im a noob at photoshop, i just started a few days ago. (use it to texture for 3d stuff) and im getting a few problems with it.
the main problem is that none of the command keys are working (stuff like Ctrl + Z for back and Ctrl + Y for redo) also some other commands are not working. Does anyone know whats going on?
Using ligntroom 4 from the cloud setup, is there any kind of setting I can use to defeat the big blotto sign that pops up just under center screen in "Develope" mode when you Ctrl-z (undo)/Ctrl-y(redo)?
When you have the image in single image view and so quite large, when in full screen, that UNDO thing pops up right in the most likely place you are carefully watching to see the changes. And it is absolutely huge, at least for something that is apparently meant to be a gentle reminder for the event where you didn't do it on purpose.
Maybe a small picky thing but I can think of no reason that sign needs to be so "In your face", why not down in a corner and in font many times smaller.
At any rate, what can I do to get rid of it or move it to a less obnoxious location?
Is there any way to restore the classic undo/redo buttons (with r-click functionality) without the need to load the 2009 UI preset? I have Max 2013 already set up with a fairly complex custom UI so I don't want to have to recreate that after loading the 2009 style preset just to get my undo/redo buttons back. The ones in the Customize menu don't support the multiple undo/redo via right-click.
And while I'm on the subject...is there any way to simply get rid of the irritating Quick Access Toolbar? I find it telling that whoever designed it put a save button next to the undo. Shows they never worked in production
Even with a simple IPT that only has a handfull of features, at times it takes a long time (3-5 minutes, sometimes longer) for Inventor to execute a undo or redo command.
Undo file size setting in Application options is set at 1MB (which is teh same setting I used in previous versions).
I've tried to figure out the pattern of how the command works for inputting partial customization menu toolbar names but I'm unsuccessful.
You should be able to show and hide partial customization menu toolbars with the -toolbar command because it can hide all toolbars including my partial customization menu toolbars currently shown. I've tried the toolbar menu alias (defined in the CUI command) and the name (refer to this link to the same image embedded below) and none work.
I used to export layers by deleteing the ones I didn't want, then exporting as an illustrator file, then undoing all the layer deletions.
Recently I had to switch up so that I call another plugin which inserts information into the file I'm working on. Then that plugin sends control back to the original to do all the ai file exporting I mentioned above.
Somehow after I get controll back I cannot undo the layer deletions. Does it have something to do with the "nested plugins" notes in the contexts sections of the undo documentation.
I have to confess I don't fully understand these "contexts". Also if there's another way to export a layer of a file other than deleting all the other ones.
Our office had an update of both computers and software recently and as a result, our AutoCAD no longer has a toolbar option for creating PDF's. We were using 2007 and got updated to 2011. Before the updates, we had a toolbar feature that was specifically for creating PDF's, individual and batch. How I can get that toolbar back? If it matters at all, we also updated from Acrobat 8 to 10.
I accidentally deleted the side (left side default) tool bars and how do i get them back?? I cant find the buttons in the main toolbar (top).I got the properties toolbar back but i am still wondering how to get the level toolbar back(that shows you all the different views)
I'm currently running AutoCAD Electrical 2013 and every time I open a new drawing my undo is automatically disabled. Sometimes even changing from sheet to sheet in a project will result in my undo command being disabled. When I use the UNDOCTL command I seem to default to 48 and when I use UNDO to re-enable it I select the "All" option which gives me a 53 back for UNDOCTL, meaning that undo has been re-enabled.
Since AutoCAD preserves the entire database list of commands used on a drawing from the beginning, is it possible to "back up," like using undo, after a drawing is saved and closed? Is there a way to come back the next day and start undoing the previous day's work?
I think it'd be so cool to be able to replay your entire undo history of a picture, so you can see and show others how you proceeded on a picture you made. That way, it's never necessary to capture screen video for like 10 hours and stuff..
So first you'd need to add an option to save the undo history (so that you always keep the history from when you started). Then you'd need an option to playback the undo history.
I have a problem understanding how undo marks are added to the undo stack.In the code below a fan of lines are draw in a random location.If you run MTest a few times, the AutoCAD Undo command will remove the fans one at a time.
If you run MMulti to draw 10 fans, the AutoCAD Undo command will remove all the fans in a single step.I want to be able to remove the fans one at a time.I thought that a StartTransaction / Commit pair would act as markers for the undo stack, but this isn't working.
Tested on AutoCAD 2010 VS 2008 <CommandMethod("MMult")> _ Sub testmult() Dim i As Integer For i = 1 To 10 Call testdraw() Next End Sub [code]....
Is there a known problem with 2013 undo? I can be in a new drawing issue 2 commands and the undo drop down is populated with 100's of group commands, makinf Ctrl z useless
Civil 3D 2012 & 2013 HP Z210 Workstation Intel Xeon CPU E31240 @ 3.30 Hz 12 GB Ram
Note: Its all Resistentialism, so keep calm and carry on
I have this heavy issue, i can't send to back a line, an object or a hatch under other lines. In 2012 i used this feature a lot but in 2013 it's not working very much, maybe 1 time out of 10 and i absolutely can't say why.
HPDRAWORDER = 1 seems to work with a new hatch.. but i can't redraw everything.
Let's say i put an entire floor plan into block then draw over it. (I don't want to start a Xref discussion please) i can't send the entire bloc to the back.I used to do that with 2012, 2008, 2007.. but it's 2013 it's not working, is there a way to correct that?
I open the file to the model. My RAM usage is about 33%. Next, I open the first layout and my usage climbs to 43%. I open the second layout and my usage climbs to 52%. I open the third layout and my usage climbs to 62%.
I can go back and view the layouts already opened marginally faster then when first opening them, and my RAM usage will not increase.
If I continue to open new layouts, my computer will spend all its RAM holding these and freeze. My computer will suspend graphical processing and be forced to run on sips of RAM until all active commands are finished. But RAM usage will never decrease.
I have been working with my Windows Task Manager open in the corner, watching this happen. This way, I can save and close the file to clear the RAM and then proceed to reload the file and continue working on my file with 34 layouts.
I do not know if it is a function of storing the UNDO functions, or just how the program is designed, but this is a problem for me.
QUESTION
Is there a way to clear the UNDO or layout memory without closing and reloading the file? I do not have to close AutoCAD - just the file.
ATTACHEMENT
The attachement is a screenshot of my Task Manager.
I started with TM, browser, and AutoCAD open (I had already started writing this post)
I opened the file to the model.
Opened up 6 layouts (you can see the bumps)
Saved (you can see the tiny rise)
Closed the file, but not AutoCAD (precipitous drop ;] )
Running 2014 plain Jane. I have the ribbon turned off. Sometimes (a lot) when I double click a block to edit it my Block Editor Toolbar does not come on. And it is not listed in the acad list of tool bars.
I have installed AutoCAD 2013 student on my Laptop (Win7 32Bit) and want to work now.
But I have the problem that my Menubar always freezes / becomes instabil.
-> When I open ACAD, the menu bar is by default on "Home", when I click on the tab "Insert", the tools of "insert" aren't visible, there are still the tools from "Home" shown (Line, Polyline, Circle etc.)
But when I click on these wrong shown tools, the tools of "Insert" become active. (Only the 'surface' doesn't react)
Well, I see always the Home-tools. All the other tools aren't displayed to me, but they work (if u know where they are, you can guess and click and hope you hit the right one )
I made my first installation of Autocad 2013 on this computer. Unfortunately the quick access toolbar appears whitened as you can see in the attached picture.
