the lines. I have found that I can change the color and/or line type of an line in the properties dialog box but in AutoCAD 2005 there was a toolbar specifically assigned for the color, line type and line weight of a line. Dose that toolbar still exist in 2013 or do they control this in another location.
View 9 Replies View RelatedI've installed 3ds Max Design 2013.
I don't like small undo/redo window in quick access toolbar. So I always use 'max2009' style toolbar in UI customization.
but in 2013version, there are all dropdown icons are broken
So I changed to Default UI and changed again just color to 2009 style color.
but I cannot roll back this undo/redo step window to 2009 style.
I tried add 'undo scene operation' but it doesn't shows step windows.
So i've been able to successfully import a single block at a time into an active drawing, now i'm trying to insert the same block multiple times to essentially create a layout within the drawing. How would i go about inserting a selected block "x" amount of times. What i've got so far is this:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
[Code] .....
ideally this next section will iterate the import process "x" amount of times and allow for effetive block placement!
Below is part of some code that i had used to copy a paperspace layout "x" amount of times. I understand the iteration part but am not sure how to apply it to a block. I don't know how to reference the block that i intend to insert and then have it populate "x" amount of times.
/*
for (int i = 1; i <= numLayouts; i++){
lm.CopyLayout("Layout1", "SP-" + i.ToString());
Layout layout = (Layout)trx.GetObject(lm.GetLayoutId("SP-" + i.ToString()), OpenMode.ForWrite);
}
[Code] .......
I have to repeatedly draw a circle with 3P option.
I first invoke the circle command, choose the 3P option.
In my second and subsequent cycles, I click "enter" and have to click "3P" again.
Is there a way my chosen option of "3P" is invoked by default on one or two clicks of the spacebar or enter button?
I try to freeze layer in ACAD LT 2013 from Layer-II toolbar menu but it is not working.
View 1 Replies View RelatedIt appears that the Layer Filters functionality is broken again with 2013. Unchecking the "Apply layer filter to layer toolbar" disables the function of layer filters in the tool palette.
View 5 Replies View RelatedI am repeatedly running into the same problem of a data linked table losing its formatting upon closing and opening the file.
Each time this happens, I am forced to enter the properties tab and return the height of the text and the height of the cell to the size that it had originally been. Is there an option that I have not seen? What is continuously causing this error?